Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. J. Macek et al., “Status of the Experimental Studies of the Electron Cloud at the Los Alamos Proton Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB035, pp. 3089-3091.
[n] H. Euteneuer et al., “High Precision Beam Energy Stabilisation of the Mainz Microtron MAMI”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B18, pp. 1930-1932.
[n] J. F. Esteban Muller, P. Baudrenghien, T. Mastoridis, E. N. Shaposhnikova, and D. Valuch, “High-accuracy Diagnostic Tool for Electron Cloud Observation in the LHC based on Synchronous Phase Measurements”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3677-3679. doi:10.18429/JACoW-IPAC2014-THPME174
[n] T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
[n] L. T. Jackson, “High Performance Magnet Power Supply Optimization”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1285-1289.
[n] A. W. Grau, T. Baumbach, S. Casalbuoni, S. Gerstl, M. Hagelstein, and D. Saez de Jauregui, “Development of Instrumentation for Magnetic Field Measurements of 2m Long Superconducting Undulator Coils”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD019, pp. 3129-3131.
[n] C. E. Montanari, A. Bazzani, M. Giovannozzi, P. Hermes, and S. Redaelli, “Recent measurements and analyses of the beam-halo dynamics at the CERN LHC using collimator scans”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2693-2696. doi:10.18429/JACoW-IPAC2023-WEPA022
[n] G. J. Waldschmidt et al., “Superconducting Cavity Design for Short-Pulse X-Rays at the Advanced Photon Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP212, pp. 2516-2518.
[n] J. B. B. Chen et al., “ABEL: The adaptable beginning-to-end linac simulation framework”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS012, unpublished.
[n] P. Belochitskii, “ELENA Project Status”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THPM1HA02, pp. 192-196.
[n] A. Thabuis, M. Koratzinos, G. Kirby, M. Liebsch, and C. Petrone, “The first superconducting final focus quadrupole prototype of the FCC-ee study”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2851-2853. doi:10.18429/JACoW-IPAC2024-WEPS65
[n] V. A. Lebedev et al., “Investigation on Relaxations in Electron Beams”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3243-3246.
[n] V. G. Khachatryan, T. Garvey, S. Reiche, V. Sahakyan, A. Tarloyan, and V. M. Tsakanov, “PSI-XFEL Sensitivity to Beam Main Parameters and Undulator Focusing”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP054, pp. 1208-1210.
[n] S. Takeda, T. Itoh, and K. Tada, “Ground Motion Studies near the Dam Site”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI117, pp. 2661-2663.
[n] T. P. Wangler et al., “Design of a Proton Superconducting Linac for a Neutron Spallation Source”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEA001, pp. 336-344.
[n] K. Saito, “Critical Field Limitation of the Niobium Superconducting RF Cavity”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PH003, pp. XX-XX.
[n] T. C. Fan, C. S. Hwang, C. H. Chang, and Ch. Wang, “Magnet Sorting Algorithms for a Prototype of the SRRC EPU”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P034, pp. 3536-3538.
[n] R. Veness et al., “Specification of New Vacuum Chambers for the LHC Experimental Interactions”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS026, pp. 1584-1586.
[n] E. V. Bulyak, P. Gladkikh, T. Omori, L. Rinolfi, and J. Urakawa, “Beam Dynamics in Compton Storage Rings with Laser Cooling”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD093, pp. 2123-2125.
[n] A. Browman, “LAMPF Hardware Beam Transmission Monitor Systems”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2237-2240.
[n] L. R. Hughey, “Record Capture and Acceleration Efficiency in the SURF-II 300 MeV Circular Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 461-464.
[n] I. Koop, E. Perevedentsev, and T. V. Zolkin, “Numerical Studies of Non-Linear Dynamics in BEP”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP087, pp. 1636-1638.
[n] A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
[n] T. E. Zinneman and B. M. Bardin, “I.U. Accelerator Control System Digital Multiplexer”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 616-618.
[n] J. Frisch, E. Doyle, and K. Skarpaas VIII, “Advanced Collimator Engineering for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH012, pp. 1258-1260.
[n] B. M. Bardin, S. A. Lewis, D. J. Plummer, and T. E. Zinneman, “Computer Control of the Indiana University Cyclotron Facility”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 490-500.
[n] T. Higo, H. Sakai, Y. Higashi, T. Takatomi, and S. Koike, “Precise Fabrication of X-Band Detuned Accelerating Structure for Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ15, pp. 1753-1755.
[n] M. B. Danailov, B. Diviacco, M. Ferianis, L. Giannessi, and M. T. Trov??, “Coherent Harmonic Generation using the ELETTRA Storage Ring Optical Klystron”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUCOS04, pp. XX-XX.
[n] Z. D. Farkas, “Beam Loading Compensation with Variable Group Velocity”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-40, pp. 410-412.
[n] T. Itahashi, T. Saito, I. Miura, and S. Ichida, “Design of Beam Diagnostics for the RCNP Ring Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-08, pp. 301-304.
[n] A. Hinton et al., “First test results of a short period superconducting helical undulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1243-1246. doi:10.18429/JACoW-IPAC2023-MOPM113
[n] J.-Y. Raguin, I. Wilson, and W. Wuensch, “Progress in the Design of a Damped and Tapered Accelerating Structure for CLIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB003, pp. 2724-2726.
[n] G. I. Batskikh, V. M Belugin, Yu. D. Ivanov, V. A. Konovalov, B. P. Murin, and N. I. Uksusov, “Accelerating Station Alternative for MEB SSC Parameters”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1903-1906.
[n] S. Fu, Y. Chen, and Z. Huang, “Study on Accelerator Noise Effects on a Far-Infrared FEL Oscillator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA21, pp. 237-239.
[n] H. Ghasem, G.-H. Luo, and A. Mohammadzadeh, “Utilization of Crab Cavities in the Designed QBA Lattice of Taiwan Photon Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA025, pp. 2538-2540.
[n] C. Boffo et al., “Fabrication of the New Superconducting Undulator for the ANKA Synchrotron Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD021, pp. 3135-3137.
For LaTeX
Use Complete Form
For BibTeX
References
- R. J. Macek et al., “Status of the Experimental Studies of the Electron Cloud at the Los Alamos Proton Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB035, pp. 3089-3091.
- H. Euteneuer et al., “High Precision Beam Energy Stabilisation of the Mainz Microtron MAMI”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B18, pp. 1930-1932.
- J. F. Esteban Muller, P. Baudrenghien, T. Mastoridis, E. N. Shaposhnikova, and D. Valuch, “High-accuracy Diagnostic Tool for Electron Cloud Observation in the LHC based on Synchronous Phase Measurements”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3677-3679.
- T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
- L. T. Jackson, “High Performance Magnet Power Supply Optimization”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1285-1289.
- A. W. Grau, T. Baumbach, S. Casalbuoni, S. Gerstl, M. Hagelstein, and D. Saez de Jauregui, “Development of Instrumentation for Magnetic Field Measurements of 2m Long Superconducting Undulator Coils”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD019, pp. 3129-3131.
- C. E. Montanari, A. Bazzani, M. Giovannozzi, P. Hermes, and S. Redaelli, “Recent measurements and analyses of the beam-halo dynamics at the CERN LHC using collimator scans”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA022, pp. 2693-2696.
- G. J. Waldschmidt et al., “Superconducting Cavity Design for Short-Pulse X-Rays at the Advanced Photon Source”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP212, pp. 2516-2518.
- J. B. B. Chen et al., “ABEL: The adaptable beginning-to-end linac simulation framework”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS012, this conference.
- P. Belochitskii, “ELENA Project Status”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper THPM1HA02, pp. 192-196.
- A. Thabuis, M. Koratzinos, G. Kirby, M. Liebsch, and C. Petrone, “The first superconducting final focus quadrupole prototype of the FCC-ee study”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS65, pp. 2851-2853.
- V. A. Lebedev et al., “Investigation on Relaxations in Electron Beams”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3243-3246.
- V. G. Khachatryan, T. Garvey, S. Reiche, V. Sahakyan, A. Tarloyan, and V. M. Tsakanov, “PSI-XFEL Sensitivity to Beam Main Parameters and Undulator Focusing”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP054, pp. 1208-1210.
- S. Takeda, T. Itoh, and K. Tada, “Ground Motion Studies near the Dam Site”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI117, pp. 2661-2663.
- T. P. Wangler et al., “Design of a Proton Superconducting Linac for a Neutron Spallation Source”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEA001, pp. 336-344.
- K. Saito, “Critical Field Limitation of the Niobium Superconducting RF Cavity”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PH003, pp. XX-XX.
- T. C. Fan, C. S. Hwang, C. H. Chang, and Ch. Wang, “Magnet Sorting Algorithms for a Prototype of the SRRC EPU”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P034, pp. 3536-3538.
- R. Veness et al., “Specification of New Vacuum Chambers for the LHC Experimental Interactions”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS026, pp. 1584-1586.
- E. V. Bulyak, P. Gladkikh, T. Omori, L. Rinolfi, and J. Urakawa, “Beam Dynamics in Compton Storage Rings with Laser Cooling”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD093, pp. 2123-2125.
- A. Browman, “LAMPF Hardware Beam Transmission Monitor Systems”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2237-2240.
- L. R. Hughey, “Record Capture and Acceleration Efficiency in the SURF-II 300 MeV Circular Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 461-464.
- I. Koop, E. Perevedentsev, and T. V. Zolkin, “Numerical Studies of Non-Linear Dynamics in BEP”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP087, pp. 1636-1638.
- A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
- T. E. Zinneman and B. M. Bardin, “I.U. Accelerator Control System Digital Multiplexer”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 616-618.
- J. Frisch, E. Doyle, and K. Skarpaas VIII, “Advanced Collimator Engineering for the NLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH012, pp. 1258-1260.
- B. M. Bardin, S. A. Lewis, D. J. Plummer, and T. E. Zinneman, “Computer Control of the Indiana University Cyclotron Facility”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 490-500.
- T. Higo, H. Sakai, Y. Higashi, T. Takatomi, and S. Koike, “Precise Fabrication of X-Band Detuned Accelerating Structure for Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ15, pp. 1753-1755.
- M. B. Danailov, B. Diviacco, M. Ferianis, L. Giannessi, and M. T. Trov??, “Coherent Harmonic Generation using the ELETTRA Storage Ring Optical Klystron”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUCOS04, pp. XX-XX.
- Z. D. Farkas, “Beam Loading Compensation with Variable Group Velocity”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-40, pp. 410-412.
- T. Itahashi, T. Saito, I. Miura, and S. Ichida, “Design of Beam Diagnostics for the RCNP Ring Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-08, pp. 301-304.
- A. Hinton et al., “First test results of a short period superconducting helical undulator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM113, pp. 1243-1246.
- J.-Y. Raguin, I. Wilson, and W. Wuensch, “Progress in the Design of a Damped and Tapered Accelerating Structure for CLIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB003, pp. 2724-2726.
- G. I. Batskikh, V. M Belugin, Yu. D. Ivanov, V. A. Konovalov, B. P. Murin, and N. I. Uksusov, “Accelerating Station Alternative for MEB SSC Parameters”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1903-1906.
- S. Fu, Y. Chen, and Z. Huang, “Study on Accelerator Noise Effects on a Far-Infrared FEL Oscillator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA21, pp. 237-239.
- H. Ghasem, G.-H. Luo, and A. Mohammadzadeh, “Utilization of Crab Cavities in the Designed QBA Lattice of Taiwan Photon Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA025, pp. 2538-2540.
- C. Boffo et al., “Fabrication of the New Superconducting Undulator for the ANKA Synchrotron Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD021, pp. 3135-3137.
Back to search