Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. E. Laxdal, G. H. Mackenzie, J. B. Pearson, G. Stinson, R. Worsham, and M. Zach, “Progress Towards H- Extraction at Triumf”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 559-562.
[n] G. Dutto et al., “The Upgrading of the TRIUMF Facility to 500 muA Operation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 326-329.
[n] C. Inguimbert, M. B. Belhaj, Q. Gibaru, D. Lambert, and M. Raine, “Extrapolated Range for Low Energy Electrons (< 1 keV)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4201-4203. doi:10.18429/JACoW-IPAC2021-THPAB210
[n] N. Solyak, V. Ivanov, C. S. Mishra, and K. Ranjan, “Study of Adaptive Alignment as Beam Based Alignment in ILC Main Linac in the Presence of Ground Motion”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN108, pp. 2963-2965.
[n] J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 386-389.
[n] T. Kaneyasu, Y. Iwasaki, S. Koda, and Y. Takabayashi, “Observation and Correction of Effects of Variably Polarized Undulator on Electron Beam at SAGA-LS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD031, pp. 3162-3164.
[n] K. Turaj et al., “Operation Experience with the LHC ACS RF System”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 911-914. doi:10.18429/JACoW-SRF2019-THP031
[n] L. Dalesio et al., “The LEDA Control System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP2, pp. 652-654.
[n] G. Penco et al., “The FERMI@Elettra Commissioning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOARA02, pp. 1293-1295.
[n] L. S. Stoel, M. Benedikt, M. A. Fraser, B. Goddard, and K. A. Brown, “Investigating Beam Loss Reduction with Octupoles During Slow Extraction in the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 822-825. doi:10.18429/JACoW-IPAC2018-TUPAF051
[n] P. Dijkstal et al., “Corrugated wakefield structures at SwissFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4828-4831. doi:10.18429/JACoW-IPAC2023-THPL153
[n] F. Burkart et al., “Conceptual Design Considerations for the 50 TeV FCC Beam Dump Insertion”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1356-1359. doi:10.18429/JACoW-IPAC2016-TUPMR047
[n] D. R. Anderson et al., “Design of a 6 MeV Electron Cooling System for the SSC Medium Energy Booster”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 836-839.
[n] R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2579-2582.
[n] C. Gonzalez-Ortiz and R. Ainsworth, “Single-bunch instabilities at the Fermilab Recycler Ring”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 676-680. doi:10.18429/JACoW-NAPAC2025-WECD03
[n] M. P. Howell et al., “The First ASME Code Stamped Cryomodule at SNS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC106, pp. 2465-2467.
[n] E. L. Garwin, W. B. Herrmannsfeldt, C. Sinclair, J. N. Weaver, J. J. Welch, and P. B. Wilson, “An Experimental Program to Build a Multimegawatt Lasertron for Super Linear Colliders”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2906-2909.
[n] S. Koda, Y. Iwasaki, T. Kaneyasu, and Y. Takabayashi, “Progress and Status of Synchrotron Radiation Facility SAGA Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA040, pp. 2579-2581.
[n] M. Shibata, “Superconducting RF Activities at JAERI”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B03, pp. XX-XX.
[n] R. E. Pollock, J. W. Hicks, and P. Schwandt, “Performance and Characteristics of the IUCF Injector Cyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1049-1052.
[n] C. Zhang, J. Cao, Q. Y. Deng, and Y. F. Sui, “A Laser Wire System at Electron Beam Transport Line in BEPCII”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR034, pp. 852-854.
[n] M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 698-700. doi:10.18429/JACoW-IPAC2014-MOPRI043
[n] V. G. Dudnikov, A. Dudas, and A. V. Aleksandrov, “Ribbon Electron Beam Source for Bunched Beam Profile Monitor and Tomography”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA15, pp. 916-918.
For LaTeX
Use Complete Form
For BibTeX
References
- R. E. Laxdal, G. H. Mackenzie, J. B. Pearson, G. Stinson, R. Worsham, and M. Zach, “Progress Towards H- Extraction at Triumf”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 559-562.
- G. Dutto et al., “The Upgrading of the TRIUMF Facility to 500 muA Operation”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 326-329.
- C. Inguimbert, M. B. Belhaj, Q. Gibaru, D. Lambert, and M. Raine, “Extrapolated Range for Low Energy Electrons (< 1 keV)”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4201-4203.
- N. Solyak, V. Ivanov, C. S. Mishra, and K. Ranjan, “Study of Adaptive Alignment as Beam Based Alignment in ILC Main Linac in the Presence of Ground Motion”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN108, pp. 2963-2965.
- J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 386-389.
- T. Kaneyasu, Y. Iwasaki, S. Koda, and Y. Takabayashi, “Observation and Correction of Effects of Variably Polarized Undulator on Electron Beam at SAGA-LS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD031, pp. 3162-3164.
- K. Turaj et al., “Operation Experience with the LHC ACS RF System”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 911-914.
- L. Dalesio et al., “The LEDA Control System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP2, pp. 652-654.
- G. Penco et al., “The FERMI@Elettra Commissioning”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOARA02, pp. 1293-1295.
- L. S. Stoel, M. Benedikt, M. A. Fraser, B. Goddard, and K. A. Brown, “Investigating Beam Loss Reduction with Octupoles During Slow Extraction in the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 822-825.
- P. Dijkstal et al., “Corrugated wakefield structures at SwissFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL153, pp. 4828-4831.
- F. Burkart et al., “Conceptual Design Considerations for the 50 TeV FCC Beam Dump Insertion”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1356-1359.
- D. R. Anderson et al., “Design of a 6 MeV Electron Cooling System for the SSC Medium Energy Booster”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 836-839.
- R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2579-2582.
- C. Gonzalez-Ortiz and R. Ainsworth, “Single-bunch instabilities at the Fermilab Recycler Ring”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 676-680.
- M. P. Howell et al., “The First ASME Code Stamped Cryomodule at SNS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC106, pp. 2465-2467.
- E. L. Garwin, W. B. Herrmannsfeldt, C. Sinclair, J. N. Weaver, J. J. Welch, and P. B. Wilson, “An Experimental Program to Build a Multimegawatt Lasertron for Super Linear Colliders”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2906-2909.
- S. Koda, Y. Iwasaki, T. Kaneyasu, and Y. Takabayashi, “Progress and Status of Synchrotron Radiation Facility SAGA Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA040, pp. 2579-2581.
- M. Shibata, “Superconducting RF Activities at JAERI”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B03, pp. XX-XX.
- R. E. Pollock, J. W. Hicks, and P. Schwandt, “Performance and Characteristics of the IUCF Injector Cyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1049-1052.
- C. Zhang, J. Cao, Q. Y. Deng, and Y. F. Sui, “A Laser Wire System at Electron Beam Transport Line in BEPCII”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR034, pp. 852-854.
- M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 698-700.
- V. G. Dudnikov, A. Dudas, and A. V. Aleksandrov, “Ribbon Electron Beam Source for Bunched Beam Profile Monitor and Tomography”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA15, pp. 916-918.
Back to search
