Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. W. Jang et al., “Developments of 4GSR BPM Electronics”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 87-89. doi:10.18429/JACoW-IBIC2023-MOP030
[n] J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
[n] M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 179-182. doi:10.18429/JACoW-MEDSI2016-TUPE11
[n] S. J. Werkema, “Control of Trapped Ion Instabilities in the Fermilab Antiproton Accumulator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR20, pp. 3397-3399.
[n] V. Serriere et al., “Status of HOM Damped Room-temperature Cavities for the ESRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP108, pp. 808-810.
[n] A. Matheisen, R. Bandelmann, K. Escherich, N. Krupka, and H. Morales Zimmermann, “A New High Pressure Rinsing System Established at DESY”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO073, pp. 794-796.
[n] A. Nassiri, T. Berenc, J. Foster, G. Waldschmidt, and J. Zhou, “A Photocathode RF Gun Design for a mm-Wave Linac-Based FEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB06, pp. 961-963.
[n] V. Chouhan et al., “Symmetric Removal of Niobium Superconducting RF Cavity in Vertical Electropolishing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB105, pp. 409-413.
[n] G. R. Neil, S. Benson, D. Douglas, and T. Powers, “High average power ERL FELS”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper FR102, pp. XX-XX.
[n] F. Thomas et al., “X-Ray Absorber Design and Calculations for the EBS Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 257-261. doi:10.18429/JACoW-MEDSI2016-WEAA02
[n] T. P. Perron, B. Ogier, A. Panzarella, E. Plouviez, E. Rabeuf, and V. Serriere, “New Preinjector for the ESRF Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC087, pp. 2195-2197.
[n] M. T. Lynch, L. Eaton, G. Lawrence, A. H. Regan, P. J. Tallerico, and C. D. Ziomek, “RF System Considerations for Large High-Duty-Factor Linacs”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-38, pp. 454-456.
[n] J.-G. Wang, N. Tsoupas, and M. Venturini, “3D Simulation Studies of SNS Ring Doublet Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT072, pp. 3865-3867.
[n] I. A. Ivanenko, I. V. Kalagin, V. I. Kazacha, and N. Yu. Kazarinov, “Getting Uniform Ion Density on Target in High-Energy Beam Line of Cyclotron U-400M with Two”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT007, pp. 335-337.
[n] M. Jonker et al., “The CLIC Machine Protection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB071, pp. 2860-2862.
[n] J. Friedrich et al., “Performance of the GSI HLI-RFQ”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 551-554.
[n] N. Banerjee et al., “Electron Cooling With Space-Charge Dominated Proton Beams at IOTA”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper S201, pp. 14-19.
[n] C. Kerns, J. Crisp, Q. Kerns, and H. Miller, “New Low-Level RF System for the Fermilab Booster Synchrotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 619-622.
[n] C. Steier, A. Biocca, E. Domning, S. Jacobson, G. Portmann, and Y. Wu, “Design of a Fast Global Orbit Feedback System for the Advanced Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH009, pp. 1252-1254.
[n] T. Uesugi, S. Machida, and Y. Mori, “Short Bunch Extraction Near Transition Energy”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D029, pp. 459-461.
[n] V. Chouhan et al., “Recent Development in Vertical Electropolishing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THBA02, pp. 1024-1030.
For LaTeX
Use Complete Form
For BibTeX
References
- S. W. Jang et al., “Developments of 4GSR BPM Electronics”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP030, pp. 87-89.
- J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
- M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 179-182.
- S. J. Werkema, “Control of Trapped Ion Instabilities in the Fermilab Antiproton Accumulator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR20, pp. 3397-3399.
- V. Serriere et al., “Status of HOM Damped Room-temperature Cavities for the ESRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP108, pp. 808-810.
- A. Matheisen, R. Bandelmann, K. Escherich, N. Krupka, and H. Morales Zimmermann, “A New High Pressure Rinsing System Established at DESY”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO073, pp. 794-796.
- A. Nassiri, T. Berenc, J. Foster, G. Waldschmidt, and J. Zhou, “A Photocathode RF Gun Design for a mm-Wave Linac-Based FEL”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB06, pp. 961-963.
- V. Chouhan et al., “Symmetric Removal of Niobium Superconducting RF Cavity in Vertical Electropolishing”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB105, pp. 409-413.
- G. R. Neil, S. Benson, D. Douglas, and T. Powers, “High average power ERL FELS”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper FR102, pp. XX-XX.
- F. Thomas et al., “X-Ray Absorber Design and Calculations for the EBS Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 257-261.
- T. P. Perron, B. Ogier, A. Panzarella, E. Plouviez, E. Rabeuf, and V. Serriere, “New Preinjector for the ESRF Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC087, pp. 2195-2197.
- M. T. Lynch, L. Eaton, G. Lawrence, A. H. Regan, P. J. Tallerico, and C. D. Ziomek, “RF System Considerations for Large High-Duty-Factor Linacs”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-38, pp. 454-456.
- J.-G. Wang, N. Tsoupas, and M. Venturini, “3D Simulation Studies of SNS Ring Doublet Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT072, pp. 3865-3867.
- I. A. Ivanenko, I. V. Kalagin, V. I. Kazacha, and N. Yu. Kazarinov, “Getting Uniform Ion Density on Target in High-Energy Beam Line of Cyclotron U-400M with Two”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT007, pp. 335-337.
- M. Jonker et al., “The CLIC Machine Protection”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB071, pp. 2860-2862.
- J. Friedrich et al., “Performance of the GSI HLI-RFQ”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 551-554.
- N. Banerjee et al., “Electron Cooling With Space-Charge Dominated Proton Beams at IOTA”, in Proc. 13th Workshop on Beam Cooling and Related Topics (COOL'21), Novosibirsk, Russia, Nov. 2021, paper S201, pp. 14-19.
- C. Kerns, J. Crisp, Q. Kerns, and H. Miller, “New Low-Level RF System for the Fermilab Booster Synchrotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 619-622.
- C. Steier, A. Biocca, E. Domning, S. Jacobson, G. Portmann, and Y. Wu, “Design of a Fast Global Orbit Feedback System for the Advanced Light Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH009, pp. 1252-1254.
- T. Uesugi, S. Machida, and Y. Mori, “Short Bunch Extraction Near Transition Energy”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D029, pp. 459-461.
- V. Chouhan et al., “Recent Development in Vertical Electropolishing”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THBA02, pp. 1024-1030.
Back to search