JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	G. Jackson and G. W. Foster, “Storage Ring for Enhanced Antiproton Production at Fermilab”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP16, pp. 473-475. 
[n]	V. P. Dmitrievsky, A. A. Glazov, L. M. Onischenko, S. B. Vorozhtsov, and N. L. Zaplatin, “FFAG Synchrocyclotron as a Booster for Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 572-574. 
[n]	P. Snopok and E. Overton, “The Status of the Construction of MICE Step IV”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1364-1366. doi:10.18429/JACoW-IPAC2014-TUPME011
[n]	K. Yokoya, “ILC”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper FROBAU07, pp. 941-941. 
[n]	D. X. Wang, D. Kehne, M. Reiser, and J. G. Wang, “Longitudinal Drift Expansion and Compression of Electron Bunches in a Periodic Solenoid Focusing Transport Channel”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-62, pp. 489-491. 
[n]	Y. Hosaka et al., “Pulse Radiolysis with Supercontinuum Probe Generated by PCF”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA035, pp. 145-147. 
[n]	J. A. Nolen et al., “Design and Status of the Super Separator Spectrometer for the GANIL SPIRAL2 Project”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOB03, pp. 23-23. 
[n]	P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075. 
[n]	A. F. D. Morgan and G. Rehm, “Initial Work on the Design of a Longitudinal Bunch-by-Bunch Feedback Kicker at Diamond”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 197-201. doi:10.18429/JACoW-IBIC2015-MOPB064
[n]	J. D. Hepburn, B. G. Chidley, and J. H. Ormrod, “Design of an Intense Fast Neutron Source”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1809-1813. 
[n]	H. S. Lin, Y. Q. Cai, S. P. Jiang, Z. B. Sun, and Z. R. Zhou, “Radiation Monitoring System of HLSII”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 5011-5013. doi:10.18429/JACoW-IPAC2018-THPML140
[n]	Y. Kamiya, H. Nakamura, Y. Fujita, and T. Katsura, “Horizontal Movement of the Storage Ring Floor at the Photon Factory”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2260-2263. 
[n]	S. P. Zhang et al., “The Design and Commission of Vacuum System for CYCIAE-230 Superconducting Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO007, pp. 66-69. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO007
[n]	D. Huang, Q. Gu, and K. Y. Ng, “Study of Plasma Effect in Longitudinal Space Charge Induced Microbunching Instability”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB021, pp. 522-524. 
[n]	C. Goffing et al., “Turn-by-turn measurements of the energy spread at negative momentum compaction factor at KARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2677-2680. doi:10.18429/JACoW-IPAC2023-WEPA017
[n]	T. Tajima et al., “Results of Two LANL Beta = 0.175, 350-MHz, 2-Gap Spoke Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB063, pp. 1341-1343. 
[n]	G. Ferioli, J. J. Gras, H. Hiller, and R. Jung Geneva, “Beam profile measurements at 40 MHz in the PS to SPS transfer channel”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS15, pp. XX-XX. 
[n]	M. Akemoto and S. Takeda, “Pulse Modulator for 85 MW Klystron in ATF Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-22, pp. 415-417. 
[n]	J. N. Weaver et al., “Design Analysis and Measurement of Very Fast Kicker Magnets at SLAC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 411-414. 
[n]	A. L. Benwell et al., “Design of the Second-Generation ILC Marx Modulator”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP064, pp. 899-901. 
[n]	G. H. Mackenzie, R. Lee, and W. R. Rawnsley, “A Demonstration of Beam Intensity Modulation Without Loss of Charge”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-08, pp. 466-469. 
[n]	K. Ohmi, “Beam-beam Interaction under External Force Oscillation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS057, pp. 736-738. 
[n]	M. May, H. Edwards, M. Harrison, R. Isiminger, and J. Jagger, “Mechanical Design of Lambertson Magnets for Injection into the Energy Saver”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2842-2844. 
[n]	S. P. Yun et al., “Initial Operation of the Low-Flux Proton Beamline at the KOMAC 100 MeV Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 585-588. doi:10.18429/JACoW-IPAC2017-MOPIK038
[n]	F. Wang, N. V. Mokhov, A. I. Drozhdin, B. Parker, R. Soundranayagam, and R. Schailey, “Consequences of Kicker Failure During HEB to Collider Injection and Possible Mitigation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1360-1363. 
[n]	J. Allinger, G. Danby, B. DeVito, S. Hsieh, J. Jackson, and A. Prodell, “Studies of Performance and Field Reproducibility of a Precision 40 KG Superconducting Dipole Magnet”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 678-683. 
[n]	M. J. Chin, W. Barry, F. Sannibale, and J. M. Weber, “Advanced Light Source FGPA-based Bunch Cleaning”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF074, pp. 287-289. 
[n]	E. Weihreter et al., “Status of the Superconducting Compact Storage Ring Cosy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 237-240. 
[n]	Y. Yonemura et al., “Development of FFA at Center for Accelerator and Beam Applied Science of Kyushu University”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS052, unpublished. 
[n]	G. W. Bennett and C. M. Turner, “A Penning Discharge Ion Source for High Brightness”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 65-70. 
[n]	F. Eoz?®nou, C. Z. Antoine, S. Berry, J.-P. Charrier, Y. Gasser, and D. Reschke, “Low-Voltage Electro-Polishing of SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO070, pp. 781-785. 
[n]	H. Hayano, “STF Status and Plans”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOODAU02, pp. 66-66. 
[n]	N. Smolyakov, A. Hiraya, and H. Yoshida, “Edge Radiation and Electron Beam Diagnostics”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D014, pp. 701-703. 
[n]	T. Petersen et al., “Niobium-tin as a transformative technology for low-beta linacs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2709-2712. doi:10.18429/JACoW-IPAC2024-WEPS09
[n]	J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1107-1110. 
[n]	K. H. Hu, J. Chen, K. T. Hsu, S. Y. Hsu, C. H. Kuo, and D. Lee, “Status of the Superconducting Insertion Devices Control System at TLS”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA090, pp. 455-457. 
[n]	Y. C. Yang, C. K. Chan, C.-C. Chang, J.-Y. Chuang, and Y. Z. Lin, “Status of the TPS Vacuum Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1491. doi:10.18429/JACoW-ICALEPCS2019-WEPHA168
[n]	P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA001, pp. XX-XX. 
[n]	N. Nakamura, R. Hajima, Y. Kobayashi, T. Miyajima, S. Sakanaka, and M. Shimada, “Tolerance Study on RF Amplitude and Phase of Main Superconducting Cavities and Injection Timing for the Compact ERL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE084, pp. 2317-2319. 
[n]	J. Y. Huang, C. Kim, I. S. Ko, and W. Namkung, “Measurements for 2.4 GeV Beam by Diagnostic Beamline in PLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A08, pp. 1753-1755. 
[n]	T. Katayama, T. Kawaguchi, M. Okamura, and T. Tominaka, “Three Dimensional Field Analysis of Helical Snake Magnets for RHIC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP029G, pp. 2261-2263. 
[n]	H. Zha, A. Grudiev, D. Gudkov, and I. Syratchev, “Design of a Variable X-band RF Power Splitter”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3167-3169. doi:10.18429/JACoW-IPAC2015-WEPHA025
[n]	E. Plouviez and F. Uberto, “The Orbit Correction Scheme of the New EBS of the ESRF”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 51-54. doi:10.18429/JACoW-IBIC2016-MOPG09
[n]	V. A. Lebedev and A. V. Burov, “Coupling and its Effects on Beam Dynamics”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA14, pp. 85-88. 
[n]	D. S?ínchez-Valdepe, M. Carroll, A. Nordt, and M. Zaera-Sanz, “Implementation of the PLC based Machine Protection System for Magnets at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 555. doi:10.18429/JACoW-ICALEPCS2019-MOPHA139
[n]	Yu. A. Rogovsky, E. Perevedentsev, D. B. Shwartz, M. V. Timoshenko, and Yu. M. Zharinov, “Current Dependence of Bunch Dimensions in VEPP-2000 Collider”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 125-127. doi:10.18429/JACoW-RUPAC2018-THCEMH04
[n]	L. Yang and X. Y. Lu, “A Possible Concept to Improve the Efficiency of the Very Low Beta SC Accelerating Structure”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC042, pp. 2980-2982. 
[n]	T. Takayanagi, Y. Irie, J. Kamiya, T. Kawakubo, and I. Sakai, “Design of the Pulse Bending Magnets for the Injection System of the 3-GeV RCS in J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT007, pp. 1048-1050. 
[n]	M. Fan, “Development of test bench for 324 MHz superconducting cavity power couplers”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB074, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search