Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. W. Goodwin and M. F. Shea, “Invited Paper: Modern Control Techniques for Accelerators”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper M02, pp. 547-554.
[n] A. Kadish, M. E. Jones, and W. Peter, “A Generalization of the Child-Langmuir Relation for One-Dimensional Time-Dependent Diodes”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2576-2579.
[n] Y.-S. Cheng et al., “Status of Control System for the TPS Commissioning”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO033, pp. 114-116.
[n] A. Garonna et al., “Status of Proton Beam Commissioning of the MedAustron Particle Therapy Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3176-3179. doi:10.18429/JACoW-IPAC2016-THOAB01
[n] J. H. Wei, N. Baboi, and L. Shi, “Stability Study of Beam Position Measurement Based on Higher Order Mode Signals at FLASH”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 273-277. doi:10.18429/JACoW-IBIC2018-TUPB07
[n] A. Zelenak, “New Program FEFI for Easer Construction and Definition of Boundaries for IGUN”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI020, pp. 1750-1752.
[n] M. Yu. Balabanov, “About Development System for the Analysis of Charged Particle Beam Dynamics”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 380-382. doi:10.18429/JACoW-RUPAC2016-WEPSB011
[n] J. I. Nicoloso, J. J. Dupas, J. C. Picon, and F. P. Signol, “Configuration and Sequencing Tools for the LMJ Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP001, pp. 409-410.
[n] J. Chambrillon et al., “Assembly of the IFMIF SRF Linac cryomodule”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1570-1573. doi:10.18429/JACoW-IPAC2025-TUPS062
[n] J. J. Bicek, P. J. Billquist, and J. L. Yntema, “Telemetry Component Tests in the FN Tandem Terminal”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1182-1184.
[n] F. Osmic, A. Koschik, P. Ursch??tz, and M. Benedikt, “Status of MedAustron ÔÇô The Austrian Ion Therapy and Research Centre”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2146-2148. doi:10.18429/JACoW-IPAC2014-WEPRO081
[n] I. A. Ivanenko, B. Gikal, and G. Gulbekyan, “U400 Cyclotron Spiral Inflector with Beam Vertical Focusing Effect”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE012, pp. 4536-4538.
[n] P.-J. Wen, Y.-C. Lin, S.-Y. Lin, and M.-H. Chang, “Measurement of ozone concentration at the BL-02A beamline hutch in the Taiwan photon source for ensuring personnel safety”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3758-3760. doi:10.18429/JACoW-IPAC2024-THPS14
[n] W. Waldron, S. Eylon, W. Greenway, E. Henestroza, and S. S. Yu, “Electrical Breakdown Studies with Mycalex Insulators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE040, pp. 1171-1173.
[n] D. A. Dimitrov et al., “Modeling of Diamond Based Devices for Beam Diagnostics”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP162, pp. 1794-1796.
[n] J. Kamiya et al., “Evaluation of 2-D Transverse Beam Profile Monitor Using Gas Sheet at J-PARC LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2539-2542. doi:10.18429/JACoW-IPAC2019-WEPGW032
[n] X. Gu et al., “RHIC Electron Lenses Upgrades”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3830-3832. doi:10.18429/JACoW-IPAC2015-THPF059
[n] M. Leporis, “DESIGN AND CONSTRUCTION OF THE NEW ION SOURCE DECRISÔÇô4”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P19, pp. XX-XX.
[n] W. Vodel et al., “20 Years of Development of SQUID-based Cryogenic Current Comparator for Beam Diagnostics”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME013, pp. 497-499.
[n] E. Merle et al., “Transport of the 1.92 - 3.1 kA AIRIX Electron Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH105, pp. 3481-3483.
[n] R. Geithner et al., “An Improved Cryogenic Current Comparator for FAIR”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR020, pp. 822-824.
[n] D. Wang, J. Gao, P. Bambade, and T. Naito, “Analytical Estimation of ATF Beam Halo Distribution”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3888-3890. doi:10.18429/JACoW-IPAC2016-THPOR045
[n] S. Okada, “Design Studies for the Positron Factory”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP78, pp. 249-251.
For LaTeX
Use Complete Form
For BibTeX
References
- R. W. Goodwin and M. F. Shea, “Invited Paper: Modern Control Techniques for Accelerators”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper M02, pp. 547-554.
- A. Kadish, M. E. Jones, and W. Peter, “A Generalization of the Child-Langmuir Relation for One-Dimensional Time-Dependent Diodes”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2576-2579.
- Y.-S. Cheng et al., “Status of Control System for the TPS Commissioning”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO033, pp. 114-116.
- A. Garonna et al., “Status of Proton Beam Commissioning of the MedAustron Particle Therapy Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3176-3179.
- J. H. Wei, N. Baboi, and L. Shi, “Stability Study of Beam Position Measurement Based on Higher Order Mode Signals at FLASH”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 273-277.
- A. Zelenak, “New Program FEFI for Easer Construction and Definition of Boundaries for IGUN”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI020, pp. 1750-1752.
- M. Yu. Balabanov, “About Development System for the Analysis of Charged Particle Beam Dynamics”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 380-382.
- J. I. Nicoloso, J. J. Dupas, J. C. Picon, and F. P. Signol, “Configuration and Sequencing Tools for the LMJ Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP001, pp. 409-410.
- J. Chambrillon et al., “Assembly of the IFMIF SRF Linac cryomodule”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS062, pp. 1570-1573.
- J. J. Bicek, P. J. Billquist, and J. L. Yntema, “Telemetry Component Tests in the FN Tandem Terminal”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1182-1184.
- F. Osmic, A. Koschik, P. Ursch??tz, and M. Benedikt, “Status of MedAustron ÔÇô The Austrian Ion Therapy and Research Centre”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2146-2148.
- I. A. Ivanenko, B. Gikal, and G. Gulbekyan, “U400 Cyclotron Spiral Inflector with Beam Vertical Focusing Effect”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE012, pp. 4536-4538.
- P.-J. Wen, Y.-C. Lin, S.-Y. Lin, and M.-H. Chang, “Measurement of ozone concentration at the BL-02A beamline hutch in the Taiwan photon source for ensuring personnel safety”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS14, pp. 3758-3760.
- W. Waldron, S. Eylon, W. Greenway, E. Henestroza, and S. S. Yu, “Electrical Breakdown Studies with Mycalex Insulators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE040, pp. 1171-1173.
- D. A. Dimitrov et al., “Modeling of Diamond Based Devices for Beam Diagnostics”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP162, pp. 1794-1796.
- J. Kamiya et al., “Evaluation of 2-D Transverse Beam Profile Monitor Using Gas Sheet at J-PARC LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2539-2542.
- X. Gu et al., “RHIC Electron Lenses Upgrades”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3830-3832.
- M. Leporis, “DESIGN AND CONSTRUCTION OF THE NEW ION SOURCE DECRISÔÇô4”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P19, pp. XX-XX.
- W. Vodel et al., “20 Years of Development of SQUID-based Cryogenic Current Comparator for Beam Diagnostics”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME013, pp. 497-499.
- E. Merle et al., “Transport of the 1.92 - 3.1 kA AIRIX Electron Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH105, pp. 3481-3483.
- R. Geithner et al., “An Improved Cryogenic Current Comparator for FAIR”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR020, pp. 822-824.
- D. Wang, J. Gao, P. Bambade, and T. Naito, “Analytical Estimation of ATF Beam Halo Distribution”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3888-3890.
- S. Okada, “Design Studies for the Positron Factory”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP78, pp. 249-251.
Back to search