Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. M. Dykes and D.S.G. Higgins, “Possible Cavity Construction Techniques for the DIAMOND Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ18, pp. 1762-1764.
[n] A. C. de Lira and P. Bellomo, “SPEAR3 INTERMEDIATE DC MAGNET POWER SUPPLIES”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF083, pp. 1798-1800.
[n] D. Filippetto et al., “Status of Thomson Source at SPARC/PLASMONX”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP074, pp. 1257-1259.
[n] K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Design and Measurement of Double Gap Buncher Cavity Proposed for Reduction of X- ray Radiation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA23, pp. 1031-1033.
[n] C. Pellegrini, “Overview of Single Pass Free Electron Lasers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper FRYBPA01, pp. 3636-3640.
[n] B. Salvant et al., “Beam Induced RF Heating in LHC in 2015”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 602-605. doi:10.18429/JACoW-IPAC2016-MOPOR008
[n] R. M. Jones, T. Higo, Y. Higashi, J. W. Wang, R. H. Miller, and N. M. Kroll, “Local and Fundamental Mode Coupler Damping of the Transverse Wakefield in RDDS1 Linacs”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA09, pp. 395-397.
[n] L. N. S. Thompson et al., “Synchrotron Radiation Studies for a Ring-Ring LHeC Interaction Region and Long Straight Section”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC039, pp. 1248-1250.
[n] T. Fujita et al., “Long-Term Stability of the Beam Position Monitors at SPring-8”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 359-363. doi:10.18429/JACoW-IBIC2015-TUPB020
[n] K. Nakao et al., “Analysis on Variation Factors of Optical Power at the LEBRA FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC75, pp. 675-677.
[n] M. Zhang, R. B. Deng, D. Gu, Q. Gu, D. Huang, and Z. Wang, “Beam Stability Modeling and Jitter Control for SXFEL Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1513-1516. doi:10.18429/JACoW-IPAC2017-TUPAB084
[n] F. Demurtas et al., “Experimental characterization of the timing-jitter effects on a beam-driven plasma wakefield accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 553-556. doi:10.18429/JACoW-IPAC2024-MOPR43
[n] P. Schoessow et al., “Analysis of High Repetition Rate Effects in Dielectric Wakefield Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC12, pp. 93-95.
[n] M. Tigner, “Is There a Future for High Energy Accelerators?”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3931-3934.
[n] D. P. Gurd, “Accelerator Control and Global Networks - State of the Art”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper FR201, pp. 847-851.
[n] P. Krejcik et al., “Commissioning the New LCLS X-band Transverse Deflecting Cavity with Femtosecond Resolution”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUAL2, pp. 308-311.
[n] R. R?ícz, S. Biri, and J. Palinkas, “An ECR Table Plasma Generator”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT005, pp. 124-126.
[n] K. Endo, T. Igarashi, T. Kasuga, M. Kihara, and E. Takasaki, “Modification of LINDA to Treat the Grain Orientation Effect”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 716-719.
[n] J. Corlett, L. Doolittle, R. Schoenlein, J. Staples, R. Wilcox, and A. Zholents, “Techniques for Synchronization of X-Ray Pulses to the Pump Laser in an Ultrafast X-Ray Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB001, pp. 2408-2410.
[n] I. Hwang, E.-S. Kim, J. Hong, Y. Morozumi, and K. Saito, “Multipacting Study of ICHIRO End Cavity”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP15, pp. XX-XX.
[n] M. S. Zisman, “Neutrino Factories and Beta Beams”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper FRXAPA01, pp. 3616-3620.
[n] D. T. Abell et al., “Simulation of H- Beam Chopping in a Solenoid-Based Low-Energy Beam Transport (LEBT)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP254, pp. 1957-1959.
[n] J. Bridges, Y. W. Kang, R. L. Kustom, and K. Primdahl, “High Power Testing of the Prototype Accelerating Cavity (352 MHz) for the Advanced Photon Source (APS)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1254-1257.
[n] G. Stupakov and P. Emma, “Reversible Electron Beam Heater without Transverse Deflecting Cavities”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 166-170. doi:10.18429/JACoW-FEL2015-MOP056
[n] X. Wu et al., “MSU Re-accelerator - the re-acceleration of low energy RIBS at the NSCL”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper MO304, pp. XX-XX.
[n] M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3827-3829. doi:10.18429/JACoW-IPAC2024-THPS41
[n] J. Tuozzolo, J. Brodowski, G. Danby, J. Jackson, and W. Meng, “Magnets for the National Spallation Neutron Source Accumulator Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P003, pp. 3233-3235.
[n] M.-E. Angoletta, “Digital Low Level RF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEXPA03, pp. 1847-1851.
[n] M. Frichembruder, R. Pakter, and F. B. Rizzato, “Modeling Coherence Decay in Broad Band Triplet Interaction”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH001, pp. 0-3645.
[n] D. Brandt et al., “Orbit Processign for LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1444-1447.
[n] C. Vaccarezza et al., “Slice Emittance Measurements at SPARC Photoinjector with a RF Deflector”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC105, pp. 1305-1307.
[n] P. K. Saha et al., “Systematic Beam Loss Study due to the Foil Scattering at the 3-GeV RCS of J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB018, pp. 3921-3923.
[n] A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 358-360. doi:10.18429/JACoW-NAPAC2016-TUPOA36
[n] M. Tigner, “CESR-B, upgrading the CESR Facility to B-Factory Capability”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 132-135.
[n] V. Kapin, “Study of the Four-rod RFQ Using the Normal Mode Theory of Transmission Lines”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2191-2194.
[n] J. Qiang, J. N. Corlett, P. Emma, C. E. Mitchell, and M. Venturini, “Simulation and Analysis of Microbunching Instability in a High Repetition rate FEL Beam Delivery System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME062, pp. 1709-1711.
[n] E. N. Jongewaard et al., “RF Gun Photocathode Research at SLAC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP046, pp. 664-666.
[n] S.-Y. Chen, E. Dodd, J. K. Kim, A. Maksimchuk, and R. Wagner, “Laser-Driven Plasma-Cathode Electron Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C002, pp. 2657-2661.
[n] F.-J. Decker, S. D. Anderson, D. Kharakh, and M. K. Sullivan, “Permanent Magnet Skew Quadrupoles for the Low Emittance LER Lattice of PEP-II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC007, pp. 2987-2989.
[n] J. M. Weber, C. A. Lionberger, W. E. Norum, G. J. Portmann, C. Serrano, and E. C. Williams, “ALS Timing System Upgrade”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD18, pp. 187-190.
[n] A. Zelenski et al., “The RHIC Polarized Source Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOOBA2, pp. 49-51.
[n] H. Ishimaru, G. Horikoshi, and Y. Kimura, “New All Aluminum Alloy Vacuum System for the TRISTAN ee- Storage Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3320-3323.
[n] H. Koiso, H. Nakayama, K. Oide, and M. Tawada, “Dynamic Aperture with Multipoles of Special Quadrupole Magnets in the KEKB Interaction Region”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V015, pp. 1394-1396.
[n] S. Cao et al., “Ultra-high spatial resolution in micron scale achieved by a practical cascade high energy electron radiography in HERPL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1095-1097. doi:10.18429/JACoW-IPAC2025-TUPB057
[n] M. Ikegami et al., “Recent Progress in Beam Commissioning of J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO030, pp. 3827-3829.
[n] Y. C. Chae et al., “A 2-GeV, 1-MW Pulsed Proton Source for a Spallation Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP002G, pp. 521-523.
[n] M. Merio et al., “Update of SSR2 Cavities Design for Project X and RISP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO057, pp. 2435-2437.
[n] G. Ciovati et al., “Superconducting Prototype Cavities for the Spallation Neutron Source (SNS) Project”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT016, pp. XX-XX.
[n] T. Honma et al., “Improvements and Applications at NIRS Cyclotron Facility”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-07, pp. XX-XX.
[n] K. B. Unser, “Design and Preliminary Tests of a Beam Intensity Monitor for LEP”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 71-74.
[n] J. A. Clarke et al., “Construction of a Full Scale Superconducting Undulator Module for the International Linear Collider Positron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP070, pp. 709-711.
[n] A. Novokhatski, M. Timm, and T. Weiland, “High Frequency Properties of Wake Fields in TESLA Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP29G, pp. 1315-1317.
[n] E. A. Nanni et al., “Design of a Field-Emission X-Band Gun Driven by Solid-State RF Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4399-4402. doi:10.18429/JACoW-IPAC2017-THPIK126
[n] K. Hwang and J. Qiang, “A Recirculating Proton Linac Design”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 752-754. doi:10.18429/JACoW-NAPAC2016-WEPOA28
[n] T. J. Davis, E. Chojnacki, and J. A. Nation, “A High Power X-Band Relativistic Klystron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 147-150.
[n] J. Y. Ma, Z. Gao, G. Huang, and L. P. Sun, “Low-level RF System for The Chinese ADS Front-end Demo Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2159-2161. doi:10.18429/JACoW-IPAC2018-WEPAL008
[n] L. T. Campbell, B. W. J. McNeil, F. J. Gruener, and A. R. Maier, “Unaveraged Modelling of a LWFA Driven FEL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO08, pp. 43-46.
[n] A. A. Zholents, P. Emma, W. M. Fawley, Z. Huang, S. Reiche, and G. Stupakov, “Current-Enhanced SASE Using an Optical Laser and its Application to the LCLS”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper WEBOS01, pp. XX-XX.
[n] M. Vogt et al., “FLASH status – FEL user facility between two upgrade shutdowns”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 335-338. doi:10.18429/JACoW-IPAC2024-MOPG16
[n] T. J. Campese et al., “Multi-Diagnostic Transverse Profile Monitor Chamber for Extreme Ultraviolet Lithography”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 554-556. doi:10.18429/JACoW-IBIC2015-TUPB085
[n] G. Gatti et al., “Metal Film Photocathodes for High Brightness Electron Injectors”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH027, pp. 104-106.
[n] M. K. Kalliokoski et al., “CASCADE: a Cavity Based Dark Matter Experiment”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP001, pp. 66-68.
[n] N. M. Gelfand, “Computation of the TEVATRON Luminosity Using Measured Machine Parameters”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 102-105.
[n] R. A. Baartman, “Optimal 3D Quadrupoles Shapes”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEZBB1, pp. 773-777.
[n] F. Y. Li, B. E. Carlsten, R. Garimella, C.-K. Huang, and T. J. Kwan, “Comparison of Numerical Methods for the Calculation of Synchrotron Radiation From Electrons”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEXBA4, unpublished.
[n] Q. Qin, L. Ma, J. Q. Wang, and C. Zhang, “Status and Performance of BEPCII”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEXMH01, pp. 2359-2363.
[n] K. Hwang et al., “Beam Tuning at the FRIB Front End Using Machine Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 983-986. doi:10.18429/JACoW-IPAC2022-TUPOST053
[n] A. Giribono et al., “Electron beam analysis and sensitivity studies for the EuPRAXIA@SPARC_LAB RF injector”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2034-2037. doi:10.18429/JACoW-IPAC2023-TUPL130
[n] R. Xiang et al., “Improvement of the Photoemission Efficiency of Magnesium Photocathodes”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 500-502. doi:10.18429/JACoW-IPAC2017-MOPIK003
[n] T. Higo et al., “Fabrication of a Quadrant-type Accelerator Structure for CLIC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP084, pp. 2716-2718.
[n] N. Walker et al., “Flat Beams in the SLC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2019-2022.
[n] S. Isagawa et al., “Coating Techniques and Improvement of High Power CW Klystrons for TRISTAN”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1912-1915.
[n] T. Summers, D. Chabot, L. O. Dallin, and M. J. Sigrist, “Orbit Improvements at the Canadian Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP018, pp. 1129-1131.
[n] S. Auch et al., “New Developments for the RFQ-Accelerator of the Heidelberg High Current Injector”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP108G, pp. 804-806.
[n] A. Bocci et al., “Fast IR Array Detector for Transverse Beam Diagnostics at DANE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD098, pp. 936-938.
[n] Y. M. Nosochkov, Y. Cai, F. Lin, V. S. Morozov, G. H. Wei, and Y. Zhang, “JLEIC Electron Ring Dynamic Aperture with Non-linear Field Errors”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 404-407. doi:10.18429/JACoW-IPAC2018-MOPML008
[n] C. A. Cooper et al., “Recent Developments in Electropolishing and Tumbling R&D at Fermilab”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO076, pp. 806-810.
[n] K. Saito, Y. Higashi, T. Higo, Y. Morozumi, and H. Yamaoka, “Mechanical Structure Analysis for ICHIRO 9-Cell Cavity”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP21, pp. 283-283.
[n] J. G. Ding, S. M. Hu, G. Y. Jiang, H. F. Miao, H. Zhao, and H. J. Zhu, “The Control System of the SDUV-FEL Test Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA024, pp. 3195-3197.
[n] F. Palmer, “Surface Resistance of Superconductors - Examples from Nb-O Systems”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87C06, pp. XX-XX.
[n] G. A. Moortgat-Pick et al., “Depolarization and Beam-beam Effects at the Linear Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP024, pp. 598-600.
[n] B. J. Holzer, K. D. J. Andr?®, S. A. Bogacz, O. S. Br??ning, and M. Klein, “Accelerator Challenges of the LHeC Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2570-2573. doi:10.18429/JACoW-IPAC2021-WEPAB001
[n] O. A. Gusev, V. M. Nikolaev, I. A. Prudnikov, V. I. Shakhov, and Yu. P. Vakhrushin, “The Unified Series Linear Electron Accelerators Development Results”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1845-1847.
[n] W. T. Weng, L. Ahrens, R. Damm, and A. J. McNerney, “Construction and Early Commissioning Results of the AGS Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 52-57.
[n] Y. S. Cho, K. H. Chung, and T. Y. Kim, “Construction and Performance Test of a 100 MeV Race Track Microtron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP096G, pp. 587-589.
[n] S. Herb and J. Kirchgessner, “Operation of CESR with Permanent Magnet Interactioin Region Quadrupoles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 130-133.
[n] R. Bartolini, M. Borland, and K. C. Harkay, “Plans for the Generation of Short Radiation Pulses at the Diamond Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH054, pp. 160-162.
[n] C. Thiebaux et al., “First Results of PEPITES, A New Transparent Profiler Based on Secondary Electrons Emission for Charged Particle Beams”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 80-83. doi:10.18429/JACoW-IBIC2022-MOP21
[n] M. Gullans, G. Penn, J. S. Wurtele, and A. Zholents, “A Source of Coherent Soft X-ray Radiation Based on High-order Harmonic Generation and Free Electron Lasers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH045, pp. 142-144.
[n] M. Pisharody et al., “High Power Window Tests on a 500 MHz Planar Window for the CESR Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ02, pp. 1720-1722.
[n] A. Puntambekar et al., “Development of 1.3 GHz Prototype Niobium Single Cell Superconducting Cavity Under IIFC Collaboration”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP032, pp. 871-873.
[n] K. Saito and F. Furuta, “Sulfur Generation Mechanism During Electropolishing with Niobium Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO090, pp. 838-838.
[n] C. Zhang et al., “Structural Analysis of the New-Shaped QWR for HIAF in IMP”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB057, pp. 606-608.
[n] F. J. Willeke, “Commissioning of NSLS-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 11-16. doi:10.18429/JACoW-IPAC2015-MOYGB3
[n] P.-E. Bernaudin, P. Bosland, R. Ferdinand, Y. Gomez-Martinez, and G. Olry, “Status of the SPIRAL 2 Superconducting LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD025, pp. 732-734.
[n] L. P. Sun, X. Du, Y. He, A. Shi, C. Zhang, and Z. L. Zhang, “Design of Re-Buncher Cavity for Heavy-ion LINAC in IMP”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB036, pp. 558-560.
[n] D. Z. Cao et al., “Electromagnetic and Mechanical Design of High Gradient S-band Accelerating Structure in TTX”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 83-85. doi:10.18429/JACoW-SAP2017-MOPH24
[n] V. Kapin, “Multiple-Beam RFQ Structure with a Matrix-Array of Beamlets”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP30, pp. 722-724.
[n] F. Toufexis, T. Tang, and S. G. Tantawi, “A 200 ?Ám-period Laser-driven Undulator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP047, pp. 131-136.
[n] N. Terunuma, H. Nakayama, and J. Urakawa, “Study on the Metallic Coating of the Ceramic Chamber for the ATF Damping Ring Kicker Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR03, pp. 1906-1908.
[n] J. M. Byrd et al., “Instrumentation and Diagnostics for High Repetition Rate Linac-driven FELs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOOAA02, pp. 23-25.
[n] Y. Yamazaki, “Approach to a very high intensity beam at J-PARC”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOAP01, pp. XX-XX.
[n] N. Araki et al., “Beam Deceleration in the Operation of the Beam Extraction with a Patient Respiration”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP110G, pp. 2653-2655.
[n] P. Sha et al., “Pre-study of CEPC SRF Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 476-479. doi:10.18429/JACoW-LINAC2018-TUPO064
[n] H. Ikeda and H. Sako, “Development of a High-Level Application Framework with a Script Language JCE for Accelerator Beam Commissioning”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP091, pp. 850-852.
[n] S. Ohsawa et al., “Improvements to the Injection System of the KEK 2.5-GeV Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-19, pp. 91-93.
[n] M. Tawada et al., “Progress of Design Study of Interaction Region Quadrupoles for the SuperKEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB034, pp. 346-348.
[n] G. Lambert et al., “Seeding the FEL of the SCSS Phase 1 Facility with the 13th Laser Harmonic of a Ti: Sa Laser (61.5 nm) Produced in Xe Gas”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOOC004, pp. XX-XX.
[n] S. Di Mitri, M. Cornacchia, S. V. Milton, and S. Spampinati, “Alternative Scheme of Bunch Length Compression in Linacs for Free Electron Lasers”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP033, pp. 1610-1612.
[n] S. X. Peng et al., “A Non-Intercepting Beam Emittance Measurement Device Based on Neutral Beam Fluorescence Method at PKU”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF10, pp. 522-524.
[n] N. Iida et al., “Pulse-to-Pulse Switching Injection to Three Rings of Different Energies from a Single Electron Linac at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP110, pp. 2769-2771.
[n] R. R?ícz et al., “Structural Information on the ECR Plasma by X-ray Imaging”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 30-34. doi:10.18429/JACoW-ECRIS2016-MODO01
[n] F. M?®ot, H. Huang, W. W. MacKay, and T. Roser, “Spin Dynamics Simulations At AGS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD001, pp. 666-668.
[n] D. Boutin, A. Chance, B. Dalena, B. J. Holzer, and D. Schulte, “Updates on the Optic Corrections of FCC-hh”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 133-136. doi:10.18429/JACoW-IPAC2018-MOPMF023
[n] V. D. Shiltsev and P. Piot, “ASTA at Fermilab: Accelerator Physics and Accelerator Education Programs at the Modern Accelerator R&D Users Facility for HEP and Accelerator Applications”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC15, pp. 96-98.
[n] Y. Yamazaki and M. Kinsho, “Discussion on RCS versus AR on the Basis of J-PARC Beam Commissioning for Pulsed Spallation Neutron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP084, pp. 3557-3559.
[n] T. Maruta et al., “Power ramp up and minimization of beam losses at the facility for Rare Isotope Beams”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR03, unpublished.
[n] D. A. Dimitrov et al., “Modeling Localized States and Band Bending Effects on Electron Emission Ion from GaAs”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA21, pp. 225-227.
[n] Y. Iwashita et al., “Non-destructive Inspections for SC Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB053, pp. 294-296.
For LaTeX
Use Complete Form
For BibTeX
References
- D. M. Dykes and D.S.G. Higgins, “Possible Cavity Construction Techniques for the DIAMOND Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ18, pp. 1762-1764.
- A. C. de Lira and P. Bellomo, “SPEAR3 INTERMEDIATE DC MAGNET POWER SUPPLIES”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF083, pp. 1798-1800.
- D. Filippetto et al., “Status of Thomson Source at SPARC/PLASMONX”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP074, pp. 1257-1259.
- K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Design and Measurement of Double Gap Buncher Cavity Proposed for Reduction of X- ray Radiation”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA23, pp. 1031-1033.
- C. Pellegrini, “Overview of Single Pass Free Electron Lasers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper FRYBPA01, pp. 3636-3640.
- B. Salvant et al., “Beam Induced RF Heating in LHC in 2015”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 602-605.
- R. M. Jones, T. Higo, Y. Higashi, J. W. Wang, R. H. Miller, and N. M. Kroll, “Local and Fundamental Mode Coupler Damping of the Transverse Wakefield in RDDS1 Linacs”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA09, pp. 395-397.
- L. N. S. Thompson et al., “Synchrotron Radiation Studies for a Ring-Ring LHeC Interaction Region and Long Straight Section”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC039, pp. 1248-1250.
- T. Fujita et al., “Long-Term Stability of the Beam Position Monitors at SPring-8”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 359-363.
- K. Nakao et al., “Analysis on Variation Factors of Optical Power at the LEBRA FEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC75, pp. 675-677.
- M. Zhang, R. B. Deng, D. Gu, Q. Gu, D. Huang, and Z. Wang, “Beam Stability Modeling and Jitter Control for SXFEL Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1513-1516.
- F. Demurtas et al., “Experimental characterization of the timing-jitter effects on a beam-driven plasma wakefield accelerator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR43, pp. 553-556.
- P. Schoessow et al., “Analysis of High Repetition Rate Effects in Dielectric Wakefield Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC12, pp. 93-95.
- M. Tigner, “Is There a Future for High Energy Accelerators?”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3931-3934.
- D. P. Gurd, “Accelerator Control and Global Networks - State of the Art”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper FR201, pp. 847-851.
- P. Krejcik et al., “Commissioning the New LCLS X-band Transverse Deflecting Cavity with Femtosecond Resolution”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUAL2, pp. 308-311.
- R. R?ícz, S. Biri, and J. Palinkas, “An ECR Table Plasma Generator”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUPOT005, pp. 124-126.
- K. Endo, T. Igarashi, T. Kasuga, M. Kihara, and E. Takasaki, “Modification of LINDA to Treat the Grain Orientation Effect”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 716-719.
- J. Corlett, L. Doolittle, R. Schoenlein, J. Staples, R. Wilcox, and A. Zholents, “Techniques for Synchronization of X-Ray Pulses to the Pump Laser in an Ultrafast X-Ray Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB001, pp. 2408-2410.
- I. Hwang, E.-S. Kim, J. Hong, Y. Morozumi, and K. Saito, “Multipacting Study of ICHIRO End Cavity”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP15, pp. XX-XX.
- M. S. Zisman, “Neutrino Factories and Beta Beams”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper FRXAPA01, pp. 3616-3620.
- D. T. Abell et al., “Simulation of H- Beam Chopping in a Solenoid-Based Low-Energy Beam Transport (LEBT)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP254, pp. 1957-1959.
- J. Bridges, Y. W. Kang, R. L. Kustom, and K. Primdahl, “High Power Testing of the Prototype Accelerating Cavity (352 MHz) for the Advanced Photon Source (APS)”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1254-1257.
- G. Stupakov and P. Emma, “Reversible Electron Beam Heater without Transverse Deflecting Cavities”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 166-170.
- X. Wu et al., “MSU Re-accelerator - the re-acceleration of low energy RIBS at the NSCL”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper MO304, pp. XX-XX.
- M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS41, pp. 3827-3829.
- J. Tuozzolo, J. Brodowski, G. Danby, J. Jackson, and W. Meng, “Magnets for the National Spallation Neutron Source Accumulator Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P003, pp. 3233-3235.
- M.-E. Angoletta, “Digital Low Level RF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEXPA03, pp. 1847-1851.
- M. Frichembruder, R. Pakter, and F. B. Rizzato, “Modeling Coherence Decay in Broad Band Triplet Interaction”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH001, pp. 0-3645.
- D. Brandt et al., “Orbit Processign for LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1444-1447.
- C. Vaccarezza et al., “Slice Emittance Measurements at SPARC Photoinjector with a RF Deflector”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC105, pp. 1305-1307.
- P. K. Saha et al., “Systematic Beam Loss Study due to the Foil Scattering at the 3-GeV RCS of J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB018, pp. 3921-3923.
- A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 358-360.
- M. Tigner, “CESR-B, upgrading the CESR Facility to B-Factory Capability”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 132-135.
- V. Kapin, “Study of the Four-rod RFQ Using the Normal Mode Theory of Transmission Lines”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2191-2194.
- J. Qiang, J. N. Corlett, P. Emma, C. E. Mitchell, and M. Venturini, “Simulation and Analysis of Microbunching Instability in a High Repetition rate FEL Beam Delivery System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME062, pp. 1709-1711.
- E. N. Jongewaard et al., “RF Gun Photocathode Research at SLAC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP046, pp. 664-666.
- S.-Y. Chen, E. Dodd, J. K. Kim, A. Maksimchuk, and R. Wagner, “Laser-Driven Plasma-Cathode Electron Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2C002, pp. 2657-2661.
- F.-J. Decker, S. D. Anderson, D. Kharakh, and M. K. Sullivan, “Permanent Magnet Skew Quadrupoles for the Low Emittance LER Lattice of PEP-II”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC007, pp. 2987-2989.
- J. M. Weber, C. A. Lionberger, W. E. Norum, G. J. Portmann, C. Serrano, and E. C. Williams, “ALS Timing System Upgrade”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD18, pp. 187-190.
- A. Zelenski et al., “The RHIC Polarized Source Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOOBA2, pp. 49-51.
- H. Ishimaru, G. Horikoshi, and Y. Kimura, “New All Aluminum Alloy Vacuum System for the TRISTAN ee- Storage Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3320-3323.
- H. Koiso, H. Nakayama, K. Oide, and M. Tawada, “Dynamic Aperture with Multipoles of Special Quadrupole Magnets in the KEKB Interaction Region”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V015, pp. 1394-1396.
- S. Cao et al., “Ultra-high spatial resolution in micron scale achieved by a practical cascade high energy electron radiography in HERPL”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB057, pp. 1095-1097.
- M. Ikegami et al., “Recent Progress in Beam Commissioning of J-PARC Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO030, pp. 3827-3829.
- Y. C. Chae et al., “A 2-GeV, 1-MW Pulsed Proton Source for a Spallation Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP002G, pp. 521-523.
- M. Merio et al., “Update of SSR2 Cavities Design for Project X and RISP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO057, pp. 2435-2437.
- G. Ciovati et al., “Superconducting Prototype Cavities for the Spallation Neutron Source (SNS) Project”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT016, pp. XX-XX.
- T. Honma et al., “Improvements and Applications at NIRS Cyclotron Facility”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-07, pp. XX-XX.
- K. B. Unser, “Design and Preliminary Tests of a Beam Intensity Monitor for LEP”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 71-74.
- J. A. Clarke et al., “Construction of a Full Scale Superconducting Undulator Module for the International Linear Collider Positron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP070, pp. 709-711.
- A. Novokhatski, M. Timm, and T. Weiland, “High Frequency Properties of Wake Fields in TESLA Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP29G, pp. 1315-1317.
- E. A. Nanni et al., “Design of a Field-Emission X-Band Gun Driven by Solid-State RF Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4399-4402.
- K. Hwang and J. Qiang, “A Recirculating Proton Linac Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 752-754.
- T. J. Davis, E. Chojnacki, and J. A. Nation, “A High Power X-Band Relativistic Klystron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 147-150.
- J. Y. Ma, Z. Gao, G. Huang, and L. P. Sun, “Low-level RF System for The Chinese ADS Front-end Demo Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2159-2161.
- L. T. Campbell, B. W. J. McNeil, F. J. Gruener, and A. R. Maier, “Unaveraged Modelling of a LWFA Driven FEL”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO08, pp. 43-46.
- A. A. Zholents, P. Emma, W. M. Fawley, Z. Huang, S. Reiche, and G. Stupakov, “Current-Enhanced SASE Using an Optical Laser and its Application to the LCLS”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper WEBOS01, pp. XX-XX.
- M. Vogt et al., “FLASH status – FEL user facility between two upgrade shutdowns”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG16, pp. 335-338.
- T. J. Campese et al., “Multi-Diagnostic Transverse Profile Monitor Chamber for Extreme Ultraviolet Lithography”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 554-556.
- G. Gatti et al., “Metal Film Photocathodes for High Brightness Electron Injectors”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH027, pp. 104-106.
- M. K. Kalliokoski et al., “CASCADE: a Cavity Based Dark Matter Experiment”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP001, pp. 66-68.
- N. M. Gelfand, “Computation of the TEVATRON Luminosity Using Measured Machine Parameters”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 102-105.
- R. A. Baartman, “Optimal 3D Quadrupoles Shapes”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEZBB1, pp. 773-777.
- F. Y. Li, B. E. Carlsten, R. Garimella, C.-K. Huang, and T. J. Kwan, “Comparison of Numerical Methods for the Calculation of Synchrotron Radiation From Electrons”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper WEXBA4, unpublished.
- Q. Qin, L. Ma, J. Q. Wang, and C. Zhang, “Status and Performance of BEPCII”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEXMH01, pp. 2359-2363.
- K. Hwang et al., “Beam Tuning at the FRIB Front End Using Machine Learning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 983-986.
- A. Giribono et al., “Electron beam analysis and sensitivity studies for the EuPRAXIA@SPARC_LAB RF injector”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL130, pp. 2034-2037.
- R. Xiang et al., “Improvement of the Photoemission Efficiency of Magnesium Photocathodes”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 500-502.
- T. Higo et al., “Fabrication of a Quadrant-type Accelerator Structure for CLIC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP084, pp. 2716-2718.
- N. Walker et al., “Flat Beams in the SLC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2019-2022.
- S. Isagawa et al., “Coating Techniques and Improvement of High Power CW Klystrons for TRISTAN”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1912-1915.
- T. Summers, D. Chabot, L. O. Dallin, and M. J. Sigrist, “Orbit Improvements at the Canadian Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP018, pp. 1129-1131.
- S. Auch et al., “New Developments for the RFQ-Accelerator of the Heidelberg High Current Injector”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP108G, pp. 804-806.
- A. Bocci et al., “Fast IR Array Detector for Transverse Beam Diagnostics at DANE”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD098, pp. 936-938.
- Y. M. Nosochkov, Y. Cai, F. Lin, V. S. Morozov, G. H. Wei, and Y. Zhang, “JLEIC Electron Ring Dynamic Aperture with Non-linear Field Errors”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 404-407.
- C. A. Cooper et al., “Recent Developments in Electropolishing and Tumbling R&D at Fermilab”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO076, pp. 806-810.
- K. Saito, Y. Higashi, T. Higo, Y. Morozumi, and H. Yamaoka, “Mechanical Structure Analysis for ICHIRO 9-Cell Cavity”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP21, pp. 283-283.
- J. G. Ding, S. M. Hu, G. Y. Jiang, H. F. Miao, H. Zhao, and H. J. Zhu, “The Control System of the SDUV-FEL Test Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA024, pp. 3195-3197.
- F. Palmer, “Surface Resistance of Superconductors - Examples from Nb-O Systems”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87C06, pp. XX-XX.
- G. A. Moortgat-Pick et al., “Depolarization and Beam-beam Effects at the Linear Collider”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP024, pp. 598-600.
- B. J. Holzer, K. D. J. Andr?®, S. A. Bogacz, O. S. Br??ning, and M. Klein, “Accelerator Challenges of the LHeC Project”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2570-2573.
- O. A. Gusev, V. M. Nikolaev, I. A. Prudnikov, V. I. Shakhov, and Yu. P. Vakhrushin, “The Unified Series Linear Electron Accelerators Development Results”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1845-1847.
- W. T. Weng, L. Ahrens, R. Damm, and A. J. McNerney, “Construction and Early Commissioning Results of the AGS Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 52-57.
- Y. S. Cho, K. H. Chung, and T. Y. Kim, “Construction and Performance Test of a 100 MeV Race Track Microtron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP096G, pp. 587-589.
- S. Herb and J. Kirchgessner, “Operation of CESR with Permanent Magnet Interactioin Region Quadrupoles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 130-133.
- R. Bartolini, M. Borland, and K. C. Harkay, “Plans for the Generation of Short Radiation Pulses at the Diamond Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH054, pp. 160-162.
- C. Thiebaux et al., “First Results of PEPITES, A New Transparent Profiler Based on Secondary Electrons Emission for Charged Particle Beams”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 80-83.
- M. Gullans, G. Penn, J. S. Wurtele, and A. Zholents, “A Source of Coherent Soft X-ray Radiation Based on High-order Harmonic Generation and Free Electron Lasers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH045, pp. 142-144.
- M. Pisharody et al., “High Power Window Tests on a 500 MHz Planar Window for the CESR Upgrade”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ02, pp. 1720-1722.
- A. Puntambekar et al., “Development of 1.3 GHz Prototype Niobium Single Cell Superconducting Cavity Under IIFC Collaboration”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP032, pp. 871-873.
- K. Saito and F. Furuta, “Sulfur Generation Mechanism During Electropolishing with Niobium Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO090, pp. 838-838.
- C. Zhang et al., “Structural Analysis of the New-Shaped QWR for HIAF in IMP”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB057, pp. 606-608.
- F. J. Willeke, “Commissioning of NSLS-II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 11-16.
- P.-E. Bernaudin, P. Bosland, R. Ferdinand, Y. Gomez-Martinez, and G. Olry, “Status of the SPIRAL 2 Superconducting LINAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD025, pp. 732-734.
- L. P. Sun, X. Du, Y. He, A. Shi, C. Zhang, and Z. L. Zhang, “Design of Re-Buncher Cavity for Heavy-ion LINAC in IMP”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB036, pp. 558-560.
- D. Z. Cao et al., “Electromagnetic and Mechanical Design of High Gradient S-band Accelerating Structure in TTX”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 83-85.
- V. Kapin, “Multiple-Beam RFQ Structure with a Matrix-Array of Beamlets”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP30, pp. 722-724.
- F. Toufexis, T. Tang, and S. G. Tantawi, “A 200 ?Ám-period Laser-driven Undulator”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP047, pp. 131-136.
- N. Terunuma, H. Nakayama, and J. Urakawa, “Study on the Metallic Coating of the Ceramic Chamber for the ATF Damping Ring Kicker Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR03, pp. 1906-1908.
- J. M. Byrd et al., “Instrumentation and Diagnostics for High Repetition Rate Linac-driven FELs”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOOAA02, pp. 23-25.
- Y. Yamazaki, “Approach to a very high intensity beam at J-PARC”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper MOAP01, pp. XX-XX.
- N. Araki et al., “Beam Deceleration in the Operation of the Beam Extraction with a Patient Respiration”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP110G, pp. 2653-2655.
- P. Sha et al., “Pre-study of CEPC SRF Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 476-479.
- H. Ikeda and H. Sako, “Development of a High-Level Application Framework with a Script Language JCE for Accelerator Beam Commissioning”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP091, pp. 850-852.
- S. Ohsawa et al., “Improvements to the Injection System of the KEK 2.5-GeV Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-19, pp. 91-93.
- M. Tawada et al., “Progress of Design Study of Interaction Region Quadrupoles for the SuperKEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB034, pp. 346-348.
- G. Lambert et al., “Seeding the FEL of the SCSS Phase 1 Facility with the 13th Laser Harmonic of a Ti: Sa Laser (61.5 nm) Produced in Xe Gas”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOOC004, pp. XX-XX.
- S. Di Mitri, M. Cornacchia, S. V. Milton, and S. Spampinati, “Alternative Scheme of Bunch Length Compression in Linacs for Free Electron Lasers”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP033, pp. 1610-1612.
- S. X. Peng et al., “A Non-Intercepting Beam Emittance Measurement Device Based on Neutral Beam Fluorescence Method at PKU”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF10, pp. 522-524.
- N. Iida et al., “Pulse-to-Pulse Switching Injection to Three Rings of Different Energies from a Single Electron Linac at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP110, pp. 2769-2771.
- R. R?ícz et al., “Structural Information on the ECR Plasma by X-ray Imaging”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 30-34.
- F. M?®ot, H. Huang, W. W. MacKay, and T. Roser, “Spin Dynamics Simulations At AGS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD001, pp. 666-668.
- D. Boutin, A. Chance, B. Dalena, B. J. Holzer, and D. Schulte, “Updates on the Optic Corrections of FCC-hh”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 133-136.
- V. D. Shiltsev and P. Piot, “ASTA at Fermilab: Accelerator Physics and Accelerator Education Programs at the Modern Accelerator R&D Users Facility for HEP and Accelerator Applications”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC15, pp. 96-98.
- Y. Yamazaki and M. Kinsho, “Discussion on RCS versus AR on the Basis of J-PARC Beam Commissioning for Pulsed Spallation Neutron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP084, pp. 3557-3559.
- T. Maruta et al., “Power ramp up and minimization of beam losses at the facility for Rare Isotope Beams”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR03, unpublished.
- D. A. Dimitrov et al., “Modeling Localized States and Band Bending Effects on Electron Emission Ion from GaAs”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA21, pp. 225-227.
- Y. Iwashita et al., “Non-destructive Inspections for SC Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB053, pp. 294-296.
Back to search