Favourites
For Word
[n] K. B. Scheidt and F. Epaud, “Installation and Commissioning of a Complete Upgrade of the BPM System for the ESRF Storage Ring”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD05, pp. 50-52.
[n] H. Kobayashi et al., “Test Linac Facility at Photon Factory, KEK”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH406, pp. 596-598.
[n] S. Jin et al., “Development of EP System at IHEP”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2890-2892. doi:10.18429/JACoW-IPAC2019-WEPRB037
[n] J. R. Delayen and S. U. De Silva, “Designs of Superconducting Parallel-Bar Deflecting Cavities for Deflecting/Crabbing Applications”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO053, pp. 219-222.
[n] K. Lekomtsev et al., “Drive-Witness Acceleration Scheme Based on Corrugated Dielectric mm-Scale Capillary”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3292-3295. doi:10.18429/JACoW-IPAC2017-WEPVA018
[n] L. G. Foggetta et al., “Progresses on !CHAOS Development”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR003, pp. 3969-3971.
[n] C. Pellegrini and S. Park, “Extended Version of an S-Band RF Gun”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 570-573.
[n] X. H. Zhang, J. W. Xia, and Y. J. Yuan, “One Design of Heavy Ion Linac Injector for CSRm”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB043, pp. 573-575.
[n] D. Leitner, “Ion Beam Properties and their Diagnostics for ECR Ion Source Injector Systems”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper WEIMNB01, pp. 498-505.
[n] Y. A. Kot, “Simulations on Operation of the FLASH Injector in Low Charge Regime”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB29, pp. 461-463.
[n] S. Zhang et al., “Aperture Test for Internal Target Operation in the JLAB High-current ERL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA077, pp. 2289-2291.
[n] C. Garion, I. Slits, and J.-P. G. Tock, “Installation and Quality Assurance of the Interconnections between Cryo-assemblies of the LHC Long Straight Sections”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH183, pp. 3227-3229.
[n] J. Chappell, R. T. P. D, and J. Osterhoff, “The FLASHForward Experiment at DESY”, presented at the LINAC'22, Liverpool, UK, Aug.-Sep. 2022, paper MO2AA03, unpublished.
[n] T. Sakurai, T. Inagaki, Y. Otake, and H. Ego, “Design of a C-band Disk-loaded Type Accelerating Structure for a Higher Pulse Repetition Rate in the SACLA Accelerator.”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB084, pp. 372-374.
[n] R. W. Assmann et al., “LHC Collimation: Design and Results from Prototyping and Beam Tests”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP007, pp. 1078-1080.
For LaTeX
Use Complete Form
For BibTeX
References
- K. B. Scheidt and F. Epaud, “Installation and Commissioning of a Complete Upgrade of the BPM System for the ESRF Storage Ring”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD05, pp. 50-52.
- H. Kobayashi et al., “Test Linac Facility at Photon Factory, KEK”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH406, pp. 596-598.
- S. Jin et al., “Development of EP System at IHEP”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2890-2892.
- J. R. Delayen and S. U. De Silva, “Designs of Superconducting Parallel-Bar Deflecting Cavities for Deflecting/Crabbing Applications”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO053, pp. 219-222.
- K. Lekomtsev et al., “Drive-Witness Acceleration Scheme Based on Corrugated Dielectric mm-Scale Capillary”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3292-3295.
- L. G. Foggetta et al., “Progresses on !CHAOS Development”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR003, pp. 3969-3971.
- C. Pellegrini and S. Park, “Extended Version of an S-Band RF Gun”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 570-573.
- X. H. Zhang, J. W. Xia, and Y. J. Yuan, “One Design of Heavy Ion Linac Injector for CSRm”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB043, pp. 573-575.
- D. Leitner, “Ion Beam Properties and their Diagnostics for ECR Ion Source Injector Systems”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper WEIMNB01, pp. 498-505.
- Y. A. Kot, “Simulations on Operation of the FLASH Injector in Low Charge Regime”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB29, pp. 461-463.
- S. Zhang et al., “Aperture Test for Internal Target Operation in the JLAB High-current ERL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA077, pp. 2289-2291.
- C. Garion, I. Slits, and J.-P. G. Tock, “Installation and Quality Assurance of the Interconnections between Cryo-assemblies of the LHC Long Straight Sections”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH183, pp. 3227-3229.
- J. Chappell, R. T. P. D, and J. Osterhoff, “The FLASHForward Experiment at DESY”, presented at the 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, paper MO2AA03, unpublished.
- T. Sakurai, T. Inagaki, Y. Otake, and H. Ego, “Design of a C-band Disk-loaded Type Accelerating Structure for a Higher Pulse Repetition Rate in the SACLA Accelerator.”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB084, pp. 372-374.
- R. W. Assmann et al., “LHC Collimation: Design and Results from Prototyping and Beam Tests”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP007, pp. 1078-1080.
Back to search