Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Devanz, P. Bosland, M. Desmons, E. Jacques, M. Luong, and B. Visentin, “Compensation of Lorentz Force Detuning of a TTF 9-cell Cavity with a New Integrated Piezo Tuner”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH140, pp. 378-380.
[n] B. Beaudoin, D. R. Edstrom, A. H. Lumpkin, J. Ruan, and J. C. T. Thangaraj, “Longitudinal Bunch Shaping at Picosecond Scales using Alpha-BBO Crystals at the Advanced Superconducting Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 643-645. doi:10.18429/JACoW-IPAC2015-MOPMA043
[n] S. Seletskiy et al., “Experience with First Turns Commissioning in NSLS-II Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1950-1952. doi:10.18429/JACoW-IPAC2015-TUPMA053
[n] B. Terzic et al., “Long-Term Simulations of Beam-Beam Dynamics on GPUs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3918-3920. doi:10.18429/JACoW-IPAC2017-THPAB086
[n] X. Wu, D. J. Morrissey, B. M. Sherrill, R. C. York, and A. F. Zeller, “Tracking Studies and Performance Simulations of the NSCL A1900 Fragment Separator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P016, pp. 198-200.
[n] M. Hu et al., “Beam Profile Measurement with Flying Wires at the Fermilab Recycler Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT031, pp. 2182-2184.
[n] O. Kamigaito et al., “Acceleration of High-Intensity Heavy-Ion Beams at RIKEN RI Beam Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 800-802. doi:10.18429/JACoW-IPAC2014-MOPRI082
[n] C. Birattari, M. Bonardi, F. Groppi, L. Gini, and M. F. Stroosnijder, “Cyclotron Production of Very High Specific Activity" Platinum Radiotracers in No Carrier Added Form"”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-18, pp. XX-XX.
[n] B. Yee-Rendon et al., “Electron Cloud Measurements at J-PARC Main Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 137-139. doi:10.18429/JACoW-IPAC2016-MOPMB024
[n] A. Burrill et al., “Processing and Testing of the SRF Photoinjector Cavity for BERLinPro”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2484-2486. doi:10.18429/JACoW-IPAC2014-WEPRI005
[n] E. Cenni et al., “ESS Prototype Cavities Developed at CEA Saclay”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1143-1146. doi:10.18429/JACoW-SRF2019-THP096
[n] E.-S. Kim, J. Bahng, and J. Qiang, “Design Study of the Low Energy Beam Transport System at RISP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO037, pp. 1955-1957.
[n] N. T. Rider et al., “Development and Commissioning of the Next Generation X-ray Beam Size Monitor in CESR”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 229-232. doi:10.18429/JACoW-IBIC2016-MOPG68
[n] H.-W. Glock, A. Frahm, J. Knobloch, and A. Neumann, “Status of the BERLinPro Main Linac Module”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1823-1826. doi:10.18429/JACoW-IPAC2016-TUPOW033
[n] S. Banerjee, M. G. Abbott, L. Bobb, and I. Kempf, “Modified Fast Orbit Feedback Controller for Disturbance Attenuation in Long Straights for Diamond-II”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 119-122. doi:10.18429/JACoW-IBIC2023-MOP041
[n] G. V. Eremeev et al., “4 K SRF Operation of the 10 MeV CEBAF Photo-Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 155-157. doi:10.18429/JACoW-LINAC2016-MOPLR010
[n] L. T. Sun et al., “Intense Beam Ion Sources Development at IMP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEOAB201, pp. 2082-2084.
[n] S. J. Li, C. H. Li, J. Liu, H. Wang, and Z. Wang, “Design of the Girder Control System for HEPS-TF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4560-4561. doi:10.18429/JACoW-IPAC2017-THPVA053
[n] W. Knulst, O. J. Luiten, M. J. van der Wiel, and J. Verhoeven, “A Tabletop Soft X-Ray Source based on 5-10 MeV LINACs”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B07, pp. 2609-2611.
[n] J. Wei et al., “An Anti-symmetric Lattice for High Intensity Rapid-cycling Synchrotrons”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH137, pp. 369-371.
[n] J. Qiang, I. Hofmann, and R. D. Ryne, “Space-Charge Driven Emittance Growth in a 3D Mismatched Anisotropic Beam”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG031, pp. 2954-2956.
[n] M. Pieck, C. Hatch, E. Westbrook, and H. Watkins, “LANSCE's instrumentation and controls system modernization”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4783-4786. doi:10.18429/JACoW-IPAC2023-THPL133
[n] M. Masuzawa, Y. Funakoshi, T. T. Nakamura, and J.-I. Odagiri, “Beam Orbit Control System for the KEKB Crab Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS031, pp. 613-615.
[n] M. Abo-Bakr et al., “Progress Report of the Berlin Energy Recovery Project BERLinPro”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1438-1441. doi:10.18429/JACoW-IPAC2015-TUPWA018
[n] C. Zhang, J. Cao, Q. Y. Deng, and Y. F. Sui, “A Laser Wire System at Electron Beam Transport Line in BEPCII”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR034, pp. 852-854.
[n] D. Belver, J. Feuchtwanger, P. J. Gonzalez, F. J. Bermejo, V. Etxebarria, and J. Jugo, “Design and Measurements of a Test Stand for the SEM-Grid System of the ESS-BILBAO”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR040, pp. 867-869.
[n] J. P. Sikora et al., “Design of an Electron Cloud Detector in a Quadrupole Magnet at CesrTA”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 704-707. doi:10.18429/JACoW-IBIC2016-WEPG35
For LaTeX
Use Complete Form
For BibTeX
References
- G. Devanz, P. Bosland, M. Desmons, E. Jacques, M. Luong, and B. Visentin, “Compensation of Lorentz Force Detuning of a TTF 9-cell Cavity with a New Integrated Piezo Tuner”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH140, pp. 378-380.
- B. Beaudoin, D. R. Edstrom, A. H. Lumpkin, J. Ruan, and J. C. T. Thangaraj, “Longitudinal Bunch Shaping at Picosecond Scales using Alpha-BBO Crystals at the Advanced Superconducting Test Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 643-645.
- S. Seletskiy et al., “Experience with First Turns Commissioning in NSLS-II Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1950-1952.
- B. Terzic et al., “Long-Term Simulations of Beam-Beam Dynamics on GPUs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3918-3920.
- X. Wu, D. J. Morrissey, B. M. Sherrill, R. C. York, and A. F. Zeller, “Tracking Studies and Performance Simulations of the NSCL A1900 Fragment Separator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P016, pp. 198-200.
- M. Hu et al., “Beam Profile Measurement with Flying Wires at the Fermilab Recycler Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT031, pp. 2182-2184.
- O. Kamigaito et al., “Acceleration of High-Intensity Heavy-Ion Beams at RIKEN RI Beam Factory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 800-802.
- C. Birattari, M. Bonardi, F. Groppi, L. Gini, and M. F. Stroosnijder, “Cyclotron Production of Very High Specific Activity" Platinum Radiotracers in No Carrier Added Form"”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-18, pp. XX-XX.
- B. Yee-Rendon et al., “Electron Cloud Measurements at J-PARC Main Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 137-139.
- A. Burrill et al., “Processing and Testing of the SRF Photoinjector Cavity for BERLinPro”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2484-2486.
- E. Cenni et al., “ESS Prototype Cavities Developed at CEA Saclay”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1143-1146.
- E.-S. Kim, J. Bahng, and J. Qiang, “Design Study of the Low Energy Beam Transport System at RISP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO037, pp. 1955-1957.
- N. T. Rider et al., “Development and Commissioning of the Next Generation X-ray Beam Size Monitor in CESR”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 229-232.
- H.-W. Glock, A. Frahm, J. Knobloch, and A. Neumann, “Status of the BERLinPro Main Linac Module”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1823-1826.
- S. Banerjee, M. G. Abbott, L. Bobb, and I. Kempf, “Modified Fast Orbit Feedback Controller for Disturbance Attenuation in Long Straights for Diamond-II”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP041, pp. 119-122.
- G. V. Eremeev et al., “4 K SRF Operation of the 10 MeV CEBAF Photo-Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 155-157.
- L. T. Sun et al., “Intense Beam Ion Sources Development at IMP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEOAB201, pp. 2082-2084.
- S. J. Li, C. H. Li, J. Liu, H. Wang, and Z. Wang, “Design of the Girder Control System for HEPS-TF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4560-4561.
- W. Knulst, O. J. Luiten, M. J. van der Wiel, and J. Verhoeven, “A Tabletop Soft X-Ray Source based on 5-10 MeV LINACs”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B07, pp. 2609-2611.
- J. Wei et al., “An Anti-symmetric Lattice for High Intensity Rapid-cycling Synchrotrons”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH137, pp. 369-371.
- J. Qiang, I. Hofmann, and R. D. Ryne, “Space-Charge Driven Emittance Growth in a 3D Mismatched Anisotropic Beam”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG031, pp. 2954-2956.
- M. Pieck, C. Hatch, E. Westbrook, and H. Watkins, “LANSCE's instrumentation and controls system modernization”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL133, pp. 4783-4786.
- M. Masuzawa, Y. Funakoshi, T. T. Nakamura, and J.-I. Odagiri, “Beam Orbit Control System for the KEKB Crab Cavities”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS031, pp. 613-615.
- M. Abo-Bakr et al., “Progress Report of the Berlin Energy Recovery Project BERLinPro”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1438-1441.
- C. Zhang, J. Cao, Q. Y. Deng, and Y. F. Sui, “A Laser Wire System at Electron Beam Transport Line in BEPCII”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR034, pp. 852-854.
- D. Belver, J. Feuchtwanger, P. J. Gonzalez, F. J. Bermejo, V. Etxebarria, and J. Jugo, “Design and Measurements of a Test Stand for the SEM-Grid System of the ESS-BILBAO”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR040, pp. 867-869.
- J. P. Sikora et al., “Design of an Electron Cloud Detector in a Quadrupole Magnet at CesrTA”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 704-707.
Back to search