Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Farokhi, “Self-Field in Free-Electron Laser with Planar Wiggler and Ion Channel Guiding”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP020, pp. XX-XX.
[n] C. Tang, H. Chen, Y. Hu, Y. Z. Lin, and D. Tong, “An X-Band Disk-and-Washer Accelerating Structure for Electron Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH089, pp. 975-977.
[n] S. H. Chang et al., “The Improvements of Vacuum Performance at Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP39C, pp. 2175-2177.
[n] C. S. Chen and Z.-D. Tsai, “The FPGA-based Power Monitoring System for TPS Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA048, pp. 3252-3254.
[n] M. A. Green, “Cooling Intrinsically Stable Superconducting Magnets with Supercritical Helium”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 669-671.
[n] R. F. Nylander, F. F. Bacci, M. V. Fazio, and J. D. Rogers, “Performance Tests of the 600-kW cw, 80-MHz, Radio-Frequency Systems for the FMIT Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3438-3441.
[n] F. Toufexis et al., “Automated Management of Libera SPARK Module IOCs in SPEAR3”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 51-55. doi:10.18429/JACoW-IBIC2020-TUPP12
[n] J.-C. Chang et al., “Power Saving Status in the NSRRC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI069, pp. 3457-3459.
[n] F. M?®ot, M. Bajard, B. Laun?®, and A. Tkatchenko, “ETOILE Hadrontherapy Project, Review of Design Studies”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI080, pp. 2745-2747.
[n] A. Osa et al., “The RI Beams from the Tokai Radioactive Ion Accelerator Complex (TRIAC)”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper MO-03, pp. XX-XX.
[n] L. Garolfi, C. Bruni, M. El Khaldi, P. Lepercq, C. Vallerand, and N. Faure, “Beam Dynamics Simulations of the Thomx Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3036-3039. doi:10.18429/JACoW-IPAC2016-WEPOY024
[n] S. Kashiwagi, G. Isoyama, R. Kato, N. Noda, K. Tsuchiya, and S. Yamamoto, “Strong Focusing Wiggler for SASE and FEL in the Far-Infrared Region at ISIR, Osaka University”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP059, pp. XX-XX.
[n] J. Norem et al., “Dark Current and X Ray Measurements of an 805 MHz Pillbox Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB003, pp. 1183-1185.
[n] P. K. Skowro, M. Giovannozzi, and A. Huschauer, “Linear and Non-Linear Optics Measurements in PS using Turn-by-Turn BPM Data”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1114-1117. doi:10.18429/JACoW-IPAC2019-MOPTS102
[n] C. K. Kuan et al., “Heat Transfer Analysis of a Water-cooled Channel for the TPS Front End Components”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI072, pp. 3466-3468.
[n] C. M. Chu et al., “First Test of Orbit Response Matrix in Proton Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V042, pp. 1481-1483.
[n] M. Min, A. Mametjanov, and J. Fu, “Hybrid Programming and Performance for Beam Propagation Modeling”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC1, pp. 284-286.
[n] M. Portillo, T. A. Barlow, J. A. Nolen, and Jr., “Design Layout of an Isobar Separator Based on 5th Order Calculations”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH073, pp. 3015-3017.
[n] Z. Altinbas, J. P. Jamilkowski, D. Kayran, R. C. Lee, and B. Oerter, “The Machine Protection System for the R&D Energy Recovery LINAC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP277, pp. 630-632.
[n] T. Adachi and I. Sakai, “Estimation of the Particle Density in Transverse Phase Space Using a Multi-Wire Profile Monitor”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP25F, pp. 1479-1481.
[n] H. Bluem, J. Rathke, T. Schultheiss, and M. Cole, “Thermal Structural Analysis of an SCRF Photocathode Electron Gun Cavity”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB12, pp. 119-121.
[n] K. Lee, E. Hashimoto, S. Hirai, T. Natsui, M. Uesaka, and T. Yamamoto, “Material Recognition System using 950 keV X-band Linac with Dual Energy X-ray Scintillator Array”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA030, pp. 130-132.
[n] Q. Qin et al., “Design and Optimization of the BEPCII Synchrotron Radiation Mode”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP019, pp. 1132-1134.
[n] A. Ratti et al., “Using the BRAN Luminosity Detectors for Beam Emittance Monitoring During LHC Physics Runs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR076, pp. 966-968.
[n] R. Servranckx, “Magnetic Field Quality Requirements for PEP”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1197-1200.
[n] Y. Shobuda, Y. H. Chin, M. Ikegami, and T. Toyama, “Stabilization of Beam Instability due to Space-Charge Effects at J-PARC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP072, pp. 4701-4703.
[n] A. Pisent, R. Celentano, and R. Zennaro, “Equivalent Lumped Circuit Study for the Field Stabilization of a Long Four-Vanes RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4086, pp. 968-970.
[n] K. Suganuma, K. Fujirai, M. Kinsho, P. K. Saha, and Y. Yamazaki, “Operating Experience of Water Cooling System in the J-PARC LINAC and RCS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2203-2205. doi:10.18429/JACoW-IPAC2018-WEPAL022
[n] M. Nomura et al., “Condition of MA Cut Cores in the RF Cavities of J-PARC Main Ring after Several Years of Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC019, pp. 107-109.
[n] R. A. Byrns, “Review of SC/RF Refrigeration Systems”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89D03, pp. XX-XX.
[n] R. Corsini, J.-P. Potier, L. Rinolfi, and T. Risselada, “Isochronous Optics and Related Measurements in EPA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B07, pp. 1021-1023.
[n] J. M. Jowett et al., “Bound-Free Pair Production in LHC Pb-Pb Operation at 6.37 Z TeV per Beam”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1497-1500. doi:10.18429/JACoW-IPAC2016-TUPMW028
[n] M. Kim, J. Kim, S. W. Lee, I. H. Nam, and H. Suk, “Feasibility Study of a Laser-Driven High Energy Electron Acceleration in a Long Up-Ramp Density”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2576-2578. doi:10.18429/JACoW-IPAC2016-WEPMY014
[n] B. C. Brown et al., “Studies of Beam Properties and Main Injector Loss Control using Collimators in the Fermilab Booster to Main Injector Transfer Line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS010, pp. 1670-1672.
[n] S. Morton, D. Bizzozero, L. Ge, Z. Li, E. Nanni, and W. H. Tan, “Damping Higher Order Modes for the Cool Copper Collider”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1342, unpublished.
[n] K. Hatanaka, M. Fukuda, T. Yorita, T. Kawaguchi, K. Noda, and Y. Sakemi, “Application of HTS Wire to Magnets”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP085, pp. 224-226.
[n] E. Kadokura, T. Ishida, and T. Kawakubo, “Direct Measuring System of the Time Dependence of the Beam Size by a Non-destructive Beam Profile Monitor”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1652-1655.
[n] G. A. Karamysheva et al., “Center Region Design of the Superconducting Cyclotron C400”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB025, pp. 221-223.
[n] K. Haga et al., “Global Feedback System For Photon Factory Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP31F, pp. 1726-1728.
[n] A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB036, pp. 933-935.
[n] M. Izawa et al., “Beam Test of a SiC Duct Developed for an RF Damped Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP053L, pp. 2006-2007.
[n] C. S. Chen et al., “The Flexible Customized Supervisor and Control System for Utility in TPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1085-1087. doi:10.18429/JACoW-IPAC2015-MOPTY063
[n] M. Min and P. F. Fischer, “Performance Analysis on the IBM Blue Gene/P for Wakefield Calculations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP137, pp. 1737-1739.
[n] F. Kramer, J. Knobloch, O. Kugeler, and J. M. K?Âszegi, “Mapping Flux Trapping in SRF Cavities to Analyze the Impact of Geometry”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 364-369. doi:10.18429/JACoW-SRF2019-TUFUB3
[n] K. A. Brown et al., “Control Systems Issues and Planning for eRHIC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB03, pp. 58-61.
[n] B. Laluc, T. Maillard, and A. Riquer, “Piezo Technology in Synchrotron”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 321-323. doi:10.18429/JACoW-MEDSI2018-THOPMA01
For LaTeX
Use Complete Form
For BibTeX
References
- B. Farokhi, “Self-Field in Free-Electron Laser with Planar Wiggler and Ion Channel Guiding”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP020, pp. XX-XX.
- C. Tang, H. Chen, Y. Hu, Y. Z. Lin, and D. Tong, “An X-Band Disk-and-Washer Accelerating Structure for Electron Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH089, pp. 975-977.
- S. H. Chang et al., “The Improvements of Vacuum Performance at Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP39C, pp. 2175-2177.
- C. S. Chen and Z.-D. Tsai, “The FPGA-based Power Monitoring System for TPS Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA048, pp. 3252-3254.
- M. A. Green, “Cooling Intrinsically Stable Superconducting Magnets with Supercritical Helium”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 669-671.
- R. F. Nylander, F. F. Bacci, M. V. Fazio, and J. D. Rogers, “Performance Tests of the 600-kW cw, 80-MHz, Radio-Frequency Systems for the FMIT Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3438-3441.
- F. Toufexis et al., “Automated Management of Libera SPARK Module IOCs in SPEAR3”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 51-55.
- J.-C. Chang et al., “Power Saving Status in the NSRRC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI069, pp. 3457-3459.
- F. M?®ot, M. Bajard, B. Laun?®, and A. Tkatchenko, “ETOILE Hadrontherapy Project, Review of Design Studies”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI080, pp. 2745-2747.
- A. Osa et al., “The RI Beams from the Tokai Radioactive Ion Accelerator Complex (TRIAC)”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper MO-03, pp. XX-XX.
- L. Garolfi, C. Bruni, M. El Khaldi, P. Lepercq, C. Vallerand, and N. Faure, “Beam Dynamics Simulations of the Thomx Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3036-3039.
- S. Kashiwagi, G. Isoyama, R. Kato, N. Noda, K. Tsuchiya, and S. Yamamoto, “Strong Focusing Wiggler for SASE and FEL in the Far-Infrared Region at ISIR, Osaka University”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP059, pp. XX-XX.
- J. Norem et al., “Dark Current and X Ray Measurements of an 805 MHz Pillbox Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB003, pp. 1183-1185.
- P. K. Skowro, M. Giovannozzi, and A. Huschauer, “Linear and Non-Linear Optics Measurements in PS using Turn-by-Turn BPM Data”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1114-1117.
- C. K. Kuan et al., “Heat Transfer Analysis of a Water-cooled Channel for the TPS Front End Components”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI072, pp. 3466-3468.
- C. M. Chu et al., “First Test of Orbit Response Matrix in Proton Storage Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V042, pp. 1481-1483.
- M. Min, A. Mametjanov, and J. Fu, “Hybrid Programming and Performance for Beam Propagation Modeling”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC1, pp. 284-286.
- M. Portillo, T. A. Barlow, J. A. Nolen, and Jr., “Design Layout of an Isobar Separator Based on 5th Order Calculations”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH073, pp. 3015-3017.
- Z. Altinbas, J. P. Jamilkowski, D. Kayran, R. C. Lee, and B. Oerter, “The Machine Protection System for the R&D Energy Recovery LINAC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP277, pp. 630-632.
- T. Adachi and I. Sakai, “Estimation of the Particle Density in Transverse Phase Space Using a Multi-Wire Profile Monitor”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP25F, pp. 1479-1481.
- H. Bluem, J. Rathke, T. Schultheiss, and M. Cole, “Thermal Structural Analysis of an SCRF Photocathode Electron Gun Cavity”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOB12, pp. 119-121.
- K. Lee, E. Hashimoto, S. Hirai, T. Natsui, M. Uesaka, and T. Yamamoto, “Material Recognition System using 950 keV X-band Linac with Dual Energy X-ray Scintillator Array”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA030, pp. 130-132.
- Q. Qin et al., “Design and Optimization of the BEPCII Synchrotron Radiation Mode”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP019, pp. 1132-1134.
- A. Ratti et al., “Using the BRAN Luminosity Detectors for Beam Emittance Monitoring During LHC Physics Runs”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR076, pp. 966-968.
- R. Servranckx, “Magnetic Field Quality Requirements for PEP”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1197-1200.
- Y. Shobuda, Y. H. Chin, M. Ikegami, and T. Toyama, “Stabilization of Beam Instability due to Space-Charge Effects at J-PARC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP072, pp. 4701-4703.
- A. Pisent, R. Celentano, and R. Zennaro, “Equivalent Lumped Circuit Study for the Field Stabilization of a Long Four-Vanes RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4086, pp. 968-970.
- K. Suganuma, K. Fujirai, M. Kinsho, P. K. Saha, and Y. Yamazaki, “Operating Experience of Water Cooling System in the J-PARC LINAC and RCS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2203-2205.
- M. Nomura et al., “Condition of MA Cut Cores in the RF Cavities of J-PARC Main Ring after Several Years of Operation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC019, pp. 107-109.
- R. A. Byrns, “Review of SC/RF Refrigeration Systems”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89D03, pp. XX-XX.
- R. Corsini, J.-P. Potier, L. Rinolfi, and T. Risselada, “Isochronous Optics and Related Measurements in EPA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B07, pp. 1021-1023.
- J. M. Jowett et al., “Bound-Free Pair Production in LHC Pb-Pb Operation at 6.37 Z TeV per Beam”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1497-1500.
- M. Kim, J. Kim, S. W. Lee, I. H. Nam, and H. Suk, “Feasibility Study of a Laser-Driven High Energy Electron Acceleration in a Long Up-Ramp Density”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2576-2578.
- B. C. Brown et al., “Studies of Beam Properties and Main Injector Loss Control using Collimators in the Fermilab Booster to Main Injector Transfer Line”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS010, pp. 1670-1672.
- S. Morton, D. Bizzozero, L. Ge, Z. Li, E. Nanni, and W. H. Tan, “Damping Higher Order Modes for the Cool Copper Collider”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1342, this conference.
- K. Hatanaka, M. Fukuda, T. Yorita, T. Kawaguchi, K. Noda, and Y. Sakemi, “Application of HTS Wire to Magnets”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP085, pp. 224-226.
- E. Kadokura, T. Ishida, and T. Kawakubo, “Direct Measuring System of the Time Dependence of the Beam Size by a Non-destructive Beam Profile Monitor”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1652-1655.
- G. A. Karamysheva et al., “Center Region Design of the Superconducting Cyclotron C400”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB025, pp. 221-223.
- K. Haga et al., “Global Feedback System For Photon Factory Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP31F, pp. 1726-1728.
- A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB036, pp. 933-935.
- M. Izawa et al., “Beam Test of a SiC Duct Developed for an RF Damped Cavity”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP053L, pp. 2006-2007.
- C. S. Chen et al., “The Flexible Customized Supervisor and Control System for Utility in TPS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1085-1087.
- M. Min and P. F. Fischer, “Performance Analysis on the IBM Blue Gene/P for Wakefield Calculations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP137, pp. 1737-1739.
- F. Kramer, J. Knobloch, O. Kugeler, and J. M. K?Âszegi, “Mapping Flux Trapping in SRF Cavities to Analyze the Impact of Geometry”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 364-369.
- K. A. Brown et al., “Control Systems Issues and Planning for eRHIC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB03, pp. 58-61.
- B. Laluc, T. Maillard, and A. Riquer, “Piezo Technology in Synchrotron”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 321-323.
Back to search