Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
[n] C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 413-419. doi:10.18429/JACoW-MEDSI2016-FRBA02
[n] I. Wilson, W. Schnell, and H. Henke, “Design and Fabrication Studies of High Gradient Accelerating Structures for the CERN Linear Collider (CLIC)”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-13, pp. 556-558.
[n] H. Herminghaus et al., “First Operation of the 850 MeV C.W. Electron Accelerator ''MAMI''”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU422, pp. 362-363.
[n] K. Vetter et al., “NSLS-II RF Beam Position Monitor Update”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper WECP02, pp. 238-241.
[n] T. Hakulinen, P. Ninin, R. Nunes, and T. R. Riesco, “Revisiting CERN Safety System Monitoring (SSM)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC055, pp. 218-221.
[n] R. H. Rheaume and R. T. Sanders, “The AGS Conversion Radio Frequency Power Amplifier”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 237-241.
[n] J. F. Denis, D. Bogard, J.-F. Gournay, Y. Lussignol, and P. Mattei, “Diagnostic Controls of IFMIF-EVEDA Prototype Accelerator”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC026, pp. 1144-1146.
[n] P. Anger et al., “Irradiation Control of the quot;SPIRALquot; Target by Measuring the Ion Beam Intensity via a Fast Current Transformer.”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT028, pp. XX-XX.
[n] A. Gabriel et al., “The National Spallation Neutron Source Target Station: A General Overview”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B012, pp. 86-88.
[n] J. E. Allinger, G. T. Danby, J. W. Jackson, and L. W. Smith, “Large Cost Reductions Made Possible by Reevaluation of Beam Transoprt Parameters”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 797-802.
[n] C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Effect of Transverse Radiation Defocusing in Post-Saturation Regime of High-Gain X-Ray Free-Electron Laser”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4418-4421. doi:10.18429/JACoW-IPAC2018-THPMK056
[n] M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n] W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2418-2420. doi:10.18429/JACoW-IPAC2017-TUPVA136
[n] M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 179-182. doi:10.18429/JACoW-MEDSI2016-TUPE11
[n] C. Leemann, R. Morgado, and R. Sah, “A New High Intensity K-Beam at the Bevatron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1484-1488.
[n] T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 389-392. doi:10.18429/JACoW-ICALEPCS2015-MOPGF132
[n] N. Nakamura, “Study of Resistive-Wall Beam Breakup”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 16, pp. 45-49.
[n] S. Heifets and R. Rossmanith, “High Repetition Rate Kickers for Linear Colliders”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-09, pp. 547-549.
[n] C. Widmann et al., “First Tests of a Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 216-219. doi:10.18429/JACoW-IPAC2015-MOPWA045
[n] S. Heifets, “The Lattice Nonlinearities and the Long Term Stability of the SSC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1207-1210.
[n] R. W. Klaffky, W. Broome, R. D, S. L. Kramer, M. G. Thomas, and J. M. Wang, “Longitudinal Coupled Bunch Instabilities on the NSLS X-Ray Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P051, pp. 2305-2307.
[n] J. Norem et al., “The Development of Plasma Lenses for Linear Colliders”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 627-630.
[n] M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14
[n] F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
[n] D. Sertore et al., “Cs2Te Photocathode Robustness Studies”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC075, pp. 241-243.
[n] R. H. Siemann and D. P. Pritzkau, “Results of an RF Pulsed Heating Experiment at SLAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA18, pp. 779-781.
[n] R. Tatchyn, P. Csonka, and A. Toor, “Micropole Undulators in Accelerator and Storage Ring Technology”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1681-1685.
[n] B. G. Chidley, J. C. Brown, S. B. Hodge, J. H. Ormrod, and J. Ungrin, “The Chalk River High Current Test Facility”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper I02, pp. 218-225.
[n] L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 387-390.
[n] S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 572-574. doi:10.18429/JACoW-LINAC2016-TUPLR048
[n] A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 251-254. doi:10.18429/JACoW-ICALEPCS2015-MOPGF070
[n] W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
[n] M. Surman et al., “Electron Diffraction on VELA at Daresbury”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2218-2220. doi:10.18429/JACoW-IPAC2014-WEPRO108
[n] E. L?®corch?® et al., “Preliminary Implementations for the New Spiral2 Project Control System”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP001, pp. 165-167.
[n] R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
[n] J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1151-1153. doi:10.18429/JACoW-IPAC2016-TUPMB019
[n] D. Schrage et al., “CW RFQ Fabrication and Engineering”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1003, pp. 679-683.
[n] T. M. Kerner and R. Warkentien, “The Datacon Master - Renovation of a Datacon Field Bus Communications System for Accelerator Control”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA18, pp. 2232-2234.
[n] J. Preble et al., “SNS Cryomodule Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
[n] D. Berley and G. T. Danby, “Limitations of Heavy Ion Synchrotron Accelerators for Inertial Fusion”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1028-1031.
[n] D. B. Engel, P. Laux, and R. M??ller, “BDNLS - BESSY Device Name Location Service”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN027, pp. 154-156.
[n] N. Angert et al., “Commissioning and First Operation Experience of the New Heavy Ion Injector of the UNILAC”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 167-170.
[n] C. Jamet et al., “Beam Intensity and Energy Control for the SPIRAL2 Facility”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB029, pp. 537-539.
[n] G. A. Loew et al., “The SLC Energy Upgrade Program at SLAC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2748-2751.
[n] N. Yu. Kazarinov, D. Boutin, and F. R. Osswald, “Induced Heating Power Evaluation in RIB Transfer Line of SPIRAL2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 570-572. doi:10.18429/JACoW-IPAC2014-MOPRI001
[n] G. T. Danby, J. W. Jackson, and S. T. Lin, “High-Field Iron Core Magnets”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 894-899.
[n] W. H. Tan et al., “Progress update of the X-band Test Area beamline for upcoming experiments”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB072, unpublished.
[n] J. Pozimski, R. D, A. Jakob, P. Gro, and H. Klein, “Gabor-Plasma Lens Focusing for LEBT Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P007, pp. 174-176.
[n] O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1556-1559. doi:10.18429/JACoW-IPAC2015-TUPWA059
For LaTeX
Use Complete Form
For BibTeX
References
- J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
- C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 413-419.
- I. Wilson, W. Schnell, and H. Henke, “Design and Fabrication Studies of High Gradient Accelerating Structures for the CERN Linear Collider (CLIC)”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-13, pp. 556-558.
- H. Herminghaus et al., “First Operation of the 850 MeV C.W. Electron Accelerator ''MAMI''”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU422, pp. 362-363.
- K. Vetter et al., “NSLS-II RF Beam Position Monitor Update”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper WECP02, pp. 238-241.
- T. Hakulinen, P. Ninin, R. Nunes, and T. R. Riesco, “Revisiting CERN Safety System Monitoring (SSM)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC055, pp. 218-221.
- R. H. Rheaume and R. T. Sanders, “The AGS Conversion Radio Frequency Power Amplifier”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 237-241.
- J. F. Denis, D. Bogard, J.-F. Gournay, Y. Lussignol, and P. Mattei, “Diagnostic Controls of IFMIF-EVEDA Prototype Accelerator”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC026, pp. 1144-1146.
- P. Anger et al., “Irradiation Control of the quot;SPIRALquot; Target by Measuring the Ion Beam Intensity via a Fast Current Transformer.”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT028, pp. XX-XX.
- A. Gabriel et al., “The National Spallation Neutron Source Target Station: A General Overview”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B012, pp. 86-88.
- J. E. Allinger, G. T. Danby, J. W. Jackson, and L. W. Smith, “Large Cost Reductions Made Possible by Reevaluation of Beam Transoprt Parameters”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 797-802.
- C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Effect of Transverse Radiation Defocusing in Post-Saturation Regime of High-Gain X-Ray Free-Electron Laser”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4418-4421.
- M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 102-104.
- W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2418-2420.
- M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 179-182.
- C. Leemann, R. Morgado, and R. Sah, “A New High Intensity K-Beam at the Bevatron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1484-1488.
- T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 389-392.
- N. Nakamura, “Study of Resistive-Wall Beam Breakup”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 16, pp. 45-49.
- S. Heifets and R. Rossmanith, “High Repetition Rate Kickers for Linear Colliders”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-09, pp. 547-549.
- C. Widmann et al., “First Tests of a Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 216-219.
- S. Heifets, “The Lattice Nonlinearities and the Long Term Stability of the SSC”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1207-1210.
- R. W. Klaffky, W. Broome, R. D, S. L. Kramer, M. G. Thomas, and J. M. Wang, “Longitudinal Coupled Bunch Instabilities on the NSLS X-Ray Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P051, pp. 2305-2307.
- J. Norem et al., “The Development of Plasma Lenses for Linear Colliders”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 627-630.
- M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 191-193.
- F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
- D. Sertore et al., “Cs2Te Photocathode Robustness Studies”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC075, pp. 241-243.
- R. H. Siemann and D. P. Pritzkau, “Results of an RF Pulsed Heating Experiment at SLAC”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA18, pp. 779-781.
- R. Tatchyn, P. Csonka, and A. Toor, “Micropole Undulators in Accelerator and Storage Ring Technology”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1681-1685.
- B. G. Chidley, J. C. Brown, S. B. Hodge, J. H. Ormrod, and J. Ungrin, “The Chalk River High Current Test Facility”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper I02, pp. 218-225.
- L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 387-390.
- S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 572-574.
- A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 251-254.
- W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
- M. Surman et al., “Electron Diffraction on VELA at Daresbury”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2218-2220.
- E. L?®corch?® et al., “Preliminary Implementations for the New Spiral2 Project Control System”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP001, pp. 165-167.
- R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
- J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1151-1153.
- D. Schrage et al., “CW RFQ Fabrication and Engineering”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE1003, pp. 679-683.
- T. M. Kerner and R. Warkentien, “The Datacon Master - Renovation of a Datacon Field Bus Communications System for Accelerator Control”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA18, pp. 2232-2234.
- J. Preble et al., “SNS Cryomodule Performance”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
- D. Berley and G. T. Danby, “Limitations of Heavy Ion Synchrotron Accelerators for Inertial Fusion”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1028-1031.
- D. B. Engel, P. Laux, and R. M??ller, “BDNLS - BESSY Device Name Location Service”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN027, pp. 154-156.
- N. Angert et al., “Commissioning and First Operation Experience of the New Heavy Ion Injector of the UNILAC”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 167-170.
- C. Jamet et al., “Beam Intensity and Energy Control for the SPIRAL2 Facility”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB029, pp. 537-539.
- G. A. Loew et al., “The SLC Energy Upgrade Program at SLAC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2748-2751.
- N. Yu. Kazarinov, D. Boutin, and F. R. Osswald, “Induced Heating Power Evaluation in RIB Transfer Line of SPIRAL2”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 570-572.
- G. T. Danby, J. W. Jackson, and S. T. Lin, “High-Field Iron Core Magnets”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 894-899.
- W. H. Tan et al., “Progress update of the X-band Test Area beamline for upcoming experiments”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB072, unpublished.
- J. Pozimski, R. D, A. Jakob, P. Gro, and H. Klein, “Gabor-Plasma Lens Focusing for LEBT Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P007, pp. 174-176.
- O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1556-1559.
Back to search