Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Mosnier, B. Aune, J. Bourbonneux, K. Djidi, M. Juillard, and J. P. Nicolai, “Damping of the HOM'S in a Multicell Superconducting Cavity”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1287-1289.
[n] H. H. Chen et al., “Bz Calculation of TPS Linac Focusing Coils and a Toolkit for Bz Optimization”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4321-4323. doi:10.18429/JACoW-IPAC2017-THPIK098
[n] C. Pagani et al., “A 100-1600 MeV High Current SC Proton Linac for Waste Transmutation and Energy Amplification”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A06, pp. 36-43.
[n] M. Crescenti, F.-J. Etzkorn, C. Fougeron, G. Primadei, A. Schnase, and A. Susini, “The VITROVAC?« Cavity for the TERA/PIMMS Medical Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B08, pp. 1951-1953.
[n] H. Hoteit et al., “Modernizing of magnet power supplies at KARA and a transition to EPICS-based control system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3739-3741. doi:10.18429/JACoW-IPAC2024-THPS08
[n] F. Krienen and J. A. MacLachlan, “Antriproton Collection from a Production Target”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2711-2717.
[n] Z. A. Conway et al., “ILC Testing Program at Cornell University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP046, pp. 927-929.
[n] R. Ballantini, A. Chincarini, G. Gemme, R. Parodi, and A. Podesta, “TWTRAJ, a Computer Code for MP Simulation in Superconducting Cavities”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR008, pp. XX-XX.
[n] M. Biagini et al., “Upgrade of the PEP-II Low Beta Optics”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B08, pp. 430-432.
[n] M. Ferrario et al., “Start to End Simulations for the SPARX Proposal”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB044, pp. 914-916.
[n] J. N. Galayda, R. N. Heese, and S. Krinsky, “Inhomogeneities in Magnetic Field due to Variations of Lamination Gap Heights”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2815-2818.
[n] T. Tajima et al., “Tests on MgB2 for Application to SRF Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH178, pp. 481-483.
[n] H. Tomizawa et al., “Non-destructive Real-time Monitor to Measure 3D-bunch Charge Distribution with Arrival Timing to Maximize 3D Overlapping for HHG-seeded EUV-FEL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB10, pp. 467-469.
[n] S. Holm and A. Johansson, “Invited Paper: The Uppsala Synchrocyclotron and Storage Ring Project”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper O02, pp. 589-594.
[n] M. Zanierato et al., “Nb3Sn Films Depositions from Targets Synthesized via Liquid Tin Diffusion”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 452. doi:10.18429/JACoW-SRF2021-TUPCAV006
[n] B. Busetto, A. Cadoppi, A. Ferrara, E. Maccallini, M. Mura, and T. Porcelli, “Compatibility of non-evaporable ZAO®-based getter pumps with particle-sensitive vacuum applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4313-4315. doi:10.18429/JACoW-IPAC2023-THPA150
[n] C. F. Afonso et al., “Integrating Mobile Devices Into CNAO's Control System, a Web Service Approach to Device Communication”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 191. doi:10.18429/JACoW-ICALEPCS2019-MOPHA003
For LaTeX
Use Complete Form
For BibTeX
References
- A. Mosnier, B. Aune, J. Bourbonneux, K. Djidi, M. Juillard, and J. P. Nicolai, “Damping of the HOM'S in a Multicell Superconducting Cavity”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1287-1289.
- H. H. Chen et al., “Bz Calculation of TPS Linac Focusing Coils and a Toolkit for Bz Optimization”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4321-4323.
- C. Pagani et al., “A 100-1600 MeV High Current SC Proton Linac for Waste Transmutation and Energy Amplification”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A06, pp. 36-43.
- M. Crescenti, F.-J. Etzkorn, C. Fougeron, G. Primadei, A. Schnase, and A. Susini, “The VITROVAC?« Cavity for the TERA/PIMMS Medical Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B08, pp. 1951-1953.
- H. Hoteit et al., “Modernizing of magnet power supplies at KARA and a transition to EPICS-based control system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS08, pp. 3739-3741.
- F. Krienen and J. A. MacLachlan, “Antriproton Collection from a Production Target”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2711-2717.
- Z. A. Conway et al., “ILC Testing Program at Cornell University”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP046, pp. 927-929.
- R. Ballantini, A. Chincarini, G. Gemme, R. Parodi, and A. Podesta, “TWTRAJ, a Computer Code for MP Simulation in Superconducting Cavities”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR008, pp. XX-XX.
- M. Biagini et al., “Upgrade of the PEP-II Low Beta Optics”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B08, pp. 430-432.
- M. Ferrario et al., “Start to End Simulations for the SPARX Proposal”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB044, pp. 914-916.
- J. N. Galayda, R. N. Heese, and S. Krinsky, “Inhomogeneities in Magnetic Field due to Variations of Lamination Gap Heights”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2815-2818.
- T. Tajima et al., “Tests on MgB2 for Application to SRF Cavities”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH178, pp. 481-483.
- H. Tomizawa et al., “Non-destructive Real-time Monitor to Measure 3D-bunch Charge Distribution with Arrival Timing to Maximize 3D Overlapping for HHG-seeded EUV-FEL”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB10, pp. 467-469.
- S. Holm and A. Johansson, “Invited Paper: The Uppsala Synchrocyclotron and Storage Ring Project”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper O02, pp. 589-594.
- M. Zanierato et al., “Nb3Sn Films Depositions from Targets Synthesized via Liquid Tin Diffusion”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 452.
- B. Busetto, A. Cadoppi, A. Ferrara, E. Maccallini, M. Mura, and T. Porcelli, “Compatibility of non-evaporable ZAO®-based getter pumps with particle-sensitive vacuum applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA150, pp. 4313-4315.
- C. F. Afonso et al., “Integrating Mobile Devices Into CNAO's Control System, a Web Service Approach to Device Communication”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 191.
Back to search