JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	B. G. Martlew, M. J. Pugh, and W. R. Rawlinson, “Planned Upgrades to the SRS Control System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1788-1791. 
[n]	B. C. Brown, D. Capista, I. Kourbanis, N. V. Mokhov, and V. Sidorov, “Collimation System for the Fermilab Booster to Main Injector Transfer Line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS011, pp. 1673-1675. 
[n]	G. S. Gevorkyan, T. J. Hanks, A. H. Kachwala, S. S. Karkare, C. J. Knill, and C. A. Sarabia Cardenas, “Design of a 200 kV DC Cryocooled Photoemission Gun for Photocathode Investigations”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 292-295. doi:10.18429/JACoW-NAPAC2022-TUYD6
[n]	K. Popov, A. Aryshev, and N. Terunuma, “Electron beam and laser-Compton X-ray parameters stabilization simulation study at KEK Laser-Undulator Compact X-ray facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB062, unpublished. 
[n]	K. Murakoshi et al., “Development of a Detection System for Quasi-Monochromatic THz Pulse by a Spatially Modulated Electron Beam”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2469-2471. doi:10.18429/JACoW-IPAC2022-THPOST013
[n]	X. Artru et al., “Experimental Investigations on Geometrical Resolution of Electron Beam Profiles given by OTR in the GeV Energy Range”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP060L, pp. 1686-1688. 
[n]	A. Andersson et al., “Recent Accelerator Development at MAXlab”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP24G, pp. 577-578. 
[n]	C. Hernalsteens et al., “Effect of a Spurious CLIQ Firing on the Circulating Beam in HL-LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1862-1865. doi:10.18429/JACoW-IPAC2022-WEPOPT013
[n]	J. J. Barnard, W. M. Sharp, T. J. Fessenden, D. A. Callahan, and A. B. Langdon, “Correction of Longitudinal Errors in Accelerators for Heavy-Ion Fusion”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 733-736. 
[n]	G. Trovato et al., “Innovative resistive X-ray beam position monitors based on Silicon Carbide free-standing membrane”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper WEPCO17, unpublished. 
[n]	Ya. V. Shashkov, M. Gusarova, M. V. Lalayan, and N. Yu. Samarokov, “Accelerating Cavities with HOM Damping for USSR-4  Storage Ring”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 367-369. doi:10.18429/JACoW-RuPAC2021-WEPSC13
[n]	J. Bojowald, J. Dietrich, I. Mohos, and R. Wagner, “Transverse Measurements with Kicker Excitation at COSY-Juelich”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP055L, pp. 1675-1677. 
[n]	T. Nagatomo et al., “New 28-GHz Superconducting ECR Ion Source for Synthesizing New Super Heavy Elements of Z > 118”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 53-57. doi:10.18429/JACoW-ECRIS2018-TUA3
[n]	Y. Wu, F. Kroes, J. Noomen, J. van der Laan, G. Luijckx, and R. Maas, “Commissioning Results of the Amsterdam Pulse Stretcher/Storage Ring AmPS”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1998-2001. 
[n]	D. Bafia et al., “R&D Towards High Gradient CW SRF Cavities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 295-299. doi:10.18429/JACoW-LINAC2022-TU1AA03
[n]	H. C. Hseuh et al., “Commissioning of RHIC Vacuum Systems”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THDR2, pp. 557-561. 
[n]	Y. Hao and V. Ptitsyn, “Frequency Scaling Study of Crab Cavity for Future Colliders with Crab Crossing”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2532-2534. doi:10.18429/JACoW-IPAC2016-WEPMW043
[n]	J. L. Crisp, S. De Santis, N. Eddy, I. Kourbanis, K. Seiya, and R. M. Zwaska, “Measurement of Electron Cloud Density With Microwaves in the Fermilab Main Injector”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB23, pp. 216-218. 
[n]	N. Steinhau-Kuehl, A. Matheisen, B. Meyer, and B. Petersen, “Quality Control of the Electro Polishing Process at DESY”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT057, pp. 3369-3371. 
[n]	D. K. Jiang, “The Vacuum System for the SSRF Storage Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA059, pp. 708-710. 
[n]	S. Petracca, I. M. Pinto, and F. Ruggiero, “Normal Mode Laslett Coefficients”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP070G, pp. 1408-1410. 
[n]	D. L. Hall et al., “High Quality Factor Studies in SRF Nb3Sn Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB044, pp. 661-664. 
[n]	E. Hamwi, D. Barber, G. Hoffstaetter, and J. Devlin, “Modeling interference of two first-order resonances with two Siberian snakes using machine learning”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 682-685. doi:10.18429/JACoW-IPAC2024-MOPS02
[n]	F.-T. Chung et al., “Development of a quality test platform for solid-state power amplifiers in NSRRC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3707-3709. doi:10.18429/JACoW-IPAC2024-THPR84
[n]	R. L. Kustom, G. Mavrogenes, and G. Nicholls, “The RF System of the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1910-1913. 
[n]	S. Kikuchi, D. Nagae, and N. Hayashizaki, “Development of He2+ 10GHz ECR ion source for astatine generation accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2412-2415. doi:10.18429/JACoW-IPAC2023-TUPM088
[n]	S. Liuzzo, L. Farvacque, N. Carmignani, and S. White, “Benchmark of AT vs MADX-PTC with exact integrators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 709-712. doi:10.18429/JACoW-IPAC2024-MOPS09
[n]	R. Yadav, A. Penirschke, and S. Preu, “Intermediate Frequency Circuit Components for Integration of on-Chip Amplifier With THz Detectors”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 204-208. doi:10.18429/JACoW-IBIC2023-TUP010
[n]	L. Ioudin, V. V. Martynenko, and V. A. Rezvov, “Kurchatov Synchrotron Radiation Source: General-Purpose TV System for Beam Monitoring and Inspection of Accelerator Equipment Rooms”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP084L, pp. 1719-1721. 
[n]	F. Curbis et al., “Status of the Soft X-Ray Laser (SXL) Project at MAX IV Laboratory”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 749-752. doi:10.18429/JACoW-FEL2019-THP084
[n]	G. D. Yendell, U. K. Pedersen, M. P. Taylor, A. Greer, A. B. Neaves, and T. C. Nicholls, “Implementing Odin as a Control and Data Acquisition Framework for Eiger Detectors”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1597. doi:10.18429/JACoW-ICALEPCS2019-THBPP05
[n]	L.-J. Chen et al., “Design and integration on the test station for PSM of a 300 kW transmitter”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1002-1004. doi:10.18429/JACoW-IPAC2023-MOPM013
[n]	P. S. Plattner, F. Hug, and T. Stengler, “Refurbishment of SRF Cavities and HOM Antenna Coating Studies for the Mainz Energy-Recovering Superconducting Accelerator (MESA)”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1226-1229. doi:10.18429/JACoW-IPAC2022-TUPOTK014
[n]	J. R. Leibfritz et al., “Status of the Fermilab Electron Cooling Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT151, pp. 1485-1487. 
[n]	M. Krasilnikov et al., “Characterization of a single-pass high-gain THz FEL at PITZ”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 416-419. doi:10.18429/JACoW-IPAC2024-MOPG68
[n]	J. L. Munoz et al., “Mechanical Fabrication of ESS-Bilbao RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4279-4281. doi:10.18429/JACoW-IPAC2017-THPIK083
[n]	W. Chen, Y. Kang, B. Jiang, C. Feng, and H. Sun, “A modified round to flat beam transformation lattice for angular dispersion induced microbunching technique”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2770-2773. doi:10.18429/JACoW-IPAC2023-WEPA050
[n]	N. La Rosa et al., “Novel high-current multichannel ammeter for X-ray Beam Position Monitoring (XBPM) applications”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper WEPMO35, unpublished. 
[n]	B. A. Bowling and C. McDowell, “CEBAF Beam Viewer Imaging Software”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2477-2480. 
[n]	H. Y. Barminova, “Effective Emittance Growth in Beam with Gaussian Density Profile”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR025, pp. 2988-2990. 
[n]	S. W. Wang, B. Li, J. L. Li, W. B. Wu, W. Xu, and X. Zhou, “Lattice Tweaking Using A Tune Knob Based On Global Mechanism”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4620-4622. doi:10.18429/JACoW-IPAC2018-THPMK129
[n]	J. Reich, H. Beuscher, R. K. Bhandari, J. I. M. Botman, and H. L. Hagedoorn, “Partial Beam Decorrelation of Sources Providing Ion Out of Axial Magnetic Fields”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 833-836. 
[n]	T. Huang, X. Song, and J. Xing, “Design of bellows in HALF vacuum system”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB115, unpublished. 
[n]	S. Hancock and A. Chanc?®, “Stacking Simulations in the Beta-beam Decay Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS085, pp. 1699-1701. 
[n]	S. D. M. Di Mitri et al., “Electron beam simulations for the FERMI project at ELETTRA”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS25, pp. XX-XX. 
[n]	Q. Li et al., “Design of a Ku-band side-coupled standing wave 2.5 MeV accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1993-1995. doi:10.18429/JACoW-IPAC2024-WEPC17
[n]	H. C. Ho et al., “An Assembling Calibration Method of XBPM Diamond Blades in TPS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 54-56. doi:10.18429/JACoW-MEDSI2016-MOPE23
[n]	J. T. Rogers, “Photoelectron Trapping Mechanism for Transverse Coupled Bunch Mode Growth in CESR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB15, pp. 3052-3054. 
[n]	K. R. L. Baker et al., “Development of a Virtual Diagnostic for Estimating Key Beam Descriptors”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 969-972. doi:10.18429/JACoW-IPAC2022-TUPOST048
[n]	P. Tenenbaum and D. Onoprienko, “Direct Measurement of the Resistive Wakefield in Tapered Collimators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT158, pp. 2212-2214. 
[n]	I. Bustinduy et al., “Progress on ESS Medium Energy Beam Transport”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP025, pp. 484-486. 
[n]	A. Deyhim, J. D. Kulesza, and K. I. Blomqvist, “Development of Accurate and Precise In-Vacuum Undulator System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP237, pp. 1268-1270. 
[n]	R. Huang et al., “Design of the beam transport lines for Super Tau-Charm Facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS142, unpublished. 
[n]	X. R. Hao, “HOMs Extraction Structure Design for HEPS 166.6 MHz Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 403-407. doi:10.18429/JACoW-SRF2019-TUP008
[n]	J. Qiu, J. Tang, S. Wang, and J. Wei, “Transverse Phase Space Painting for the CSNS Injection”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS115, pp. 1774-1776. 
[n]	H. Jeevakhan and G. Mishra, “Harmonic Undulator Radiation with Dual Non Periodic Magnetic Components”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 98-102. doi:10.18429/JACoW-FLS2018-WEA2WD04
[n]	J. Bradley III et al., “An Overview of the Low Energy Demonstration Accelerator (LEDA) Project RF Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W016, pp. 1147-1149. 
[n]	J. M. Potter, F. J. Humphry, and S. O. Schriber, “Experimental and Calculated RF Properties of the Disk-and-Washer Structure”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3763-3767. 
[n]	M. Georgsson and P. Roejsel, “Vibration Measurements on the MAX-II Beam”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP03J, pp. 1586-1588. 
[n]	V. I. Maslov, I. P. Levchuk, and I. N. Onishchenko, “Self-focusing and Wakefield-focusing of Relativistic Electron Bunches in Plasma”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2602-2604. doi:10.18429/JACoW-IPAC2016-WEPMY023
[n]	D. Boutin et al., “Residual Orbit Correction Studies for the FCC-hh”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3332-3334. doi:10.18429/JACoW-IPAC2016-THPMB042
[n]	T. Linnecar and E. Shaposhnikova, “Another Method to Measure the Low-Frequency Machine Impedance”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP016G, pp. 1323-1325. 
[n]	T. Bohl, T. P. R. Linnecar, and E. Shaposhnikova, “The Fine Structure of the Longitudinal Machine Impedance Observed with Single Bunches”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6PC004, pp. XX-XX. 
[n]	R. V. Pivin, “Booster Vacuum Control System, NICA Project”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA18, unpublished. 
[n]	W. W. Zhang et al., “Magnetic Field Measurements of Printed-Circuit Quadrupoles and Dipoles”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP170, pp. 3372-3374. 
[n]	Y. W. An, M. T. Li, Y. Li, S. Y. Xu, and Y. Yuan, “Local Orbit Correction Application for CSNS-RCS High Intensity Commissioning”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1865-1868. doi:10.18429/JACoW-IPAC2021-TUPAB195
[n]	M. Bickley, P. Chevtsov, and T. Larrieu, “Device Configuration Handler for Accelerator Control Applications at Jefferson Lab”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP584, pp. XX-XX. 
[n]	T. A. Mohayai, D. V. Neuffer, and P. Snopok, “A Non-parameteric Density Estimation Approach to Measuring Beam Cooling in MICE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1684-1687. doi:10.18429/JACoW-IPAC2018-TUPML063
[n]	B. Dwersteg, G. Weichert, and N. Adelt, “TESLA Main Coupler Development at DESY”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J02, pp. XX-XX. 
[n]	D. E. Johnson, “A Dynamic Dispersion Insert for the Fermilab Main Injector for Momentum Collimation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS019, pp. 1697-1699. 
[n]	G. Cuni, F. Becheri, D. Fernandez-Carreiras, Z. Reszela, and S. Rubio-Manrique, “Introducing the SCRUM Framework as Part of the Product Development Strategy for the ALBA Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 60-63. doi:10.18429/JACoW-ICALEPCS2015-MOD3O04
[n]	M. Belgroune, P. Brunelle, A. Nadji, and L. Nadolski, “Non-linear Transverse Beam Dynamics Studies in the Super-ACO Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE010, pp. 1232-1234. 
[n]	J. A. Einstein-Curtis et al., “Online Correction of Laser Focal Position Using FPGA-Based ML Models”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 857-860. doi:10.18429/JACoW-IPAC2022-TUPOST009
[n]	A. S. Plastun, A. Kolomiets, and T. Tretyakova, “Transit Code for Beam Dynamic Simulation”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA07, pp. 51-53. 
[n]	H. Zen, T. Kii, H. Ohgaki, S. Suphakul, R. Kuroda, and Y. Taira, “Development of Photocachode Drive Laser System for RF Guns in KU-FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP045, pp. 828-831. 
[n]	J. Branlard et al., “Equipping FLASH with MTCA.4-based LLRF System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP085, pp. 1126-1128. 
[n]	V. P. Novikov, A. V. Kharlamov, Yu. S. Khodyrev, and E. V. Serga, “Beam Diagnostics with Optical Means”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1676-1679. 
[n]	T. A. Mohayai, D. V. Neuffer, P. Snopok, and C. T. Rogers, “Simulated Measurements of Beam Cooling in Muon Ionization Cooling Experiment”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 771-774. doi:10.18429/JACoW-NAPAC2016-WEPOA36
[n]	H. S. Jeong et al., “RF Interlock Implementation Using Digital LLRF System for 100 MeV Proton Linac at KOMAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2233-2235. doi:10.18429/JACoW-IPAC2018-WEPAL031
[n]	D. Karlovets, A. Dyatlov, V. Kobets, M. Martyanov, and M. Nozdrin, “Status report on modification of a 5 MeV electron photo-gun for generating vortex electrons at JINR”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS101, unpublished. 
[n]	Q. Gao, “Single-Shot Wakefield Measurement System”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THZBB2, unpublished. 
[n]	J. J. Deng et al., “Design of The Dragon-I Linear Induction Accelerator”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO403, pp. 40-42. 
[n]	J. Rathke, T. Schultheiss, H. G. Kirk, and J. Rose, “Conceptual Engineering Design of a Bunch Rotation Cavity for a Pion Production and Capture Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH085, pp. 963-965. 
[n]	B. Giaccone, “Overview of Recent Progress of Plasma Processing”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEOTEV01, pp.. 
[n]	F. Sannibale et al., “Commissioning of BL 7.2, the New Diagnostic Beamline at the ALS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT140, pp. 2783-2785. 
[n]	P.-A. Duperrex, “Compact Reconfigurable FPGA Based Beam Current Safety System for UCN”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD75, pp. 218-220. 
[n]	G. Penco et al., “Two-Bunch Operation at the FERMI FEL Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2663-2665. doi:10.18429/JACoW-IPAC2017-WEPAB037
[n]	V. V. Borisov et al., “Magnetic Measurement System for the NICA Booster Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2696-2699. doi:10.18429/JACoW-IPAC2014-WEPRI088
[n]	B. G. Martlew, M. J. Pugh, and W. R. Rawlinson, “Present Status of the SRS Control System Upgrade Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP025L, pp. 1769-1771. 
[n]	T. Masuda, M. Ishii, K. Kawata, T. Matsushita, and C. Saji, “Re-engineering of the SPring-8 Radiation Monitor Data Acquisition System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS032, pp. 401-404. 
[n]	J. Andersson, F. Curbis, D. Kumbaro, F. Lindau, and S. Werin, “Beam Performance of the Photocathode Gun for the Max IV Linac”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP037, pp. 799-802. 
[n]	L. M. Hovhannisyan, S. T. Hakobyan, D. K. Kalantaryan, A. Streun, and V. M. Tsakanov, “The Acceptance and Photon Beam Formation in SLS FEMTO Beamline”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC112, pp. 2264-2266. 
[n]	R. Irsigler et al., “Compact Solid State RF-Modules for Direct Drive RF-linacs”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC129, pp. 382-384. 
[n]	K. Sugita, P. G. Akishin, E. S. Fischer, A. Mierau, and P. Schnizer, “3D Static and Dynamic Field Quality Calculations for Superconducting SIS100 Corrector Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB027, pp. 337-339. 
[n]	M. E. Veis et al., “80 KW Industrial Electron Accelerators Based on Rectifier”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1500-1502. 
[n]	X. Zhou et al., “Beam Loss Simulation and Radiation Shielding for Top-Off Operation of Hefei Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1845-1847. doi:10.18429/JACoW-IPAC2017-TUPIK066
[n]	M. Comunian, L. Bellan, A. Pisent, and A. V. Ziiatdinova, “Beam Dynamic Simulation for the Beam Line from Charge Breeder to ALPI for SPES Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3255-3257. doi:10.18429/JACoW-IPAC2018-THPAK022
[n]	A. D. Kovalenko et al., “Design and Study of a Superferric Model Dipole and Quadrupole Magnets for the GSI Fast-pulsed Synchrotron SIS100.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF057, pp. 1735-1737. 
[n]	B. G. Martlew, M. J. Pugh, and W. R. Rawlinson, “Plans for the DIAMOND Control System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP024L, pp. 1766-1768. 
[n]	S. Aull, T. Junginger, H. Neupert, and J. Knobloch, “Secondary Electron Yield of SRF Materials”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB050, pp. 686-690. 
[n]	R. Bartolini, M. G. Abbott, I. P. S. Martin, G. Rehm, and J. H. Rowland, “Turn-by-turn Data Acquisition and Post-processing for the Diamond Booster and Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH044, pp. 1103-1105. 
[n]	T. V. Bondarenko et al., “Carbon Field Emission Strip Cathode Electron Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP129, pp. XX-XX. 
[n]	P. Krejcik, “X-ray Pulse Length Characterization Using the Surface Magneto Optic Kerr Effect”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG517, pp. XX-XX. 
[n]	S. Henderson et al., “Beam Dynamics Studies and Beam Quality in the SNS Normal-Conducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE057, pp. 3381-3383. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search