Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Krafczyk, H. Edwards, Q. Kerns, M. May, E. Tilles, and F. Turkot, “A 3 KG Kicker Magnet System for the Tevatron Beam Abort System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2769-2771.
[n] T. H. Johnson et al., “The University of Maryland Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 438-442.
[n] J. Staples, J. Edighoffer, and K.-J. Kim, “Electron Beam Transport for the LBL IR-FEL”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-47, pp. 444-446.
[n] J.-C. Denard et al., “Beam Diagnostics of the ELETTRA Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1091-1094.
[n] H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1410-1413.
[n] J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
[n] J. Hyun et al., “Importance of quadrupole magnet fringing fields in low energy beam transport: example in the LIPAc 5 MeV D+ beamline”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3512-3515. doi:10.18429/JACoW-IPAC2024-THPR14
[n] S. L. Shope, D. E. Hasti, G. W. Kamin, J. W. Poukey, W. W. Rienstra, and W. K. Tucker, “Acceleration and Bending of a Relativistic Electron Beam on the Sandia Recirculating Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 917-920.
[n] G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 454-457.
[n] M. Reiser, P. Delphin, F. Dupont, and T. Zinneman, “Center-Region Design and Initial Orbits in the Maryland University Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 449-454.
[n] K. Potter and S. Turner, “High Precision Scrapers for ISR Luminosity Measurements”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1589-1593.
[n] D. Spence and C. L. Fink, “Production of High Proton Fractions from ECR Sources by Plasma Modification”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-15, pp. 396-397.
[n] M. Mizumoto et al., “A Proton Accelerator for Neutron Science Project at JAERI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5A001, pp. 309-313.
[n] H. G. Blosser, “Magnet Design for the MSU 50 MeV Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F05, pp. XX-XX.
[n] R. Fabris and G. Pangon, “The Injection and Extraction Kicker Magnets of the Elettra Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC074, pp. 2166-2168.
[n] M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
[n] H. G. Blosser, M. Reiser, and M. M. Gordon, “Central - Region Studies for the MSU Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E04, pp. XX-XX.
[n] C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647.
[n] A. Feschenko, V. Gaidash, and S. A. Gavrilov, “Development and Implementation of Bunch Shape Instrumentation for Ion Linacs”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 1-6. doi:10.18429/JACoW-RuPAC2021-MOX02
[n] K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 559-562.
[n] P. Tenenbaum, R. Brinkmann, and V. Tsakanov, “Beam-based Alignment of the TESLA Main Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI054, pp. 515-517.
[n] P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
[n] S. Schaffner et al., “Device Control at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR13, pp. 2265-2267.
[n] I. L. Rakhno, N. V. Mokhov, and K. K. Gudima, “Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4003-4006. doi:10.18429/JACoW-IPAC2015-THPF123
[n] J. Perry and E. Woodworth, “The CEBAF Fast Shutdown System”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU463, pp. 484-486.
[n] M. Fabretto, A. Rindi, and G. Tromba, “Health Physics Approach to Synchrotron Radiation”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1386-1389.
[n] V. P. Nagaslaev, V. A. Lebedev, and S. J. Werkema, “Lattice Optimization for the Stochastic Cooling in the Accumulator Ring at Fermilab”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUA2C09, pp. 110-112.
[n] C. Fischer et al., “Operation of the CERN-ISR for High Luminosity”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1515-1518.
[n] K. Halbach, “Magnet Innovations for Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH2-1, pp. 407-410.
[n] O. A. Anderson and L. L. LoDestro, “Exact Analytic Solution of the Envelope Equations for a Matched Quadrupole-Focused Beam in the Low Space Charge Limit”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS003, pp. 3513-3515.
[n] R. Assmann et al., “Stability Considerations for Final Focus Systems of Future Linear Colliders”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B01, pp. 447-449.
[n] H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1921-1923. doi:10.18429/JACoW-IPAC2016-TUPOY008
[n] P. Chu et al., “XAL-Based Applications and Online Model for LCLS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP022, pp. 4811-4813.
[n] J. M. Schippers et al., “A Novel Design of a Cyclotron Based Accelerator System for Multi-Ion Therapy”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-11, pp. 74-78.
[n] G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
[n] E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Energy Deposition and Activation Studies of the ESSnuSB Horn Station”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 561-563. doi:10.18429/JACoW-IPAC2017-MOPIK029
[n] O. P. Lebedev, N. A. Ignashin, S. V. Ivanov, and S. E. Sytov, “Transverse Feedbacks in the U70 Proton Synchrotron of IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB032, pp. 239-241.
[n] S. M. Alzubaidi, O. Meusel, U. Ratzinger, and C. Wagner, “Control System for FRANZ Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 830-832. doi:10.18429/JACoW-IPAC2015-MOPHA025
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
[n] S. Marcowitz, G. A. Concaildi, and R. George, “Beam Matching, Steering, and Design Using a CDC-924, an Oscilloscope, and Programs Developed at Argonne National Laboratory”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 848-852.
[n] S. Posen et al., “A Booster Replacement Linac for the Future of High Energy Physics at Fermilab”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL116, unpublished.
[n] P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
[n] K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 360-363.
[n] P. F. Rohwer and S. Schneider, “Beam Injection and Extraction for the Separated-Sector Cyclotron of the National Accelerator Centre”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-28, pp. 481-483.
[n] G. Burt et al., “ERL Related HOM Measurements at ELBE”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 31, pp. 129-132.
[n] H. Nishimura, C. Timossi, and M. Valdez, “Accelerator Operation Management Using Objects”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR03, pp. 2244-2246.
[n] L. R. Shen and D. K. Liu, “The SSRF Control System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB009, pp. 2704-2706.
[n] F. Turkot, “Attainment of 500-GeV Beam in the Fermilab Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1512-1515.
[n] I. V. Pogorelov, J. Qiang, R. D. Ryne, M. Venturini, R. L. Warnock, and A. Zholents, “Recent Developments in IMPACT and Application to Future Light Sources”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP01, pp. 182-184.
[n] W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2296-2299. doi:10.18429/JACoW-IPAC2019-WEZZPLS3
[n] K. N. Leung, “Invited Paper: High-Intensity Sources for Light Ions”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-02, pp. 372-376.
[n] R. Hettel et al., “SPEAR 3 Upgrade Project: The Final Year”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPA005, pp. 235-237.
[n] S. E. Sytov, N. A. Ignashin, and V. I. Serebryakov, “Constant Magnetic Field Measuring System in the U-70 Synchrotron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 323-324. doi:10.18429/JACoW-RUPAC2018-WEPSB18
[n] M. Jensen et al., “Testing of the ESS MB-IOT Prototypes”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1759-1764. doi:10.18429/JACoW-IPAC2018-WEXGBF1
[n] Y. C. Nie, M. Huening, C. Liebig, and M. Schmitz, “RF Tuning of a S-band Hybrid Buncher for Injector Upgrade of LINAC II at DESY”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP022, pp. 478-480.
[n] B. Almeida et al., “RF Superconductivity at CEBAF”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91A02, pp. XX-XX.
[n] J. E. Dusatko, J. Browne, A. S. Fisher, K. D. Kotturi, S. R. Norum, and J. J. Olsen, “The LCLS Undulator Beam Loss Monitor Readout System”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM084, pp. 384-388.
[n] T.-C. Fan, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and F.-Y. Lin, “Magnetic Field Measurement and Fine-tuning of Kickers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH186, pp. 3236-3238.
[n] O. V. Singh and R. J. Nawrocky, “Upgrade of Beam Steering System Components and Controls for the NSLS Storage Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1902-1905.
[n] N. Barov, J. S. Kim, and D. J. Newsham, “Resonant-Cavity Diagnostics for an Emittance Exchange Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP040, pp. 3537-3539.
[n] S. J. Lee, J. H. Han, and D. E. Kim, “Elliptically Polarizing Undulator Design for PAL-XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4362-4365. doi:10.18429/JACoW-IPAC2018-THPMK031
For LaTeX
Use Complete Form
For BibTeX
References
- G. Krafczyk, H. Edwards, Q. Kerns, M. May, E. Tilles, and F. Turkot, “A 3 KG Kicker Magnet System for the Tevatron Beam Abort System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2769-2771.
- T. H. Johnson et al., “The University of Maryland Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 438-442.
- J. Staples, J. Edighoffer, and K.-J. Kim, “Electron Beam Transport for the LBL IR-FEL”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-47, pp. 444-446.
- J.-C. Denard et al., “Beam Diagnostics of the ELETTRA Injector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1091-1094.
- H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1410-1413.
- J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
- J. Hyun et al., “Importance of quadrupole magnet fringing fields in low energy beam transport: example in the LIPAc 5 MeV D+ beamline”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR14, pp. 3512-3515.
- S. L. Shope, D. E. Hasti, G. W. Kamin, J. W. Poukey, W. W. Rienstra, and W. K. Tucker, “Acceleration and Bending of a Relativistic Electron Beam on the Sandia Recirculating Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 917-920.
- G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 454-457.
- M. Reiser, P. Delphin, F. Dupont, and T. Zinneman, “Center-Region Design and Initial Orbits in the Maryland University Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 449-454.
- K. Potter and S. Turner, “High Precision Scrapers for ISR Luminosity Measurements”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1589-1593.
- D. Spence and C. L. Fink, “Production of High Proton Fractions from ECR Sources by Plasma Modification”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-15, pp. 396-397.
- M. Mizumoto et al., “A Proton Accelerator for Neutron Science Project at JAERI”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5A001, pp. 309-313.
- H. G. Blosser, “Magnet Design for the MSU 50 MeV Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63F05, pp. XX-XX.
- R. Fabris and G. Pangon, “The Injection and Extraction Kicker Magnets of the Elettra Booster”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC074, pp. 2166-2168.
- M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
- H. G. Blosser, M. Reiser, and M. M. Gordon, “Central - Region Studies for the MSU Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E04, pp. XX-XX.
- C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647.
- A. Feschenko, V. Gaidash, and S. A. Gavrilov, “Development and Implementation of Bunch Shape Instrumentation for Ion Linacs”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 1-6.
- K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 559-562.
- P. Tenenbaum, R. Brinkmann, and V. Tsakanov, “Beam-based Alignment of the TESLA Main Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI054, pp. 515-517.
- P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
- S. Schaffner et al., “Device Control at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR13, pp. 2265-2267.
- I. L. Rakhno, N. V. Mokhov, and K. K. Gudima, “Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4003-4006.
- J. Perry and E. Woodworth, “The CEBAF Fast Shutdown System”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU463, pp. 484-486.
- M. Fabretto, A. Rindi, and G. Tromba, “Health Physics Approach to Synchrotron Radiation”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1386-1389.
- V. P. Nagaslaev, V. A. Lebedev, and S. J. Werkema, “Lattice Optimization for the Stochastic Cooling in the Accumulator Ring at Fermilab”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUA2C09, pp. 110-112.
- C. Fischer et al., “Operation of the CERN-ISR for High Luminosity”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1515-1518.
- K. Halbach, “Magnet Innovations for Linacs”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH2-1, pp. 407-410.
- O. A. Anderson and L. L. LoDestro, “Exact Analytic Solution of the Envelope Equations for a Matched Quadrupole-Focused Beam in the Low Space Charge Limit”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS003, pp. 3513-3515.
- R. Assmann et al., “Stability Considerations for Final Focus Systems of Future Linear Colliders”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B01, pp. 447-449.
- H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1921-1923.
- P. Chu et al., “XAL-Based Applications and Online Model for LCLS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP022, pp. 4811-4813.
- J. M. Schippers et al., “A Novel Design of a Cyclotron Based Accelerator System for Multi-Ion Therapy”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-11, pp. 74-78.
- G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
- E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Energy Deposition and Activation Studies of the ESSnuSB Horn Station”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 561-563.
- O. P. Lebedev, N. A. Ignashin, S. V. Ivanov, and S. E. Sytov, “Transverse Feedbacks in the U70 Proton Synchrotron of IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB032, pp. 239-241.
- S. M. Alzubaidi, O. Meusel, U. Ratzinger, and C. Wagner, “Control System for FRANZ Facility”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 830-832.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
- S. Marcowitz, G. A. Concaildi, and R. George, “Beam Matching, Steering, and Design Using a CDC-924, an Oscilloscope, and Programs Developed at Argonne National Laboratory”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 848-852.
- S. Posen et al., “A Booster Replacement Linac for the Future of High Energy Physics at Fermilab”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL116, unpublished.
- P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
- K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 360-363.
- P. F. Rohwer and S. Schneider, “Beam Injection and Extraction for the Separated-Sector Cyclotron of the National Accelerator Centre”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-28, pp. 481-483.
- G. Burt et al., “ERL Related HOM Measurements at ELBE”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 31, pp. 129-132.
- H. Nishimura, C. Timossi, and M. Valdez, “Accelerator Operation Management Using Objects”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR03, pp. 2244-2246.
- L. R. Shen and D. K. Liu, “The SSRF Control System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB009, pp. 2704-2706.
- F. Turkot, “Attainment of 500-GeV Beam in the Fermilab Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1512-1515.
- I. V. Pogorelov, J. Qiang, R. D. Ryne, M. Venturini, R. L. Warnock, and A. Zholents, “Recent Developments in IMPACT and Application to Future Light Sources”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP01, pp. 182-184.
- W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2296-2299.
- K. N. Leung, “Invited Paper: High-Intensity Sources for Light Ions”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-02, pp. 372-376.
- R. Hettel et al., “SPEAR 3 Upgrade Project: The Final Year”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPA005, pp. 235-237.
- S. E. Sytov, N. A. Ignashin, and V. I. Serebryakov, “Constant Magnetic Field Measuring System in the U-70 Synchrotron”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 323-324.
- M. Jensen et al., “Testing of the ESS MB-IOT Prototypes”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1759-1764.
- Y. C. Nie, M. Huening, C. Liebig, and M. Schmitz, “RF Tuning of a S-band Hybrid Buncher for Injector Upgrade of LINAC II at DESY”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP022, pp. 478-480.
- B. Almeida et al., “RF Superconductivity at CEBAF”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91A02, pp. XX-XX.
- J. E. Dusatko, J. Browne, A. S. Fisher, K. D. Kotturi, S. R. Norum, and J. J. Olsen, “The LCLS Undulator Beam Loss Monitor Readout System”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM084, pp. 384-388.
- T.-C. Fan, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and F.-Y. Lin, “Magnetic Field Measurement and Fine-tuning of Kickers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH186, pp. 3236-3238.
- O. V. Singh and R. J. Nawrocky, “Upgrade of Beam Steering System Components and Controls for the NSLS Storage Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1902-1905.
- N. Barov, J. S. Kim, and D. J. Newsham, “Resonant-Cavity Diagnostics for an Emittance Exchange Experiment”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP040, pp. 3537-3539.
- S. J. Lee, J. H. Han, and D. E. Kim, “Elliptically Polarizing Undulator Design for PAL-XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4362-4365.
Back to search