Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Joo, D. Jeon, M. J. Joung, Y. Jung, H. J. Kim, and M. Lee, “Surface Treatment Facilities for SCRF Cavities at RISP”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP084, pp. 619-621.
[n] M. J. Joung, Y. Jung, and H. J. Kim, “The Quality Assurance and Acceptance System of Niobium Material for RAON Cavities”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB07, pp. 206-208.
[n] J. Y. Sheikh and R. J. Burton, “Tuning and Conditioning of RFQ1-1250 Cavity”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-37, pp. 710-712.
[n] G. M. Arbique, B. G. Chidley, G. E. McMichael, W. L. Michel, and J. Y. Sheikh, “Beam Transmission and Emittance Measurements of the RFQ1 Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 845-848.
[n] W. K. Kim et al., “Fabrication and Low Temperature Test Plan for Rare Isotope Science Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 619-621. doi:10.18429/JACoW-LINAC2016-TUPLR072
[n] S. B. van der Geer, M. J. de Loos, W. H. Urbanus, and A. G. A. Verhoeven, “3D Design of the Fusion-FEM Depressed Collector using the General Particle Tracer (GPT) Code”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP84, pp. 2462-2464.
[n] M. Schalwat et al., “Exchange and Repair of Titanium Service Pipes for the EXFEL Series Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB025, pp. 1122-1126.
[n] H. Kim et al., “RAON Superconducting Radio Frequency Test Facility Construction”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP086, pp. 625-627.
[n] K. Hasegawa, N. Ouchi, K. Mukugi, and Co. Ltd, “System Design of a Superconducting Linac for the High-Intensity Proton Accelerator Project (KEK/JAERI Joint Project)”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PS003, pp. XX-XX.
[n] S. Kwiatkowski et al., “HOM Dampers for ALS Storage Ring RF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB023, pp. 1240-1242.
[n] T. Scarvie et al., “Noise Reduction Efforts for the Infrared Beamline at the Advanced Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB018, pp. 869-871.
[n] R. Appleby, D. R. Brett, J. Barranco, R. De Maria, A. Grudiev, and R. Tomas, “Modelling and Long Term Dynamics of Crab Cavities in the LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1578-1581. doi:10.18429/JACoW-IPAC2014-TUPRI014
For LaTeX
Use Complete Form
For BibTeX
References
- J. Joo, D. Jeon, M. J. Joung, Y. Jung, H. J. Kim, and M. Lee, “Surface Treatment Facilities for SCRF Cavities at RISP”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP084, pp. 619-621.
- M. J. Joung, Y. Jung, and H. J. Kim, “The Quality Assurance and Acceptance System of Niobium Material for RAON Cavities”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB07, pp. 206-208.
- J. Y. Sheikh and R. J. Burton, “Tuning and Conditioning of RFQ1-1250 Cavity”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-37, pp. 710-712.
- G. M. Arbique, B. G. Chidley, G. E. McMichael, W. L. Michel, and J. Y. Sheikh, “Beam Transmission and Emittance Measurements of the RFQ1 Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 845-848.
- W. K. Kim et al., “Fabrication and Low Temperature Test Plan for Rare Isotope Science Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 619-621.
- S. B. van der Geer, M. J. de Loos, W. H. Urbanus, and A. G. A. Verhoeven, “3D Design of the Fusion-FEM Depressed Collector using the General Particle Tracer (GPT) Code”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP84, pp. 2462-2464.
- M. Schalwat et al., “Exchange and Repair of Titanium Service Pipes for the EXFEL Series Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB025, pp. 1122-1126.
- H. Kim et al., “RAON Superconducting Radio Frequency Test Facility Construction”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP086, pp. 625-627.
- K. Hasegawa, N. Ouchi, K. Mukugi, and Co. Ltd, “System Design of a Superconducting Linac for the High-Intensity Proton Accelerator Project (KEK/JAERI Joint Project)”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PS003, pp. XX-XX.
- S. Kwiatkowski et al., “HOM Dampers for ALS Storage Ring RF Cavities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB023, pp. 1240-1242.
- T. Scarvie et al., “Noise Reduction Efforts for the Infrared Beamline at the Advanced Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB018, pp. 869-871.
- R. Appleby, D. R. Brett, J. Barranco, R. De Maria, A. Grudiev, and R. Tomas, “Modelling and Long Term Dynamics of Crab Cavities in the LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1578-1581.
Back to search