Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. A. Piminov et al., “VEPP-4M Electron Positron Collider Operation at High Energy”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 34-36. doi:10.18429/JACoW-RuPAC2021-TUA01
[n] S. Bilgen, “DYVACS code: calculation of gas density profiles for dynamic conditions in FCCee accelerator.”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR68, unpublished.
[n] A. Zarrebini et al., “The Effects of Field Emitted Electrons on RF Surface”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP001, pp. 1982-1984.
[n] M. H. Chun et al., “Cure of Coupled Bunch Instabilities in PLS Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A02, pp. 1130-1132.
[n] A. Augustinus, M. Boccioli, P. Ch. Chochula, L. S. Jirden, and G. De Cataldo, “Finite State Machines for Integration and Control in ALICE”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB21, pp. 650-652.
[n] M. Cornacchia, R. Lauckner, W. Mills, R. Stiening, E. J. N. Wilson, and G. von Holtey, “Non Linear Fields in the SPS and Their Compensation”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1482-1485.
[n] R. Martinie et al., “Cooling and thermomechanical studies for the impact tattoos beam dump design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2522-2525. doi:10.18429/JACoW-IPAC2023-TUPM126
[n] S. Adam, J. Cherix, W. Joho, and M. Olivo, “Determination of Effective Acceleration Voltages in Cyclotrons Using the Phase Compression - Phase Expansion Effect”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-06, pp. 2146-2150.
[n] A. Seryi et al., “Hydrostatic Level System for Slow Ground Motion Studies at Fermilab and SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH116, pp. 1479-1481.
[n] V. M. Borin et al., “Measurements of Energy Spread at VEPP-4M”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 469-471. doi:10.18429/JACoW-RUPAC2018-THPSC29
[n] M. Busch et al., “Overview on SC CH-Cavity Development”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2822-2825. doi:10.18429/JACoW-IPAC2019-WEPRB012
[n] I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1927-1930.
[n] E. Mahner, P. Kneisel, N. Pupeter, and G. M??ller, “Effect of Chemical Polishing on the Electron Field Emission of Niobium Samples and Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I51, pp. XX-XX.
[n] J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
[n] D. Kostin et al., “SRF Gun Cavity R&D at DESY”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB056, pp. 1231-1234.
[n] S. C. Schaller et al., “Completion of the LANSCE Proton Storage Ring Control System Upgrade - A Successful Integration of EPICS into a Running Control System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P045, pp. 2464-2466.
[n] W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
[n] B. Zotter, “Comparison of Theory and Experiment on Beam Impedances: The Case of LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 273-277.
[n] F. L. Long, Z. L. Wu, X. Z. Wei, and J. Cheng, “UPGRADE OF THE BEPC STORAGE RING MAGNET TEMPERATURE PROTECTION SYSTEM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP036, pp. XX-XX.
[n] E. P. Gibbons, M. T. Heron, and N. P. Rees, “GDA and EPICS Working in Unison for Science Driven Data Acquisition and Control at Diamond Light Source”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUAAUST01, pp. 529-532.
[n] A. Carballedo et al., “Design and Construction of a PW Experimental System of HV Chamber Adaptable, Modular and Stable”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 99-101. doi:10.18429/JACoW-MEDSI2016-MOPE41
[n] L. T. Sun et al., “Intense Beam Production of Highly Charged Ions by the Superconducting ECR Ion Source SECRAL for Heavy Ion Linacs”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1027-1031. doi:10.18429/JACoW-LINAC2016-FR1A03
For LaTeX
Use Complete Form
For BibTeX
References
- P. A. Piminov et al., “VEPP-4M Electron Positron Collider Operation at High Energy”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 34-36.
- S. Bilgen, “DYVACS code: calculation of gas density profiles for dynamic conditions in FCCee accelerator.”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR68, unpublished.
- A. Zarrebini et al., “The Effects of Field Emitted Electrons on RF Surface”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP001, pp. 1982-1984.
- M. H. Chun et al., “Cure of Coupled Bunch Instabilities in PLS Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A02, pp. 1130-1132.
- A. Augustinus, M. Boccioli, P. Ch. Chochula, L. S. Jirden, and G. De Cataldo, “Finite State Machines for Integration and Control in ALICE”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB21, pp. 650-652.
- M. Cornacchia, R. Lauckner, W. Mills, R. Stiening, E. J. N. Wilson, and G. von Holtey, “Non Linear Fields in the SPS and Their Compensation”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1482-1485.
- R. Martinie et al., “Cooling and thermomechanical studies for the impact tattoos beam dump design”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM126, pp. 2522-2525.
- S. Adam, J. Cherix, W. Joho, and M. Olivo, “Determination of Effective Acceleration Voltages in Cyclotrons Using the Phase Compression - Phase Expansion Effect”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-06, pp. 2146-2150.
- A. Seryi et al., “Hydrostatic Level System for Slow Ground Motion Studies at Fermilab and SLAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH116, pp. 1479-1481.
- V. M. Borin et al., “Measurements of Energy Spread at VEPP-4M”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 469-471.
- M. Busch et al., “Overview on SC CH-Cavity Development”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2822-2825.
- I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1927-1930.
- E. Mahner, P. Kneisel, N. Pupeter, and G. M??ller, “Effect of Chemical Polishing on the Electron Field Emission of Niobium Samples and Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I51, pp. XX-XX.
- J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
- D. Kostin et al., “SRF Gun Cavity R&D at DESY”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB056, pp. 1231-1234.
- S. C. Schaller et al., “Completion of the LANSCE Proton Storage Ring Control System Upgrade - A Successful Integration of EPICS into a Running Control System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P045, pp. 2464-2466.
- W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
- B. Zotter, “Comparison of Theory and Experiment on Beam Impedances: The Case of LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 273-277.
- F. L. Long, Z. L. Wu, X. Z. Wei, and J. Cheng, “UPGRADE OF THE BEPC STORAGE RING MAGNET TEMPERATURE PROTECTION SYSTEM”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP036, pp. XX-XX.
- E. P. Gibbons, M. T. Heron, and N. P. Rees, “GDA and EPICS Working in Unison for Science Driven Data Acquisition and Control at Diamond Light Source”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUAAUST01, pp. 529-532.
- A. Carballedo et al., “Design and Construction of a PW Experimental System of HV Chamber Adaptable, Modular and Stable”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 99-101.
- L. T. Sun et al., “Intense Beam Production of Highly Charged Ions by the Superconducting ECR Ion Source SECRAL for Heavy Ion Linacs”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1027-1031.
Back to search
