Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Turner et al., “Characterization of Flat Multilayer Thin Film Superconductors”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 968-972. doi:10.18429/JACoW-SRF2019-THP048
[n] W. B. Sampson, K. E. Robins, and M. G. Thomas, “Magnetoresistance Elements for the Measurement and Control of Harmonics in Superconducting Accelerator Magnets”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1157-1160.
[n] D. Hoober and V. J. Buchanan, “Conversion of AGS Ring to Modular Construction”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 867-872.
[n] C. J. Gardner et al., “Status and Recent Performance of the Accelerators that Serve as Gold Injector for RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH045, pp. 3326-3328.
[n] A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFO04, pp. XX-XX.
[n] V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
[n] G. Rumolo, J. B. Jeanneret, and D. Schulte, “Vacuum Specifications for the CLIC Main Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE024, pp. 3401-3403.
[n] P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX.
[n] E. Onillon, “Feedback Design Method Review and Comparison”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA17, pp. 1109-1111.
[n] D. Schulte et al., “CLIC Energy Scans”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397.
[n] A. S. Smygacheva et al., “The Feedback System for Damping Coherent Betatron and Synchrotron Oscillations of Electron Beam at Dedicated Synchrotron Radiation Source SIBERIA-2.”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC128, pp. 1359-1361.
[n] A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP10, pp. XX-XX.
[n] F. Burkart et al., “Conceptual Design Considerations for the 50 TeV FCC Beam Dump Insertion”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1356-1359. doi:10.18429/JACoW-IPAC2016-TUPMR047
[n] S. Kozub et al., “SC and HTS-related Activity at IHEP”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 129-133. doi:10.18429/JACoW-RUPAC2016-THZMH01
[n] R. Bodenstein et al., “Status of permanent magnet radiation resiliency studies at CEBAF”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 630-634. doi:10.18429/JACoW-NAPAC2025-WEAN02
[n] A. Y. Zelinsky et al., “Test and Commissioning Results of NSC KIPT 100 MeV/ 100 kW Electron Linear Accelerator, Subcritical Neutron Source Driver”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1751-1753. doi:10.18429/JACoW-IPAC2017-TUPIK033
[n] L. Liu, L. Kang, X. J. Nie, and H. Qu, “DESIGN OF CSNS R DUMP WINDOW”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI026, pp. 3354-3355.
[n] M. N. Stolyarov et al., “Development of Test Facility for HED@FAIR Quadrupoles”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 366-368. doi:10.18429/JACoW-RUPAC2018-WEPSB44
[n] B. Dalena et al., “First Evaluation of Dynamic Aperture at Injection for FCC-hh”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1466-1469. doi:10.18429/JACoW-IPAC2016-TUPMW019
[n] P. Shcherbakov et al., “MAGNETIC PROPERTIES OF SILICON ELECTRICAL STEELS AND ITS APPLICATION IN FAST CYCLING SUPERCONDUCTING MAGNETS AT LOW TEMPERATURES”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP03, pp. XX-XX.
[n] A. L. Healy, G. Burt, M. J. Cliffe, D. M. Graham, S. P. Jamison, and R. Valizadeh, “Design of a Dielectric-lined Waveguide for Terahertz-driven Linear Electron Acceleration”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 158-160. doi:10.18429/JACoW-LINAC2016-MOPLR011
[n] S. P. Jamison et al., “Dielectric and THz Acceleration (Data) Programme at the Cockcroft Institute”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 62-64. doi:10.18429/JACoW-LINAC2016-MOOP09
[n] L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Turner et al., “Characterization of Flat Multilayer Thin Film Superconductors”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 968-972.
- W. B. Sampson, K. E. Robins, and M. G. Thomas, “Magnetoresistance Elements for the Measurement and Control of Harmonics in Superconducting Accelerator Magnets”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1157-1160.
- D. Hoober and V. J. Buchanan, “Conversion of AGS Ring to Modular Construction”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 867-872.
- C. J. Gardner et al., “Status and Recent Performance of the Accelerators that Serve as Gold Injector for RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH045, pp. 3326-3328.
- A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFO04, pp. XX-XX.
- V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
- G. Rumolo, J. B. Jeanneret, and D. Schulte, “Vacuum Specifications for the CLIC Main Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE024, pp. 3401-3403.
- P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX.
- E. Onillon, “Feedback Design Method Review and Comparison”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA17, pp. 1109-1111.
- D. Schulte et al., “CLIC Energy Scans”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397.
- A. S. Smygacheva et al., “The Feedback System for Damping Coherent Betatron and Synchrotron Oscillations of Electron Beam at Dedicated Synchrotron Radiation Source SIBERIA-2.”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC128, pp. 1359-1361.
- A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP10, pp. XX-XX.
- F. Burkart et al., “Conceptual Design Considerations for the 50 TeV FCC Beam Dump Insertion”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1356-1359.
- S. Kozub et al., “SC and HTS-related Activity at IHEP”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 129-133.
- R. Bodenstein et al., “Status of permanent magnet radiation resiliency studies at CEBAF”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 630-634.
- A. Y. Zelinsky et al., “Test and Commissioning Results of NSC KIPT 100 MeV/ 100 kW Electron Linear Accelerator, Subcritical Neutron Source Driver”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1751-1753.
- L. Liu, L. Kang, X. J. Nie, and H. Qu, “DESIGN OF CSNS R DUMP WINDOW”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI026, pp. 3354-3355.
- M. N. Stolyarov et al., “Development of Test Facility for HED@FAIR Quadrupoles”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 366-368.
- B. Dalena et al., “First Evaluation of Dynamic Aperture at Injection for FCC-hh”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1466-1469.
- P. Shcherbakov et al., “MAGNETIC PROPERTIES OF SILICON ELECTRICAL STEELS AND ITS APPLICATION IN FAST CYCLING SUPERCONDUCTING MAGNETS AT LOW TEMPERATURES”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP03, pp. XX-XX.
- A. L. Healy, G. Burt, M. J. Cliffe, D. M. Graham, S. P. Jamison, and R. Valizadeh, “Design of a Dielectric-lined Waveguide for Terahertz-driven Linear Electron Acceleration”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 158-160.
- S. P. Jamison et al., “Dielectric and THz Acceleration (Data) Programme at the Cockcroft Institute”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 62-64.
- L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626.
Back to search