Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Kalantari, T. Korhonen, A. L??deke, and C. Quitmann, “Enhancements of Top-up Operation at the Swiss Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF006, pp. 309-311.
[n] T. Kanesue, S. Ikeda, M. Okamura, and Y. Saito, “Design Study of High Repetition Rate Laser Ion Source for High Power Beam Production”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 638-640. doi:10.18429/JACoW-IPAC2017-MOPIK053
[n] W. Qin et al., “Free-Electron Laser Driven by a 500 MeV Laser Plasma Accelerator Beam”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 217-220. doi:10.18429/JACoW-FEL2015-MOP076
[n] D. H. An et al., “The Stripping Extraction System in the KIRAMS-13 Cyclotron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15014, pp. XX-XX.
[n] S. Ogur et al., “Linac and Damping Ring Designs for the FCC-ee”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 420-423. doi:10.18429/JACoW-IPAC2019-MOPMP002
[n] A. Scarfe, D. Angal-Kalinin, R. Appleby, and J. K. Jones, “ATF2 Spot Size Tuning Using the Rotation Matrix Method”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP071, pp. 2662-2664.
[n] M. V. Fazio, B. E. Carlsten, W. B. Haynes, and R. M. Stringfield, “A 500 MW Annular Beam Relativistic Klystron (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-26, pp. 424-426.
[n] G. L. Sabbi, “Nb3Sn Magnets for the LHC Upgrades”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU1RAI04, pp. 629-629.
[n] P. N. Ostroumov et al., “R&D Towards CW Ion Linacs at ANL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB08, pp. 461-463.
[n] L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
[n] Y. U. Sohn, J. Choi, M.-H. Chun, J. Y. Huang, I. S. Ko, and I. S. Park, “HOM Analysis and Design of its Removal System for SRF 3rd Harmonic RF Cavity in PLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN062, pp. 2179-2181.
[n] J.-W. Kim, D. G. Kim, and C. K. Hwang, “A Low-Level RF Control System for a Quarter-Wave Resonator”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB084, pp. 1020-1022.
[n] M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2258-2261. doi:10.18429/JACoW-IPAC2016-WEPMR003
[n] S. Seletskiy et al., “Status of the LEReC Machine Protection System”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 487-490. doi:10.18429/JACoW-IBIC2017-TH1AB4
[n] L. P. Sun et al., “Operating Status of Injector II RFQ for C-ADS Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 254-256. doi:10.18429/JACoW-LINAC2016-MOPLR053
[n] B. H. Hong et al., “KIRAMS-13 Target for [18F]Fluoride Production”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99909, pp. XX-XX.
[n] H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 245-248. doi:10.18429/JACoW-SRF2017-MOPB078
[n] J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB037, pp. 89-91.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Kalantari, T. Korhonen, A. L??deke, and C. Quitmann, “Enhancements of Top-up Operation at the Swiss Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF006, pp. 309-311.
- T. Kanesue, S. Ikeda, M. Okamura, and Y. Saito, “Design Study of High Repetition Rate Laser Ion Source for High Power Beam Production”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 638-640.
- W. Qin et al., “Free-Electron Laser Driven by a 500 MeV Laser Plasma Accelerator Beam”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 217-220.
- D. H. An et al., “The Stripping Extraction System in the KIRAMS-13 Cyclotron”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15014, pp. XX-XX.
- S. Ogur et al., “Linac and Damping Ring Designs for the FCC-ee”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 420-423.
- A. Scarfe, D. Angal-Kalinin, R. Appleby, and J. K. Jones, “ATF2 Spot Size Tuning Using the Rotation Matrix Method”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP071, pp. 2662-2664.
- M. V. Fazio, B. E. Carlsten, W. B. Haynes, and R. M. Stringfield, “A 500 MW Annular Beam Relativistic Klystron (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-26, pp. 424-426.
- G. L. Sabbi, “Nb3Sn Magnets for the LHC Upgrades”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU1RAI04, pp. 629-629.
- P. N. Ostroumov et al., “R&D Towards CW Ion Linacs at ANL”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB08, pp. 461-463.
- L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
- Y. U. Sohn, J. Choi, M.-H. Chun, J. Y. Huang, I. S. Ko, and I. S. Park, “HOM Analysis and Design of its Removal System for SRF 3rd Harmonic RF Cavity in PLS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN062, pp. 2179-2181.
- J.-W. Kim, D. G. Kim, and C. K. Hwang, “A Low-Level RF Control System for a Quarter-Wave Resonator”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB084, pp. 1020-1022.
- M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2258-2261.
- S. Seletskiy et al., “Status of the LEReC Machine Protection System”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 487-490.
- L. P. Sun et al., “Operating Status of Injector II RFQ for C-ADS Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 254-256.
- B. H. Hong et al., “KIRAMS-13 Target for [18F]Fluoride Production”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99909, pp. XX-XX.
- H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 245-248.
- J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB037, pp. 89-91.
Back to search
