Favourites
For Word
[n] M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3974-3977. doi:10.18429/JACoW-IPAC2019-THPRB072
[n] A. Lyapin et al., “Development of the S-Band BPM System for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP025, pp. 4003-4005.
[n] W. Anders et al., “BERLinPro: a Prototype ERL for Future Synchrotron Light Sources”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO017, pp. 223-227.
[n] G. Issarovitch, D. Proch, D. Reschke, W. Singer, and X. Singer, “Development of Centrifugal Barrel Polishing for Treatment of Superconducting Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP56, pp. 482-485.
[n] M. Takao et al., “Estimation of the Longitudinal Impedance of the ATF Damping Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 506-509.
[n] L. J. Nevay et al., “LHC Collimation and Energy Deposition Studies Using Beam Delivery Simulation (BDSIM)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3101-3103. doi:10.18429/JACoW-IPAC2016-WEPOY047
[n] P. Van Trappen, R. Noulibos, and W. J. M. Weterings, “Stripping Foil Displacement Unit Control for H- Injection in PSB at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 363-366. doi:10.18429/JACoW-ICALEPCS2015-MOPGF121
[n] J. K. Spradlin, C. E. Reece, O. Trofimova, and A-M. Valente-Feliciano, “Automation of Particulate Characterization”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 477-481. doi:10.18429/JACoW-SRF2019-TUP030
[n] S. N. Galyamin, A. Aryshev, A. A. Grigoreva, A. V. Tyukhtin, and V. V. Vorobev, “Radiation from a Dielectrically Loaded Waveguide with Open End”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 228-230. doi:10.18429/JACoW-IPAC2019-MOPGW061
[n] Yuri K. Batygin, “Halo-Free Beam Transport in Nonlinear Focusing Channel”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E201, pp. 611-613.
[n] S. J. Miller, J. Binkowski, M. J. Johnson, Y. Xu, and A. Facco, “Design for Manufacture of Superconducting Halfwave Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO051, pp. 213-215.
[n] O. Mouton et al., “Computer-assisted Electron Beam Characterization at AIRIX Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN013, pp. 3250-3252.
[n] C. Y. Wu et al., “Integration of the Timing System for TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1833-1835. doi:10.18429/JACoW-IPAC2014-TUPRI113
[n] S. R. Mane, “Ideas for Siberian Snakes and Spin Rotators in Very High Energy e+e- Rings”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 47-48. doi:10.18429/JACoW-eeFACT2016-MOT4H7
[n] S. M. Lidia, J. Corlett, J. Pusina, J. Staples, and A. Zholents, “An Injector for the Proposed Berkeley Ultrafast X-Ray Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB021, pp. 2086-2088.
[n] I. N. Onishchenko, V. Kiselev, A. Linnik, V. Mirny, and V. Uskov, “Wakefield Excitation in Plasma Filled Dielectric Structure by a Train of Electron Bunches”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP085, pp. 2995-2997.
[n] Y. Cai, J. Seeman, K. G. Sonnad, and U. Wienands, “Doubling the PEP-II Luminosity in Simulations”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS048, pp. 649-651.
[n] H. J. Kim, “Progress on Superconducting Linac for the RAON Heavy Ion Accelerator”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEA1C02, pp. 180-182.
[n] C. H. Haquin and F. Negoita, “Development of the Thermal Beam Loss Monitors of the Spiral2 Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC043, pp. 181-183.
[n] D. Quartullo, L. Intelisano, I. Karpov, and G. Papotti, “Simulation Studies of Longitudinal Stability for High-Intensity LHC-Type Beams in the CERN SPS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2249-2252. doi:10.18429/JACoW-IPAC2022-WEPOMS009
[n] J. A. Mock, A. S. Fisher, R. T. Herbst, P. Krejcik, and L. Sapozhnikov, “Commissioning of the LCLS-II Machine Protection System for MHz CW Beams”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 154-159. doi:10.18429/JACoW-IBIC2023-TU3I01
[n] D. R. Xu, Z. H. Bai, L. Wang, W. Wang, and H. Xu, “Corrector Layout Optimization Using NSGA-II for HALS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4629-4631. doi:10.18429/JACoW-IPAC2018-THPMK135
[n] L. Hagge et al., “DESY EDMS: Information Management for World-Wide Collaborations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP045, pp. 2896-2898.
[n] R. Boni, “HOM-free Cavities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY01A, pp. 182-186.
[n] B. Franzke and G. Eickhoff, “Separation of Reaction or Decay Products from Cooled Ion Beams Stored in the ESR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1093-1096.
[n] J. Tamura, A. Miura, T. Morishita, H. Ao, T. Maruta, and T. Miyao, “Development of H0 Beam Diagnostic Line in MEBT2 of J-PARC Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 277-279. doi:10.18429/JACoW-LINAC2016-MOPLR063
[n] S. C. Leemann and M. Eriksson, “Coupling and Brightness Considerations for the MAX IV 3 GeV Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO05, pp. 243-245.
For LaTeX
Use Complete Form
For BibTeX
References
- M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3974-3977.
- A. Lyapin et al., “Development of the S-Band BPM System for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP025, pp. 4003-4005.
- W. Anders et al., “BERLinPro: a Prototype ERL for Future Synchrotron Light Sources”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO017, pp. 223-227.
- G. Issarovitch, D. Proch, D. Reschke, W. Singer, and X. Singer, “Development of Centrifugal Barrel Polishing for Treatment of Superconducting Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP56, pp. 482-485.
- M. Takao et al., “Estimation of the Longitudinal Impedance of the ATF Damping Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 506-509.
- L. J. Nevay et al., “LHC Collimation and Energy Deposition Studies Using Beam Delivery Simulation (BDSIM)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3101-3103.
- P. Van Trappen, R. Noulibos, and W. J. M. Weterings, “Stripping Foil Displacement Unit Control for H- Injection in PSB at CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 363-366.
- J. K. Spradlin, C. E. Reece, O. Trofimova, and A-M. Valente-Feliciano, “Automation of Particulate Characterization”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 477-481.
- S. N. Galyamin, A. Aryshev, A. A. Grigoreva, A. V. Tyukhtin, and V. V. Vorobev, “Radiation from a Dielectrically Loaded Waveguide with Open End”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 228-230.
- Yuri K. Batygin, “Halo-Free Beam Transport in Nonlinear Focusing Channel”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E201, pp. 611-613.
- S. J. Miller, J. Binkowski, M. J. Johnson, Y. Xu, and A. Facco, “Design for Manufacture of Superconducting Halfwave Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO051, pp. 213-215.
- O. Mouton et al., “Computer-assisted Electron Beam Characterization at AIRIX Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN013, pp. 3250-3252.
- C. Y. Wu et al., “Integration of the Timing System for TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1833-1835.
- S. R. Mane, “Ideas for Siberian Snakes and Spin Rotators in Very High Energy e+e- Rings”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 47-48.
- S. M. Lidia, J. Corlett, J. Pusina, J. Staples, and A. Zholents, “An Injector for the Proposed Berkeley Ultrafast X-Ray Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB021, pp. 2086-2088.
- I. N. Onishchenko, V. Kiselev, A. Linnik, V. Mirny, and V. Uskov, “Wakefield Excitation in Plasma Filled Dielectric Structure by a Train of Electron Bunches”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP085, pp. 2995-2997.
- Y. Cai, J. Seeman, K. G. Sonnad, and U. Wienands, “Doubling the PEP-II Luminosity in Simulations”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS048, pp. 649-651.
- H. J. Kim, “Progress on Superconducting Linac for the RAON Heavy Ion Accelerator”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEA1C02, pp. 180-182.
- C. H. Haquin and F. Negoita, “Development of the Thermal Beam Loss Monitors of the Spiral2 Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC043, pp. 181-183.
- D. Quartullo, L. Intelisano, I. Karpov, and G. Papotti, “Simulation Studies of Longitudinal Stability for High-Intensity LHC-Type Beams in the CERN SPS”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2249-2252.
- J. A. Mock, A. S. Fisher, R. T. Herbst, P. Krejcik, and L. Sapozhnikov, “Commissioning of the LCLS-II Machine Protection System for MHz CW Beams”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TU3I01, pp. 154-159.
- D. R. Xu, Z. H. Bai, L. Wang, W. Wang, and H. Xu, “Corrector Layout Optimization Using NSGA-II for HALS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4629-4631.
- L. Hagge et al., “DESY EDMS: Information Management for World-Wide Collaborations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP045, pp. 2896-2898.
- R. Boni, “HOM-free Cavities”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY01A, pp. 182-186.
- B. Franzke and G. Eickhoff, “Separation of Reaction or Decay Products from Cooled Ion Beams Stored in the ESR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1093-1096.
- J. Tamura, A. Miura, T. Morishita, H. Ao, T. Maruta, and T. Miyao, “Development of H0 Beam Diagnostic Line in MEBT2 of J-PARC Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 277-279.
- S. C. Leemann and M. Eriksson, “Coupling and Brightness Considerations for the MAX IV 3 GeV Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO05, pp. 243-245.
Back to search