Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Golden et al., “Preliminary Design of the NRL Modified Betatron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2114-2117.
[n] T. Xu et al., “FRIB Cryomodule Design and Production”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 673-678. doi:10.18429/JACoW-LINAC2016-WE2A02
[n] S. Chen et al., “Multi-Pass, Multi-Bunch Beam Breakup of ERLs with 9-cell Tesla Cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA021, pp. 1769-1771.
[n] J. Knobloch and H. Padamsee, “Enhanced Susceptibility of Nb Cavity Equator Welds to the Hydrogen Related Q-virus”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C02, pp. 434-439.
[n] A. D. Wu et al., “The Destructive Effects to the RF Coupler by the Plasma Discharge”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 285-287. doi:10.18429/JACoW-SRF2019-MOP085
[n] G. R. Li et al., “Study of Achieving Low Energy Beam by Energy Degradation and Direct Resonance Extraction in a Compact Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 850-852. doi:10.18429/JACoW-IPAC2016-MOPOY003
[n] F. Antoniou et al., “Performance of SPS Low Transition Energy Optics for LHC Ion Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME046, pp. 1667-1669.
[n] W. J. M. Weterings et al., “Status of the 160 MeV H- Injection into the CERN PSB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR091, pp. 2041-2043.
[n] L. Zhang, Z. Gao, L. B. Liu, F. F. Wang, and B. Zhang, “Improvement of the Linear Part in the Tuner System of ADS 25 MeV Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 250-252. doi:10.18429/JACoW-LINAC2018-MOPO120
[n] A. D. Palczewski, G. V. Eremeev, R. L. Geng, and C. E. Reece, “Quench Studies of Six High Temperature Nitrogen Doped 9 Cell Cavities for Use in the LCLS-II Baseline Prototype Cryo-module at Jefferson Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3528-3531. doi:10.18429/JACoW-IPAC2015-WEPWI019
[n] D. L. Rubin et al., “RF Measurements on High-Tc Materials”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87B05, pp. XX-XX.
[n] A. D. Palczewski, R. L. Geng, and C. E. Reece, “Analysis of New High-Q0 SRF Cavity Tests by Nitrogen Gas Doping at Jefferson Lab”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP138, pp. 736-739.
[n] K. Artoos et al., “Transport and Installation of the LHC Cryo-Magnets”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN067, pp. 305-307.
[n] A. Miyamoto, K. Goto, S. Hanada, S. Sasaki, and H. Tsutsui, “HiSOR-II, Future Plan of Hiroshima Synchrotron Radiation Center”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA029, pp. 2546-2548.
[n] A. D. Wu et al., “Design of a Medium Beta Half-Wave SC Prototype Cavity at IMP”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB015, pp. 1097-1099.
[n] P. L. Fan, Y. M. Li, L. Lin, K. X. Liu, S. W. Quan, and F. Zhu, “Cathode Stalk Optimization for a 325 MHz Superconducting QWR Electron Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2940-2943. doi:10.18429/JACoW-IPAC2015-WEPMN012
[n] H. Junkes, W. Sch?Âllkopf, M. Wesemann, and R. Lange, “Design and Implementation Aspects of the Control System at FHI FEL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC096, pp. 324-327.
[n] P. N. Ostroumov et al., “Development of a Half-Wave Resonator for Project X”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC039, pp. 2295-2297.
[n] A. Neumann, W. Anders, T. Kamps, J. Knobloch, and E. N. Zaplatin, “Photoinjector SRF Cavity Development for BERLinPro”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB12, pp. 837-839.
[n] C. Zhang et al., “The Multipacting Simulation for the New-Shaped QWR using TRACK3P”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB019, pp. 50-52.
[n] J. Borburgh et al., “Concept for Elena Extraction and Beam Transfer Elements”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI061, pp. 422-424.
[n] Z. A. Conway et al., “A New Half-Wave Resonator Cryomodule Design for Project-X”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP054, pp. 3865-3867.
[n] T. Kawakubo, S. Murasugi, and S. Tazawa, “The Kicker Magnet System used to Generate a High Magnetic Field with a Fast Rise and a Long Flat Top”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP082G, pp. 2441-2443.
[n] G. Lanza et al., “Different sputtering configurations for coating 1.5 GHZ copper cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE202, pp. XX-XX.
[n] Z. Q. Yang et al., “Development of Nb?Sn Cavity Coating at IMP”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 21-24. doi:10.18429/JACoW-SRF2019-MOP003
[n] Z. Zheng, J. T. Popielarski, K. Saito, S. Stark, T. Xu, and Y. Yamazaki, “Design and Commissioning of FRIB Multipacting-Free Fundamental Power Coupler”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 767-769. doi:10.18429/JACoW-LINAC2016-THOP10
[n] M.-E. Couprie et al., “Progress on the LUNEX5 project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1416-1418. doi:10.18429/JACoW-IPAC2015-TUPWA011
[n] S. D. Fartoukh et al., “The Achromatic Telescopic Squeezing Scheme: Basic Principles and First Demonstration at the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR068, pp. 1978-1980.
[n] E. Schneidmiller, V. Vogel, H. Weise, and M. V. Yurkov, “Analysis of Parameter Space of a Kilowatt-scale Free Electron Laser for Extreme Ultraviolet Lithography Driven by L-band Superconducting Linear Accelerator Operating in a Burst Mode”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC083, pp. 3086-3088.
[n] T. Tajima, W. Horton, S. Singer, and K. Witte, “Pump Depletion and Laser Staging for Beat-Wave Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3542-3545.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Golden et al., “Preliminary Design of the NRL Modified Betatron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2114-2117.
- T. Xu et al., “FRIB Cryomodule Design and Production”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 673-678.
- S. Chen et al., “Multi-Pass, Multi-Bunch Beam Breakup of ERLs with 9-cell Tesla Cavities”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA021, pp. 1769-1771.
- J. Knobloch and H. Padamsee, “Enhanced Susceptibility of Nb Cavity Equator Welds to the Hydrogen Related Q-virus”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C02, pp. 434-439.
- A. D. Wu et al., “The Destructive Effects to the RF Coupler by the Plasma Discharge”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 285-287.
- G. R. Li et al., “Study of Achieving Low Energy Beam by Energy Degradation and Direct Resonance Extraction in a Compact Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 850-852.
- F. Antoniou et al., “Performance of SPS Low Transition Energy Optics for LHC Ion Beams”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME046, pp. 1667-1669.
- W. J. M. Weterings et al., “Status of the 160 MeV H- Injection into the CERN PSB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR091, pp. 2041-2043.
- L. Zhang, Z. Gao, L. B. Liu, F. F. Wang, and B. Zhang, “Improvement of the Linear Part in the Tuner System of ADS 25 MeV Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 250-252.
- A. D. Palczewski, G. V. Eremeev, R. L. Geng, and C. E. Reece, “Quench Studies of Six High Temperature Nitrogen Doped 9 Cell Cavities for Use in the LCLS-II Baseline Prototype Cryo-module at Jefferson Laboratory”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3528-3531.
- D. L. Rubin et al., “RF Measurements on High-Tc Materials”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87B05, pp. XX-XX.
- A. D. Palczewski, R. L. Geng, and C. E. Reece, “Analysis of New High-Q0 SRF Cavity Tests by Nitrogen Gas Doping at Jefferson Lab”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP138, pp. 736-739.
- K. Artoos et al., “Transport and Installation of the LHC Cryo-Magnets”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN067, pp. 305-307.
- A. Miyamoto, K. Goto, S. Hanada, S. Sasaki, and H. Tsutsui, “HiSOR-II, Future Plan of Hiroshima Synchrotron Radiation Center”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA029, pp. 2546-2548.
- A. D. Wu et al., “Design of a Medium Beta Half-Wave SC Prototype Cavity at IMP”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB015, pp. 1097-1099.
- P. L. Fan, Y. M. Li, L. Lin, K. X. Liu, S. W. Quan, and F. Zhu, “Cathode Stalk Optimization for a 325 MHz Superconducting QWR Electron Gun”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2940-2943.
- H. Junkes, W. Sch?Âllkopf, M. Wesemann, and R. Lange, “Design and Implementation Aspects of the Control System at FHI FEL”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC096, pp. 324-327.
- P. N. Ostroumov et al., “Development of a Half-Wave Resonator for Project X”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC039, pp. 2295-2297.
- A. Neumann, W. Anders, T. Kamps, J. Knobloch, and E. N. Zaplatin, “Photoinjector SRF Cavity Development for BERLinPro”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB12, pp. 837-839.
- C. Zhang et al., “The Multipacting Simulation for the New-Shaped QWR using TRACK3P”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB019, pp. 50-52.
- J. Borburgh et al., “Concept for Elena Extraction and Beam Transfer Elements”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI061, pp. 422-424.
- Z. A. Conway et al., “A New Half-Wave Resonator Cryomodule Design for Project-X”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP054, pp. 3865-3867.
- T. Kawakubo, S. Murasugi, and S. Tazawa, “The Kicker Magnet System used to Generate a High Magnetic Field with a Fast Rise and a Long Flat Top”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP082G, pp. 2441-2443.
- G. Lanza et al., “Different sputtering configurations for coating 1.5 GHZ copper cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WE202, pp. XX-XX.
- Z. Q. Yang et al., “Development of Nb?Sn Cavity Coating at IMP”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 21-24.
- Z. Zheng, J. T. Popielarski, K. Saito, S. Stark, T. Xu, and Y. Yamazaki, “Design and Commissioning of FRIB Multipacting-Free Fundamental Power Coupler”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 767-769.
- M.-E. Couprie et al., “Progress on the LUNEX5 project”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1416-1418.
- S. D. Fartoukh et al., “The Achromatic Telescopic Squeezing Scheme: Basic Principles and First Demonstration at the LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR068, pp. 1978-1980.
- E. Schneidmiller, V. Vogel, H. Weise, and M. V. Yurkov, “Analysis of Parameter Space of a Kilowatt-scale Free Electron Laser for Extreme Ultraviolet Lithography Driven by L-band Superconducting Linear Accelerator Operating in a Burst Mode”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC083, pp. 3086-3088.
- T. Tajima, W. Horton, S. Singer, and K. Witte, “Pump Depletion and Laser Staging for Beat-Wave Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3542-3545.
Back to search