Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. C. Kuo, H. P. Chang, C. S. Hsue, J. C. Lee, and M. H. Wang, “Beam Dynamics of the SRRC 1.3 GeV Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2667-2670.
[n] E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
[n] M. A. Timminset al., “”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. XX-XX. doi:10.18429/JACoW-IPAC2017-WEPVA103
[n] G. Romagnoli et al., “Design of the New PS Internal Dumps, in the Framework of the LHC Injector Upgrade (LIU) Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3521-3523. doi:10.18429/JACoW-IPAC2017-WEPVA109
[n] S. P. M?©ller, N. Hertel, and J. S. Nielsen, “ASTRID2 -The New Low-Emmitance Light Source in Denmark”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA008, pp. 2487-2489.
[n] J. M. Martin Ruiz et al., “Progresses and design development for the CERN ISOLDE beam dumps exchange”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3838-3841. doi:10.18429/JACoW-IPAC2023-WEPM115
[n] M. El Khaldi, J. Bonis, A. Camara, L. Garolfi, and A. Gonnin, “Electromagnetic, Thermal, and Structural Analysis of a THOMX RF Gun Using ANSYS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3925-3927. doi:10.18429/JACoW-IPAC2016-THPOW002
[n] L. Garolfi, M. El Khaldi, and N. Faure, “3 GHz Single Cell Cavity Optimization Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2761-2764. doi:10.18429/JACoW-IPAC2015-WEPMA009
[n] L. Garolfi, C. Bruni, M. El Khaldi, N. Faure, and A. Perez Delaume, “Electron Linac Upgrade for Thomx Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 773-775. doi:10.18429/JACoW-LINAC2016-THOP12
[n] M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886.
[n] K. P. Wootton et al., “Resonant Spin Depolarisation Measurements at the SPEAR3 Electron Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR001, pp. 771-773.
[n] G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815.
[n] S. Jenzer et al., “Study of the Suitability of 3D Printing for Ultra-High Vacuum Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3356-3358. doi:10.18429/JACoW-IPAC2017-WEPVA043
For LaTeX
Use Complete Form
For BibTeX
References
- C. C. Kuo, H. P. Chang, C. S. Hsue, J. C. Lee, and M. H. Wang, “Beam Dynamics of the SRRC 1.3 GeV Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2667-2670.
- E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
- M. A. Timminset al., “”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. XX-XX.
- G. Romagnoli et al., “Design of the New PS Internal Dumps, in the Framework of the LHC Injector Upgrade (LIU) Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3521-3523.
- S. P. M?©ller, N. Hertel, and J. S. Nielsen, “ASTRID2 -The New Low-Emmitance Light Source in Denmark”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA008, pp. 2487-2489.
- J. M. Martin Ruiz et al., “Progresses and design development for the CERN ISOLDE beam dumps exchange”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM115, pp. 3838-3841.
- M. El Khaldi, J. Bonis, A. Camara, L. Garolfi, and A. Gonnin, “Electromagnetic, Thermal, and Structural Analysis of a THOMX RF Gun Using ANSYS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3925-3927.
- L. Garolfi, M. El Khaldi, and N. Faure, “3 GHz Single Cell Cavity Optimization Design”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2761-2764.
- L. Garolfi, C. Bruni, M. El Khaldi, N. Faure, and A. Perez Delaume, “Electron Linac Upgrade for Thomx Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 773-775.
- M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886.
- K. P. Wootton et al., “Resonant Spin Depolarisation Measurements at the SPEAR3 Electron Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR001, pp. 771-773.
- G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815.
- S. Jenzer et al., “Study of the Suitability of 3D Printing for Ultra-High Vacuum Applications”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3356-3358.
Back to search
