Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Jain, S. A. Belomestnykh, I. Ben-Zvi, and W. Xu, “Development of a Fundamental Power Coupler for High-Current Superconducting RF Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC112, pp. 2483-2485.
[n] M. Shuptar et al., “Mechanical Design of the Cryogenic Sub-Systems for ReA6 Quarter Wave Resonator Cryomodule”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA13, pp. 1256-1258.
[n] R. J. Macek et al., “Test of a prototype active damping system for the e-p instability at the LANL PSR”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAX04, pp. 94-98.
[n] T. W. Hardek et al., “Status of the Oak Ridge Spallation Neutron Source (SNS) RF Systems”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOAS3, pp. 2050-2052.
[n] O. Kononenko, C. Adolphsen, Z. Li, T. O. Raubenheimer, and C. H. Rivetta, “Electro-Mechanical Modeling of the LCLS-II Superconducting Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 310-312. doi:10.18429/JACoW-LINAC2016-MOP106006
[n] G. Huang, J. M. Byrd, L. R. Doolittle, J. W. Staples, and R. B. Wilcox, “Signal Processing for High Precision Phase Measurements”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM082, pp. 375-378.
[n] R. Calaga, R. Miyamoto, R. Tomas, and G. Vanbavinckhove, “Beta* Measurement in the LHC Based on K-modulation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ027, pp. 1864-1866.
[n] D. Kuchler, M. O, and R. Scrivens, “First Experience with the Operation of the GTS-LHC Ion Source at 18 GHz”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-11, pp. 89-91.
[n] R. A. Lerche et al., “The NIF Integrated Timing System - Design and Performance”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP069, pp. XX-XX.
[n] R. E. Ricker, T. H. Gnaeupel-Herold, M. R. Stoudt, G. R. Myneni, and P. Kneisel, “Comparison of Deformation in High-Purity Single/Large Grain and Polycrystalline Niobium Superconducting Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP57, pp. 382-382.
[n] J. Haeser, H. Klein, and A. Schempp, “Properties of Spiral Loaded Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1140-1143.
[n] G. Bassi, J. A. Ellison, and K. A. Heinemann, “Comparison of 1D and 2D CSR Models with Application to the Fermi@Elettra Bunch Compressors”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP139, pp. 1743-1745.
[n] X. Wei, G. Andonian, J. B. Rosenzweig, and D. Stratakis, “Standing Wakefield Accelerator Based on Periodic Dielectric Structures”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP011, pp. 124-126.
[n] M. Montis, L. Antoniazzi, A. Baldo, M. G. Giacchini, and A. Rizzo, “ESS Drift Tube Linac Control System Commissioning: Results and Lessons Learned”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1377-1380. doi:10.18429/JACoW-ICALEPCS2023-THPDP030
[n] E. Fagotti, L. Antoniazzi, M. G. Giacchini, F. Grespan, M. Montis, and A. Palmieri, “High-Power RF Test of IFMIF-EVEDA RFQ at INFN-LNL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 975-977. doi:10.18429/JACoW-LINAC2016-THPLR051
[n] E. Chiadroni et al., “Status of Plasma-Based Experiments at the SPARC_LAB Test Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 603-606. doi:10.18429/JACoW-IPAC2018-TUXGBE3
[n] Z. Liptak, L. Guo, M. Kuriki, M. Isobe, N. Yamamoto, and X. Jin, “GaAs cathode activation with Cs-CsO-Sb thin film”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2076-2078. doi:10.18429/JACoW-IPAC2024-WEPC50
For LaTeX
Use Complete Form
For BibTeX
References
- P. Jain, S. A. Belomestnykh, I. Ben-Zvi, and W. Xu, “Development of a Fundamental Power Coupler for High-Current Superconducting RF Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC112, pp. 2483-2485.
- M. Shuptar et al., “Mechanical Design of the Cryogenic Sub-Systems for ReA6 Quarter Wave Resonator Cryomodule”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA13, pp. 1256-1258.
- R. J. Macek et al., “Test of a prototype active damping system for the e-p instability at the LANL PSR”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAX04, pp. 94-98.
- T. W. Hardek et al., “Status of the Oak Ridge Spallation Neutron Source (SNS) RF Systems”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOAS3, pp. 2050-2052.
- O. Kononenko, C. Adolphsen, Z. Li, T. O. Raubenheimer, and C. H. Rivetta, “Electro-Mechanical Modeling of the LCLS-II Superconducting Cavities”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 310-312.
- G. Huang, J. M. Byrd, L. R. Doolittle, J. W. Staples, and R. B. Wilcox, “Signal Processing for High Precision Phase Measurements”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM082, pp. 375-378.
- R. Calaga, R. Miyamoto, R. Tomas, and G. Vanbavinckhove, “Beta* Measurement in the LHC Based on K-modulation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ027, pp. 1864-1866.
- D. Kuchler, M. O, and R. Scrivens, “First Experience with the Operation of the GTS-LHC Ion Source at 18 GHz”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-11, pp. 89-91.
- R. A. Lerche et al., “The NIF Integrated Timing System - Design and Performance”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP069, pp. XX-XX.
- R. E. Ricker, T. H. Gnaeupel-Herold, M. R. Stoudt, G. R. Myneni, and P. Kneisel, “Comparison of Deformation in High-Purity Single/Large Grain and Polycrystalline Niobium Superconducting Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP57, pp. 382-382.
- J. Haeser, H. Klein, and A. Schempp, “Properties of Spiral Loaded Cavities”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1140-1143.
- G. Bassi, J. A. Ellison, and K. A. Heinemann, “Comparison of 1D and 2D CSR Models with Application to the Fermi@Elettra Bunch Compressors”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP139, pp. 1743-1745.
- X. Wei, G. Andonian, J. B. Rosenzweig, and D. Stratakis, “Standing Wakefield Accelerator Based on Periodic Dielectric Structures”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP011, pp. 124-126.
- M. Montis, L. Antoniazzi, A. Baldo, M. G. Giacchini, and A. Rizzo, “ESS Drift Tube Linac Control System Commissioning: Results and Lessons Learned”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP030, pp. 1377-1380.
- E. Fagotti, L. Antoniazzi, M. G. Giacchini, F. Grespan, M. Montis, and A. Palmieri, “High-Power RF Test of IFMIF-EVEDA RFQ at INFN-LNL”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 975-977.
- E. Chiadroni et al., “Status of Plasma-Based Experiments at the SPARC_LAB Test Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 603-606.
- Z. Liptak, L. Guo, M. Kuriki, M. Isobe, N. Yamamoto, and X. Jin, “GaAs cathode activation with Cs-CsO-Sb thin film”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC50, pp. 2076-2078.
Back to search