Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. D. King, “Mechanical Considerations in CW Linacs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2730-2733.
[n] P. J. Bryant, “Synchrotron-Driven Spallation Sources”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG03, pp. 322-326.
[n] J. Marroncle, P. Abbon, J. Egberts, and M. Pomorski, “-loss Detector for IFMIF-EVEDA”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD42, pp. 146-148.
[n] A. I. Pikin et al., “Structure and Design of the Electron Lens for RHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP100, pp. 2309-2311.
[n] R. G. Eichhorn et al., “Cool-Down Performance of the Cornell ERL Cryomodules”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 802-804. doi:10.18429/JACoW-LINAC2016-THPRC015
[n] Y. Luo, M. Bai, F. C. Pilat, T. Satogata, and D. Trbojevic, “IR Optics Measurement with Linear Coupling's Action-Angle Parameterization”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP053, pp. 3218-3220.
[n] M. Benedikt, S. Hancock, and M. Lindroos, “Base Line Design for a Beta-beam Neutrino Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT007, pp. 542-544.
[n] B. C. Kuske and C. J. Metzger-Kraus, “Start-to-end Calculations and Trajectory Correction for BERLinPro”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3167-3170. doi:10.18429/JACoW-IPAC2016-THOBA03
[n] R. Eichhorn and U. Ratzinger, “Development of a Superconducting H-mode Cavity for the Low-Beta Regime”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP022, pp. 462-464.
[n] Y. Zhao, C. Meng, X. Lu, Y. Jiao, and J. Li, “Data processing for profile monitor of HEPS linac”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2652-2655. doi:10.18429/JACoW-IPAC2024-WEPR64
[n] K. Yamamoto, T. Hattori, M. Okamura, and S. Yamada, “The Comparison of a New Beam-Tracking Code to the Acceleration Test”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE081, pp. 4072-4074.
[n] Y. Tanaka et al., “Study for Evaluation of Undulator Magnetic Field Using Vibrating Wire Method”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPB16, pp. 413-416.
[n] S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Effects of Cathode Shapes on BEP and EP During Vertical Surface Treatments on Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO022, pp. 411-417.
[n] S.-W. Jang et al., “Beam diagnostics status for the Korea 4GSR project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2389-2392. doi:10.18429/JACoW-IPAC2024-WEPG70
[n] N. Hosoda, M. Ishii, T. Ohshima, M. Yamaga, T. Fukui, and A. Gimenez, “Pilot Application of New Control System at SPring-8 RF Test Stand”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 597-600. doi:10.18429/JACoW-ICALEPCS2017-TUPHA081
[n] K. Fuchsberger et al., “Kick Response Measurements during LHC Injection Tests and Early LHC Beam Commissioning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC005, pp. 462-464.
[n] K. N. Nii et al., “Vertical Electropolishing of Niobium Nine-Cell Cavity with a Cavity Flipping System for Uniform Removal”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 467-469. doi:10.18429/JACoW-SRF2019-TUP027
[n] P. H. Williams, G. Bassi, H. L. Owen, and S. Thorin, “Collective Effects in a Short-Pulse FEL Driver”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC034, pp. 145-147.
[n] V.G.Kurakin, V.P.Busygin, V.M.Alekseev, A.V.Koltsov (Lebedev Physical Institute, Moscow, Russia), P.V.Kurakin P.V.Kurakin (Keldysh Institute of Applied Mathematics, Moscow, Russia), “Instrumentation for Computer Based Monitoring and Control System Deployment”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MODP31, pp. XX-XX.
[n] M. Portillo et al., “An Achromatic Mass Separator Design for Ions from the EBIT Charge Breeder at the NSCL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP015, pp. 4341-4343.
[n] M. Kase, M. Komiyama, and A. Uchiyama, “Development of Embedded System for Running EPICS IOC by Using Linux and a Single Board Computer”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA09, pp. 334-336.
[n] B. H. Wiik, “The TESLA Project”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A08, pp. 54-78.
[n] E. Blomley, J. Gethmann, S. Marsching, A.-S. Müller, and M. Schuh, “Management of EPICS IOCs in a Distributed Network Environment Using Salt”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1340-1345. doi:10.18429/JACoW-ICALEPCS2023-THPDP020
For LaTeX
Use Complete Form
For BibTeX
References
- J. D. King, “Mechanical Considerations in CW Linacs”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2730-2733.
- P. J. Bryant, “Synchrotron-Driven Spallation Sources”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPG03, pp. 322-326.
- J. Marroncle, P. Abbon, J. Egberts, and M. Pomorski, “-loss Detector for IFMIF-EVEDA”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD42, pp. 146-148.
- A. I. Pikin et al., “Structure and Design of the Electron Lens for RHIC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP100, pp. 2309-2311.
- R. G. Eichhorn et al., “Cool-Down Performance of the Cornell ERL Cryomodules”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 802-804.
- Y. Luo, M. Bai, F. C. Pilat, T. Satogata, and D. Trbojevic, “IR Optics Measurement with Linear Coupling's Action-Angle Parameterization”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP053, pp. 3218-3220.
- M. Benedikt, S. Hancock, and M. Lindroos, “Base Line Design for a Beta-beam Neutrino Facility”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT007, pp. 542-544.
- B. C. Kuske and C. J. Metzger-Kraus, “Start-to-end Calculations and Trajectory Correction for BERLinPro”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3167-3170.
- R. Eichhorn and U. Ratzinger, “Development of a Superconducting H-mode Cavity for the Low-Beta Regime”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP022, pp. 462-464.
- Y. Zhao, C. Meng, X. Lu, Y. Jiao, and J. Li, “Data processing for profile monitor of HEPS linac”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR64, pp. 2652-2655.
- K. Yamamoto, T. Hattori, M. Okamura, and S. Yamada, “The Comparison of a New Beam-Tracking Code to the Acceleration Test”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE081, pp. 4072-4074.
- Y. Tanaka et al., “Study for Evaluation of Undulator Magnetic Field Using Vibrating Wire Method”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPB16, pp. 413-416.
- S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Effects of Cathode Shapes on BEP and EP During Vertical Surface Treatments on Niobium”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO022, pp. 411-417.
- S.-W. Jang et al., “Beam diagnostics status for the Korea 4GSR project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG70, pp. 2389-2392.
- N. Hosoda, M. Ishii, T. Ohshima, M. Yamaga, T. Fukui, and A. Gimenez, “Pilot Application of New Control System at SPring-8 RF Test Stand”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 597-600.
- K. Fuchsberger et al., “Kick Response Measurements during LHC Injection Tests and Early LHC Beam Commissioning”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC005, pp. 462-464.
- K. N. Nii et al., “Vertical Electropolishing of Niobium Nine-Cell Cavity with a Cavity Flipping System for Uniform Removal”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 467-469.
- P. H. Williams, G. Bassi, H. L. Owen, and S. Thorin, “Collective Effects in a Short-Pulse FEL Driver”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC034, pp. 145-147.
- V.G.Kurakin, V.P.Busygin, V.M.Alekseev, A.V.Koltsov (Lebedev Physical Institute, Moscow, Russia), P.V.Kurakin P.V.Kurakin (Keldysh Institute of Applied Mathematics, Moscow, Russia), “Instrumentation for Computer Based Monitoring and Control System Deployment”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MODP31, pp. XX-XX.
- M. Portillo et al., “An Achromatic Mass Separator Design for Ions from the EBIT Charge Breeder at the NSCL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP015, pp. 4341-4343.
- M. Kase, M. Komiyama, and A. Uchiyama, “Development of Embedded System for Running EPICS IOC by Using Linux and a Single Board Computer”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA09, pp. 334-336.
- B. H. Wiik, “The TESLA Project”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A08, pp. 54-78.
- E. Blomley, J. Gethmann, S. Marsching, A.-S. Müller, and M. Schuh, “Management of EPICS IOCs in a Distributed Network Environment Using Salt”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP020, pp. 1340-1345.
Back to search