JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1213-1216. 
[n]	K. Yoshimura et al., “Measurements of Proton Beam Extinction at J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE013, pp. 984-986. 
[n]	K. Katagiri et al., “Design of Beam Transport Lines for Radioisotope Production Systems in NIRS Cyclotron Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2162-2164. doi:10.18429/JACoW-IPAC2014-WEPRO088
[n]	K. Umemori et al., “Comparison of Cavity Fabrication and Performances Between Fine Grains, Large Grains and Seamless Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THAA04, pp. 1006-1011. 
[n]	J. P. Duris, R. K. Li, P. Musumeci, and E. W. Threlkeld, “High Capture Low Energy Spread Inverse Free Electron Laser Accelerator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA16, pp. 619-621. 
[n]	P. C. Chiu et al., “Control Environment of Power Supply for TPS Booster Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3174-3176. doi:10.18429/JACoW-IPAC2014-THPRO121
[n]	L. J. Mao et al., “Experimental Demonstration of Electron Cooling with Bunched Electron Beam”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 61-63. doi:10.18429/JACoW-COOL2017-TUP15
[n]	M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501. 
[n]	D. C. Larbalestier, P. J. Lee, and W. Starch, “Limitation of Critical Current Density by Intermetallic Formation in Fine Filament Nb-Ti Superconductors”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3743-3746. 
[n]	D. V. Neuffer and A. Liu, “Stochastic Injection Scenarios and Performance for NuSTORM”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI055, pp. 1469-1471. 
[n]	P. Tenenbaum, L. Eriksson, T. Markiewicz, T. O. Raubenheimer, and A. Ringwall, “New Developments in the Next Linear Collider Beam Delivery System Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA32, pp. 3462-3464. 
[n]	M. Torikoshi et al., “Development of Superconducting Wiggler at NIRS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE002, pp. 2442-2444. 
[n]	S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991. 
[n]	S. M. Pattalwar et al., “Conceptual Design of a Cryomodule for Compact Crab Cavities for Hi-Lumi LHC”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP087, pp. 353-356. 
[n]	R. Kazimi, J. Hansknecht, M. Spata, and H. Wang, “Source and Extraction for Simultaneous Four-hall Beam Delivery System at CEBAF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI085, pp. 2896-2898. 
[n]	K. Mizushima et al., “Reliable Beam-Intensity Control Technique at the HIMAC Synchrotron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA37, pp. 143-145. 
[n]	K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291. 
[n]	Y.-H. Liu et al., “TPS SR Kicker Prototype Installation Status”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC147, pp. 3230-3232. 
[n]	A. Andersson, “Phase Detection Electronics for CLIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC134, pp. 1338-1340. 
[n]	M. E. Angoletta et al., “Operation and New Capabilities of CERN's Digital LLRF Family for Injectors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4178-4181. doi:10.18429/JACoW-IPAC2023-THPA094
[n]	Y. Hao, “Computation Requirement Towards the Future Electron Ion Collider, eRHIC”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. XX-XX. doi:10.18429/JACoW-ICAP2015-MOBJI3
[n]	D. R. Grosso, R. Cimino, M. Commisso, R. Flammini, R. Larciprete, and R. Wanzenberg, “SEY of Al Samples from the Dipole Chamber of PETRA III at DESY”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS009, pp. 1533-1535. 
[n]	C. H. Yu et al., “BEPCII Performance and Beam Dynamics Studies on Luminosity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1014-1018. doi:10.18429/JACoW-IPAC2016-TUYA01
[n]	Y. J. Pei et al., “A Low Cost and High Efficient Facility for Removal of SO2 and NOx in the Flue Gas from Coal Fire Power Plant”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA011, pp. 660-662. 
[n]	N. Sunilkumar, G. L. Gassner, J. A. Safranek, and Y. T. Yan, “Characterization of Slow Orbit Motion in the SPEAR3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE097, pp. 1215-1217. 
[n]	A. Sato et al., “Ramp;D Status of the High-intense Monochromatic Low-energy Muon Source: PRISM”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS056, pp. 2508-2510. 
[n]	M. A. Kempkes, M. P. J. Gaudreau, I. Roth, and R. P. Torti, “A High Voltage Hard Switch Modulator for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN113, pp. 2301-2303. 
[n]	T. H. Nicol et al., “SSR1 Cryomodule Design PXIE”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD005, pp. 2504-2506. 
[n]	H. Geng, W. B. Liu, W. Qiao, Q. Qin, Y. F. Sui, and Y. Yue, “Emittance Measurement with Multi-wire Scanners for BEPC-II Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME031, pp. 541-543. 
[n]	K. Fukami, K. Kobayashi, C. Mitsuda, T. Nakamura, and K. Soutome, “Beam-based Alignment for Injection Bump Magnets of the Storage Ring using Remote Tilt-control System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC143, pp. 3221-3223. 
[n]	R. Hipple and M. Berz, “Implementation of Benchmarks for Precision Tracking in Storage Rings”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 13-16. doi:10.18429/JACoW-ICAP2015-MODBC3
[n]	M. Betz, O. R. Jones, T. Lefevre, and M. Wendt, “Upgrade of the LHC Schottky Monitor, Operational Experience and First Results”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 226-228. doi:10.18429/JACoW-IPAC2016-MOPMB060
[n]	A. Liu, “Applications of an MPI Enhanced Simulated Annealing Algorithm on nuSTORM and 6D Muon Cooling”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 568-570. doi:10.18429/JACoW-IPAC2015-MOPMA015
[n]	S. Hojo et al., “Present Status of Cyclotrons (NIRS-930, HM-18) at NIRS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT008, pp. 46-48. 
[n]	D. E. Berkaev et al., “Beams Injection System for e+e- Collider VEPP-2000”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS037, pp. 622-624. 
[n]	Y. Li, W. X. Cheng, and L. Yang, “Using Big Data in NSLS-II Storage Ring Commissioning”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 6-8. doi:10.18429/JACoW-ICAP2015-MODBC1
[n]	H.-S. Kang et al., “Current Status of PAL-XFEL Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEODB103, pp. 2074-2076. 
[n]	H. Safa et al., “Specific Resistance Measurement of a Single Grain Boundary in Pure Niobium”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP029, pp. 267-269. 
[n]	T. Saeki and H. Hayano, “Fabrication of TESLA-shape 9-cell Cavities at KEK for Studies on Mass-Production in Collaboration with Industries”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 31-33. doi:10.18429/JACoW-IPAC2015-MOBB2
[n]	K. Baptiste et al., “A Third-Harmonic RF Cavity for the Advanced Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP20F, pp. 1808-1810. 
[n]	C. Y. Kuo et al., “Design and Measurement of the Transfer Line Magnets for the Taiwan Photon Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME036, pp. 3591-3593. 
[n]	X. Q. Ge et al., “Comparison of TiZrV Non-evaporable Getter Films Deposited by DC Magnetron Sputtering or Quantitative Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1283-1285. doi:10.18429/JACoW-IPAC2019-TUPMP021
[n]	L. Carver et al., “Beam loading simulations in PyAT for the ESRF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3181-3184. doi:10.18429/JACoW-IPAC2023-WEPL030
[n]	V. D. Elvira, V. I. Balbekov, P. Lebrun, and P. Spentzouris, “GEANT4 Simulation and Theoretical Studies of a Helical Cooling Channel”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH083, pp. 3873-3875. 
[n]	J. M. Benavent, J. A. Carrasco, E. J. Dede, J. B. Ejea, V. Esteve, and G. Garcera, “A ZVT Converter for Superconducting Corrector Magnet Applications”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP122G, pp. 2367-2372. 
[n]	M. Bozzolan, “BPM Time of Flight Measurements for Setting-up the RF Cavities of the CERN Linac4”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 879-881. doi:10.18429/JACoW-LINAC2018-THPO084
[n]	H. Shimizu et al., “Fabrication and Evaluation of Low RRR Large Grain 1-Cell Cavity”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB030, pp. 1146-1148. 
[n]	F. Curbis, O. Karlberg, S. Thorin, and S. Werin, “Prospects for Longitudinal Phase-space Measurements at the MAX IV Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3665-3667. doi:10.18429/JACoW-IPAC2014-THPME170
[n]	S. X. Peng et al., “Numerical Methods to the Space Charge Compensation (SCC) Effect of the LEBT Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO014, pp. 915-917. 
[n]	H. Jiang, S. Fu, C. Meng, J. Peng, and Y. Zou, “Beam Dynamics Analysis in the Beam Halo Experiments at IHEP”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3159-3161. doi:10.18429/JACoW-IPAC2014-THPRO112
[n]	A. Saa Hernandez and M. Aiba, “Investigation of the Injection Scheme for SLS 2.0”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1720-1723. doi:10.18429/JACoW-IPAC2015-TUPJE046
[n]	D. Arbelaez, A. Madur, S. Marks, S. Prestemon, D. Schlueter, and H.-D. Nuhn, “Error Analysis for Hybrid Undulators”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA24, pp. 387-390. 
[n]	D. Pellegrini, A. Latina, and D. Schulte, “PLACET2: A Novel Code for Beam Dynamics in Recirculating Machines”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 465-467. doi:10.18429/JACoW-IPAC2015-MOPJE068
[n]	C. H. Kuo et al., “The Profile Measurement of Synchrotron Radiation Monitor in NSRRC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP581, pp. XX-XX. 
[n]	W. W. Lee and L. C. Teng, “Beam Bunch Length Matching at Transition Crossing with Space-Charge Forces”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1057-1062. 
[n]	M. D'yachkov, R. Baartman, and F. W. Jones, “Multiturn Simulation of Coherent Betatron Resonance with Space Charge”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB004, pp. 267-269. 
[n]	A. Saa Hernandez, P. J. Spiller, and U. Ratzinger, “Optimization of the Sextupole Scheme and Compensation of the Time-Dependent Field Errors during Slow Extraction from the Superconducting Synchrotron SIS300”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC059, pp. 2151-2153. 
[n]	Z. Liu et al., “NSRL Phase 2 Project”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A002, pp. 636-640. 
[n]	M. Giovannozzi et al., “First Experimental Observations from the LHC Dynamic Aperture Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC081, pp. 1362-1364. 
[n]	J. Y. Hwang et al., “Preinjector Performance Improvement in NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16045, pp. XX-XX. 
[n]	Z. Zhao, C. H. Wang, G. Lei, J. Zhao, K. J. Yue, and J. Liu, “Realization of Linux Platform in Distributed Control System by EPICS at BEPCII”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP525, pp. XX-XX. 
[n]	S. Serkez et al., “Super-X: Simulations for Extremely Hard X-Ray Generation With Short Period Superconducting Undulators for the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 191-194. doi:10.18429/JACoW-FEL2019-TUP061
[n]	M. J. McAteer et al., “Determination of Octupole and Sextupole Polarities in the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME076, pp. 655-657. 
[n]	R. Benjegerdes, A. Faltens, W. Fawley, C. Peters, L. Reginato, and M. Stuart, “Design and Testing of the Magnetic Quadrupole for the Heavy Ion Fusion Program”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP17, pp. 1369-1371. 
[n]	K. W. Kakihara, A. Enomoto, G. Horikoshi, Y. Saito, and I. Sato, “Pressure-Distribution Analysis of the Vacuum System for the KEKB Injector Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-84, pp. 567-569. 
[n]	Z. X. Shao, H. Gao, G. Liu, P. Liu, X. K. Sun, and H. Y. Zhang, “Research and Design of Digital Magnet Power Supply Controller”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1297-1299. doi:10.18429/JACoW-IPAC2019-TUPMP027
[n]	J. Guo and H. Wang, “Harmonic Stripline Kicker for MEIC Bunched Beam Cooler”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper TUPF10, pp. 120-122. 
[n]	A. M. Porcellato et al., “Research and Development in the Field of SCRF at INFN-LNL”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP006, pp. 50-53. 
[n]	M. S. Jaski et al., “Fast-Switching Variably Polarizing Undulator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM08, pp. 1061-1063. 
[n]	J. Pasternak et al., “Spiral FFAG For Hadrontherapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 198-200. 
[n]	R. Voutta et al., “Beam Heat Load Analysis with COLDDIAG: A Cold Vacuum Chamber for Diagnostics”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1459-1461. doi:10.18429/JACoW-IPAC2015-TUPWA025
[n]	F. Ames, R. A. Baartman, P. G. Bricault, K. Jayamanna, and A. Mj?©s, “Operation of an ECRIS Charge State Breeder at TRIUMF”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper THYO01, pp. 163-166. 
[n]	W. Brown et al., “Generation of High Brightness X-Rays with the PLEIADES Thomsen X-Ray Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPB011, pp. 95-97. 
[n]	H. Daniel et al., “Design Status of the Munich Cyclotron SuSe”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2107-2110. 
[n]	Y. T. Yan, M. Bai, and A. Chao, “Proton Storage Ring Optics Modeling with ac-Driven Betatron Motion”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP022, pp. 4356-4356. 
[n]	P. McIntyre and A. Sattarov, “Dynamics of Decay Electrons and Synchrotron Radiation in a TeV Muon Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH314, pp. 3636-3638. 
[n]	J. Le Duff, C. Thomas, G. Bienvenu, H. Sun, M. Fouaidy, and R. Parodi, “RF Pulsed Tests on 3 GHz Niobium Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP107, pp. 913-915. 
[n]	A. Jansson, C. Boehme, B. Cheymol, H. Hassanzadegan, T. J. Shea, and L. Tchelidze, “Beam Diagnostics for ESS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR045, pp. 882-884. 
[n]	A. Saa Hernandez, M. M. Kirk, D. Ondreka, N. Pyka, S. Sorge, and P. J. Spiller, “Optimization of the SIS100 Nonlinear Magnet Scheme for Slow Extraction”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC005, pp. 1158-1160. 
[n]	M. Wang et al., “Investigation of the Effect of Strategically Selected Grain Boundaries on Superconducting Properties of SRF Cavity Niobium”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 787-791. doi:10.18429/JACoW-SRF2017-THPB026

For LaTeX

Use Complete Form

For BibTeX

References

Back to search