Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Wehrli, M. B?Âge, J. Krempasky, and E. D. van Garderen, “Properties of X-ray Beam Position Monitors at the Swiss Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC139, pp. 3312-3314.
[n] D. B. Dobson, A. J. Churby, and E. K. Krieger, “Managing a Product Called NIF - PLM Current State and Processes”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC090, pp. 310-313.
[n] A. Sytov et al., “Full simulation model of crystal-based extraction from an accelerator using BDSim and Geant4 G4ChannelingFastSimModel”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS124, unpublished.
[n] D. H. Han, Y. S. Kim, and M. Kwon, “Coupling Impedance Measurement of Pohang Light Source Storage Ring Vacuum Components”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP100G, pp. 1093-1095.
[n] T. Tajima, H. Miwa, Co. Ltd, and H. Ohta, “Evaluation of Dust Particles in the KEK Clean Room and Cleaning Methods Used for SC Cavity Assembly”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I38, pp. XX-XX.
[n] V. S. Klenov, Yu. V. Kiselev, O. Volodkevich, and V. Zubets, “Development of Remote Control System for H-minus Ions Source of INR LINAC”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC44, pp. 423-425.
[n] Y. Li and J. Pflueger, “Undulator Phase Matching for the the European XFEL”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 103-107. doi:10.18429/JACoW-FLS2018-WEP2PT003
[n] A. Gilmour, W. R. Araujo, and J. M. Polli, “Thermo-Mechanical Aspects of the MOBIPIX, a Compact X-Ray Imaging System with Embedded GPU”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 223-226. doi:10.18429/JACoW-MEDSI2018-WEPH12
[n] G. Arduini et al., “LEP Operation and Performance with 100 GeV Colliding Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUOBF101, pp. 265-267.
[n] G. B. Bowden et al., “Microwave Cold-Testing Techniques for the NLC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP085L, pp. 2056-2058.
[n] H. Sakai et al., “Stable Beam Operation in Compact ERL for Medical and Industrial Application at KEK”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 714. doi:10.18429/JACoW-SRF2021-THOTEV02
[n] J. B. Flanz, “OPERATION OF A CYCLOTRON BASED PROTON THERAPY FACILITY”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19B1, pp. XX-XX.
[n] H. Soltner, U. Bechstedt, J. G. De Villiers, and R. T?Âlle, “Magnetic-Field Calculations for the Magnets of the High-Energy Storage Ring (HESR) at FAIR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP016, pp. 166-168.
[n] T. J. Zhang, C. J. Chu, G. F. Song, S. M. Wei, J. J. Yang, and J. Q. Zhong, “Correction Coil System for Compact High Intensity Cyclotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP012, pp. 157-159.
[n] P. A. Piminov et al., “Study of Beam Dynamics during the Crossing of the Third-Order Resonance at VEPP-4M”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3PBI02, pp. 1894-1898.
[n] N. Kuklev, M. Borland, L. Emery, Y. Hidaka, H. Shang, and Y. Sun, “High efficiency multi-objective Bayesian algorithm for APS-U nonlinear dynamics tuning”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM102, unpublished.
[n] M. A. Green et al., “Progress on the MuCOOL and MICE Coupling Coils”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP069, pp. 289-291.
[n] B. D. O, L. Faillace, A. Fukasawa, J. T. Moody, P. Musumeci, and J. B. Rosenzweig, “Development of a 1.5+0.5 Cell Photoinjector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP094, pp. 4758-4760.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Wehrli, M. B?Âge, J. Krempasky, and E. D. van Garderen, “Properties of X-ray Beam Position Monitors at the Swiss Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC139, pp. 3312-3314.
- D. B. Dobson, A. J. Churby, and E. K. Krieger, “Managing a Product Called NIF - PLM Current State and Processes”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC090, pp. 310-313.
- A. Sytov et al., “Full simulation model of crystal-based extraction from an accelerator using BDSim and Geant4 G4ChannelingFastSimModel”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS124, this conference.
- D. H. Han, Y. S. Kim, and M. Kwon, “Coupling Impedance Measurement of Pohang Light Source Storage Ring Vacuum Components”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP100G, pp. 1093-1095.
- T. Tajima, H. Miwa, Co. Ltd, and H. Ohta, “Evaluation of Dust Particles in the KEK Clean Room and Cleaning Methods Used for SC Cavity Assembly”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I38, pp. XX-XX.
- V. S. Klenov, Yu. V. Kiselev, O. Volodkevich, and V. Zubets, “Development of Remote Control System for H-minus Ions Source of INR LINAC”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC44, pp. 423-425.
- Y. Li and J. Pflueger, “Undulator Phase Matching for the the European XFEL”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 103-107.
- A. Gilmour, W. R. Araujo, and J. M. Polli, “Thermo-Mechanical Aspects of the MOBIPIX, a Compact X-Ray Imaging System with Embedded GPU”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 223-226.
- G. Arduini et al., “LEP Operation and Performance with 100 GeV Colliding Beams”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUOBF101, pp. 265-267.
- G. B. Bowden et al., “Microwave Cold-Testing Techniques for the NLC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP085L, pp. 2056-2058.
- H. Sakai et al., “Stable Beam Operation in Compact ERL for Medical and Industrial Application at KEK”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 714.
- J. B. Flanz, “OPERATION OF A CYCLOTRON BASED PROTON THERAPY FACILITY”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19B1, pp. XX-XX.
- H. Soltner, U. Bechstedt, J. G. De Villiers, and R. T?Âlle, “Magnetic-Field Calculations for the Magnets of the High-Energy Storage Ring (HESR) at FAIR”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP016, pp. 166-168.
- T. J. Zhang, C. J. Chu, G. F. Song, S. M. Wei, J. J. Yang, and J. Q. Zhong, “Correction Coil System for Compact High Intensity Cyclotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP012, pp. 157-159.
- P. A. Piminov et al., “Study of Beam Dynamics during the Crossing of the Third-Order Resonance at VEPP-4M”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3PBI02, pp. 1894-1898.
- N. Kuklev, M. Borland, L. Emery, Y. Hidaka, H. Shang, and Y. Sun, “High efficiency multi-objective Bayesian algorithm for APS-U nonlinear dynamics tuning”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM102, this conference.
- M. A. Green et al., “Progress on the MuCOOL and MICE Coupling Coils”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP069, pp. 289-291.
- B. D. O, L. Faillace, A. Fukasawa, J. T. Moody, P. Musumeci, and J. B. Rosenzweig, “Development of a 1.5+0.5 Cell Photoinjector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP094, pp. 4758-4760.
Back to search