Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Suzuki et al., “Development of 5-Cell rf Cavity for SPring-8 Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 707-710.
[n] M. Felber et al., “Upgrade of the Optical Synchronization System for FLASH II”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA14, pp. 496-498.
[n] Z. B. Li, W. Fang, Q. Gu, X. X. Huang, J. H. Tan, and Z. T. Zhao, “High Power Test of the First C-band Spherical Pulse Compressor Prototype”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2896-2898. doi:10.18429/JACoW-IPAC2019-WEPRB042
[n] N. Nakamura et al., “Phase Shifter Prototype with Laminated Permalloy Yokes for a Polarization-Controlled Undulator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP090, pp. 342-344.
[n] M. Nabinger et al., “Terahertz streaking detection for longitudinal bunch diagnostics at FLUTE”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM064, unpublished.
[n] J. Kamiya, Y. Hikichi, K. Kanazawa, M. Kinsho, N. Ogiwara, and Y. Takiyama, “Vacuum Status during the Beam Operation of RCS in J-PARC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP016, pp. 384-386.
[n] R. Cizeron et al., “Experimental Determination of the Characteristics of a Positron Source Using Channeling (*)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB21, pp. 143-145.
[n] J. I. M. Botman, H. L. Hagedoorn, J. Reich, and P. Wucherer, “Analytical Treatment of Ion Inflectors”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-12, pp. 263-266.
[n] W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1593-1598.
[n] R. Gebel, “NEGATIVE ION SOURCES AT THE INJECTOR CYCLOTRON FOR THE COOLER SYNCHROTRON COSY/J?£LICH”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P16, pp. XX-XX.
[n] D. G. Myakishev and B. N. Sukhina, “Calcultion of the Gun and Collector for Electron Cooling System EX35 and EX300”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2B03, pp. 1384-1386.
[n] B. C. Brown et al., “Fermilab Recycler Collimation System Design”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 726-728. doi:10.18429/JACoW-NAPAC2016-WEPOA16
[n] M. Syha, U. Ratzinger, and M. Schuett, “Beam Dynamics for the FAIR p-Linac Ladder RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 522-524. doi:10.18429/JACoW-LINAC2018-TUPO083
[n] M. S. Champion et al., “Progress on the Proton Power Upgrade at the Spallation Neutron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1876-1879. doi:10.18429/JACoW-IPAC2021-TUPAB199
[n] T. Wehrli, M. B?Âge, J. Krempasky, and E. D. van Garderen, “Properties of X-ray Beam Position Monitors at the Swiss Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC139, pp. 3312-3314.
[n] A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974.
[n] S. Zhao et al., “Development of Intense Beam Proton Linac in China”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP14, pp. 63-65.
[n] Yu. K. Alekseev, S. V. Abramov, A. M. Gorokhov, V. I. Shvedunov, A. A. Vetrov, and D. A. Zayarniy, “Electron Micro-Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH147, pp. 4017-4019.
[n] R. Nagaoka, M. Hara, H. Tanaka, K. Tsumaki, and K. Yoshida, “Effect of Insertion Devices on Beam Dynamics of the 8 GeV Light Source Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1361-1364.
[n] T. J. Zhang, C. J. Chu, G. F. Song, S. M. Wei, J. J. Yang, and J. Q. Zhong, “Correction Coil System for Compact High Intensity Cyclotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP012, pp. 157-159.
[n] S. Adam and M. Humbel, “Integration of Compute-Bound Tasks in the SIN Control System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-04, pp. 418-421.
[n] R. Littauer and H. Pfeffer, “The Multiplex Control System for the Cornell 10 - GeV Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1050-1053.
[n] Y. T. Yang, K. Fan, J. J. Li, and Y. Song, “Study on Spherical Aberration Correction of Solenoid Lens in Ultrafast Electron Diffraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 213-216. doi:10.18429/JACoW-IPAC2019-MOPGW054
[n] T. J. Zhang et al., “Imperfection Investigation for the Main Magnet Construction for Compact Cyclotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP011, pp. 154-156.
[n] M. Champion et al., “Progress towards the completion of the proton power upgrade project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1691-1694. doi:10.18429/JACoW-IPAC2024-TUPS27
For LaTeX
Use Complete Form
For BibTeX
References
- H. Suzuki et al., “Development of 5-Cell rf Cavity for SPring-8 Booster Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 707-710.
- M. Felber et al., “Upgrade of the Optical Synchronization System for FLASH II”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA14, pp. 496-498.
- Z. B. Li, W. Fang, Q. Gu, X. X. Huang, J. H. Tan, and Z. T. Zhao, “High Power Test of the First C-band Spherical Pulse Compressor Prototype”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2896-2898.
- N. Nakamura et al., “Phase Shifter Prototype with Laminated Permalloy Yokes for a Polarization-Controlled Undulator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP090, pp. 342-344.
- M. Nabinger et al., “Terahertz streaking detection for longitudinal bunch diagnostics at FLUTE”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM064, this conference.
- J. Kamiya, Y. Hikichi, K. Kanazawa, M. Kinsho, N. Ogiwara, and Y. Takiyama, “Vacuum Status during the Beam Operation of RCS in J-PARC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP016, pp. 384-386.
- R. Cizeron et al., “Experimental Determination of the Characteristics of a Positron Source Using Channeling (*)”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOB21, pp. 143-145.
- J. I. M. Botman, H. L. Hagedoorn, J. Reich, and P. Wucherer, “Analytical Treatment of Ion Inflectors”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper G-12, pp. 263-266.
- W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1593-1598.
- R. Gebel, “NEGATIVE ION SOURCES AT THE INJECTOR CYCLOTRON FOR THE COOLER SYNCHROTRON COSY/J?£LICH”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P16, pp. XX-XX.
- D. G. Myakishev and B. N. Sukhina, “Calcultion of the Gun and Collector for Electron Cooling System EX35 and EX300”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2B03, pp. 1384-1386.
- B. C. Brown et al., “Fermilab Recycler Collimation System Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 726-728.
- M. Syha, U. Ratzinger, and M. Schuett, “Beam Dynamics for the FAIR p-Linac Ladder RFQ”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 522-524.
- M. S. Champion et al., “Progress on the Proton Power Upgrade at the Spallation Neutron Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1876-1879.
- T. Wehrli, M. B?Âge, J. Krempasky, and E. D. van Garderen, “Properties of X-ray Beam Position Monitors at the Swiss Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC139, pp. 3312-3314.
- A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974.
- S. Zhao et al., “Development of Intense Beam Proton Linac in China”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP14, pp. 63-65.
- Yu. K. Alekseev, S. V. Abramov, A. M. Gorokhov, V. I. Shvedunov, A. A. Vetrov, and D. A. Zayarniy, “Electron Micro-Accelerator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH147, pp. 4017-4019.
- R. Nagaoka, M. Hara, H. Tanaka, K. Tsumaki, and K. Yoshida, “Effect of Insertion Devices on Beam Dynamics of the 8 GeV Light Source Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1361-1364.
- T. J. Zhang, C. J. Chu, G. F. Song, S. M. Wei, J. J. Yang, and J. Q. Zhong, “Correction Coil System for Compact High Intensity Cyclotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP012, pp. 157-159.
- S. Adam and M. Humbel, “Integration of Compute-Bound Tasks in the SIN Control System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-04, pp. 418-421.
- R. Littauer and H. Pfeffer, “The Multiplex Control System for the Cornell 10 - GeV Synchrotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1050-1053.
- Y. T. Yang, K. Fan, J. J. Li, and Y. Song, “Study on Spherical Aberration Correction of Solenoid Lens in Ultrafast Electron Diffraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 213-216.
- T. J. Zhang et al., “Imperfection Investigation for the Main Magnet Construction for Compact Cyclotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP011, pp. 154-156.
- M. Champion et al., “Progress towards the completion of the proton power upgrade project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS27, pp. 1691-1694.
Back to search