Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. S. Chernousko, A. Gonias, M. T. Heron, T. Korhonen, E. Pietarinen, and J. Pietarinen, “The Timing System for Diamond Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH166, pp. 3182-3184.
[n] P. S. Miller, “Invited Paper: The MSU Superconducting Cyclotron Program”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper A03, pp. 11-19.
[n] T. T. Arkan et al., “LCLS-II Cryomodules Production Experience and Lessons Learned Towards LCLS-II-HE Project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 832. doi:10.18429/JACoW-SRF2021-THPTEV003
[n] S. Y. Lee and X. F. Zhao, “Spin with Two Snakes and Overlapping Resonances”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1185-1188.
[n] K. Saito et al., “Behavior of Electropolished Niobium Cavities Under Different Cooldown Conditions”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F04, pp. XX-XX.
[n] J. A. Carter, “3D Numerical Ray Tracing for the APS-Upgrade Storage Ring Vacuum System Design”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 312-315. doi:10.18429/JACoW-MEDSI2018-THOAMA05
[n] K. Kawase et al., “High Power Operation of the THz FEL at ISIR, Osaka University”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP073, pp. 528-531.
[n] K. Koba et al., “Longitudinal Impedance Tuner Using High Permeability Material”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D026, pp. 450-452.
[n] J. Chen, L. W. Lai, Y. B. Leng, T. Wu, and R. X. Yuan, “A Beam Based Method to Optimize the SBPM System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4780-4783. doi:10.18429/JACoW-IPAC2018-THPML062
[n] M. Kastriotou, E. B. Holzer, E. Nebot Del Busto, M. J. Boland, and C. P. Welsch, “An Optical Fibre BLM System at the Australian Synchrotron Light Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 669-672. doi:10.18429/JACoW-IBIC2016-WEPG20
[n] A. F. Hartin et al., “Simulation of ILC Feedback BPM Signals in an Intense Background Environment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN079, pp. 2889-2891.
[n] H. J. Zeng et al., “Magnetic Field Tolerances of Dipole and Quadrupole Magnets for XiPAF Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3551-3553. doi:10.18429/JACoW-IPAC2018-THPAK133
[n] A. Sharma et al., “Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at BARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP007, pp. 456-458.
[n] G. Günther et al., “IR of FAIR - Principles at the Instrument Level”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1046-1050. doi:10.18429/JACoW-ICALEPCS2023-WE3BCO09
[n] S. Kashiwagi et al., “Development of a Photocathode RF Gun for an L-Band Electron Linac”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC20, pp. 289-292.
[n] Y. Gao et al., “Bayesian optimization calibration of ionization profile monitor at the AGS complex”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4444-4447. doi:10.18429/JACoW-IPAC2023-THPL012
[n] A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Simulation of Proton Beam Behaviour in High Energy Linac with Few-Gaps Resonators at Failure of One or Some of Them”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B02, pp. 830-832.
[n] J. K. Pozimski, S. M. H. Alsari, P. Savage, D. C. Faircloth, and A. P. Letchford, “Investigation of Space Charge Compensation at FETS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA042, pp. 3723-3725.
[n] N. P. Sobenin et al., “Stabilization of the Polarization Plane in Traveling Wave Deflectors”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA036, pp. 3759-3761.
[n] G. A. Westenskow, F. M. Bieniosek, D. P. Grote, and J. W. Kwan, “A Multi-beamlet Injector for Heavy Ion Fusion: Experiments and Modeling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRYAB01, pp. 3777-3781.
[n] A. Van Ginneken and T. Borak, “Beamstop Experiment at 29.4 GeV”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 746-748.
[n] M. Hostettler et al., “Comparison of Transverse Emittance Measurements in the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 377-380. doi:10.18429/JACoW-IPAC2017-MOPAB110
[n] H. Liu, J. Yan, J.-J. Guo, S. Chen, and H. Deng, “Wakefield and skin depth issues in the kicker at the SHINE”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL082, unpublished.
[n] N. A. Towne, H. Ma, and J. Rose, “Linear-Quadratic-Gaussian Controllers for Single-Frequency RF Systems and Short Bunches in NSLS-II”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP068, pp. 2162-2164.
[n] D. W. Storm et al., “Operation Status of the Nevis Synchrocyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1634-1637.
[n] P. Jain, D. P. Chakravarthy, A. K. Ray, and P. Roychowdhury, “Inhomogenous Field Wien Filter Design”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA014, pp. 354-356.
[n] M. Rosing and W. Gai, “The Transverse Forces in Wakefield Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 243-246.
[n] J. K. Boyd, G. J. Caporaso, A. G. Cole, and J. T. Weir, “Beam Quality of the ATA Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 925-928.
[n] F. E. Johnson, R. A. Maraschin, C. Meyer-Boricke, J. Reich, and C. T. Rockhold, “Iterative Procedure for Fringe Field Shaping with Laminated Pole Caps”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 890-892.
[n] L. G. Lewis and A. Brescia, “A Torsional Strain and Vibration Monitor for the Motor-Generator Shaft of the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 379-382.
[n] G. A. Westenskow, “Scaling the TBNLC Collider Design to Higher Frequencies”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP30, pp. 396-398.
[n] C. L. Fink et al., “NPBTS-Overview and Capabilities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 295-298.
[n] E. A. Heighway, “Movable Steel Trim Rods and the Orbit Dynamics of the Chalk River Superconducting Heavy Ion Cyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1479-1482.
[n] S. Xiong, Y. Tan, W. Man, and Y. Yang, “PLC- and SCADA-based Equipment Protection Systems for the New Beamlines at BSRF”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP516, pp. XX-XX.
[n] N. N. Alexeev et al., “ITEP Proton Synchrotron Reconstruction”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1728-1731.
[n] J. X. Zhang, X. J. Bian, F. S. Chen, J. Cheng, and F. Long, “Study of Digital Quench Detection System Based on System-on-Chip Technology”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3549-3551. doi:10.18429/JACoW-IPAC2016-THPMW008
[n] J. N. Blowers, R. Hanft, D. J. Harding, J. A. John, and W. F. Robotham, “Reshimming of Tevatron Dipoles; A Process-Quality and Lessons-Learned Perspective”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT051, pp. 3156-3158.
[n] J. Nakano et al., “150 MeV Fixed Field Alternating Gradient Accelerator and Return-yoke Free Magnet”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE004, pp. 1028-1030.
[n] Y. Li et al., “CesrTA Vacuum System Modifications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP005, pp. 357-359.
[n] Y. W. Kang, S. L. Meyer, A. Roberts, and D. Theriot, “Muon Shielding for a 500-GeV Neutrino Facility”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 753-755.
[n] W. P. Lysenko et al., “Characterizing Proton Beam of 6.7 MeV LEDA RFQ by Fitting Wire-Scanner Profiles to 3-D Nonlinear Simulations”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH089, pp. 3051-3053.
[n] N. Karastathis, K. Fuchsberger, M. Hostettler, Y. Papaphilippou, and D. Pellegrini, “Crossing Angle Anti-Leveling at the LHC in 2017”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 184-187. doi:10.18429/JACoW-IPAC2018-MOPMF040
For LaTeX
Use Complete Form
For BibTeX
References
- Y. S. Chernousko, A. Gonias, M. T. Heron, T. Korhonen, E. Pietarinen, and J. Pietarinen, “The Timing System for Diamond Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH166, pp. 3182-3184.
- P. S. Miller, “Invited Paper: The MSU Superconducting Cyclotron Program”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper A03, pp. 11-19.
- T. T. Arkan et al., “LCLS-II Cryomodules Production Experience and Lessons Learned Towards LCLS-II-HE Project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 832.
- S. Y. Lee and X. F. Zhao, “Spin with Two Snakes and Overlapping Resonances”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1185-1188.
- K. Saito et al., “Behavior of Electropolished Niobium Cavities Under Different Cooldown Conditions”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F04, pp. XX-XX.
- J. A. Carter, “3D Numerical Ray Tracing for the APS-Upgrade Storage Ring Vacuum System Design”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 312-315.
- K. Kawase et al., “High Power Operation of the THz FEL at ISIR, Osaka University”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP073, pp. 528-531.
- K. Koba et al., “Longitudinal Impedance Tuner Using High Permeability Material”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D026, pp. 450-452.
- J. Chen, L. W. Lai, Y. B. Leng, T. Wu, and R. X. Yuan, “A Beam Based Method to Optimize the SBPM System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4780-4783.
- M. Kastriotou, E. B. Holzer, E. Nebot Del Busto, M. J. Boland, and C. P. Welsch, “An Optical Fibre BLM System at the Australian Synchrotron Light Source”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 669-672.
- A. F. Hartin et al., “Simulation of ILC Feedback BPM Signals in an Intense Background Environment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN079, pp. 2889-2891.
- H. J. Zeng et al., “Magnetic Field Tolerances of Dipole and Quadrupole Magnets for XiPAF Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3551-3553.
- A. Sharma et al., “Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at BARC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP007, pp. 456-458.
- G. Günther et al., “IR of FAIR - Principles at the Instrument Level”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE3BCO09, pp. 1046-1050.
- S. Kashiwagi et al., “Development of a Photocathode RF Gun for an L-Band Electron Linac”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC20, pp. 289-292.
- Y. Gao et al., “Bayesian optimization calibration of ionization profile monitor at the AGS complex”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL012, pp. 4444-4447.
- A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Simulation of Proton Beam Behaviour in High Energy Linac with Few-Gaps Resonators at Failure of One or Some of Them”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B02, pp. 830-832.
- J. K. Pozimski, S. M. H. Alsari, P. Savage, D. C. Faircloth, and A. P. Letchford, “Investigation of Space Charge Compensation at FETS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA042, pp. 3723-3725.
- N. P. Sobenin et al., “Stabilization of the Polarization Plane in Traveling Wave Deflectors”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA036, pp. 3759-3761.
- G. A. Westenskow, F. M. Bieniosek, D. P. Grote, and J. W. Kwan, “A Multi-beamlet Injector for Heavy Ion Fusion: Experiments and Modeling”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRYAB01, pp. 3777-3781.
- A. Van Ginneken and T. Borak, “Beamstop Experiment at 29.4 GeV”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 746-748.
- M. Hostettler et al., “Comparison of Transverse Emittance Measurements in the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 377-380.
- H. Liu, J. Yan, J.-J. Guo, S. Chen, and H. Deng, “Wakefield and skin depth issues in the kicker at the SHINE”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL082, unpublished.
- N. A. Towne, H. Ma, and J. Rose, “Linear-Quadratic-Gaussian Controllers for Single-Frequency RF Systems and Short Bunches in NSLS-II”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP068, pp. 2162-2164.
- D. W. Storm et al., “Operation Status of the Nevis Synchrocyclotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1634-1637.
- P. Jain, D. P. Chakravarthy, A. K. Ray, and P. Roychowdhury, “Inhomogenous Field Wien Filter Design”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA014, pp. 354-356.
- M. Rosing and W. Gai, “The Transverse Forces in Wakefield Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 243-246.
- J. K. Boyd, G. J. Caporaso, A. G. Cole, and J. T. Weir, “Beam Quality of the ATA Injector”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 925-928.
- F. E. Johnson, R. A. Maraschin, C. Meyer-Boricke, J. Reich, and C. T. Rockhold, “Iterative Procedure for Fringe Field Shaping with Laminated Pole Caps”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 890-892.
- L. G. Lewis and A. Brescia, “A Torsional Strain and Vibration Monitor for the Motor-Generator Shaft of the Zero Gradient Synchrotron (ZGS)”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 379-382.
- G. A. Westenskow, “Scaling the TBNLC Collider Design to Higher Frequencies”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP30, pp. 396-398.
- C. L. Fink et al., “NPBTS-Overview and Capabilities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 295-298.
- E. A. Heighway, “Movable Steel Trim Rods and the Orbit Dynamics of the Chalk River Superconducting Heavy Ion Cyclotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1479-1482.
- S. Xiong, Y. Tan, W. Man, and Y. Yang, “PLC- and SCADA-based Equipment Protection Systems for the New Beamlines at BSRF”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP516, pp. XX-XX.
- N. N. Alexeev et al., “ITEP Proton Synchrotron Reconstruction”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1728-1731.
- J. X. Zhang, X. J. Bian, F. S. Chen, J. Cheng, and F. Long, “Study of Digital Quench Detection System Based on System-on-Chip Technology”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3549-3551.
- J. N. Blowers, R. Hanft, D. J. Harding, J. A. John, and W. F. Robotham, “Reshimming of Tevatron Dipoles; A Process-Quality and Lessons-Learned Perspective”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT051, pp. 3156-3158.
- J. Nakano et al., “150 MeV Fixed Field Alternating Gradient Accelerator and Return-yoke Free Magnet”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE004, pp. 1028-1030.
- Y. Li et al., “CesrTA Vacuum System Modifications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP005, pp. 357-359.
- Y. W. Kang, S. L. Meyer, A. Roberts, and D. Theriot, “Muon Shielding for a 500-GeV Neutrino Facility”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 753-755.
- W. P. Lysenko et al., “Characterizing Proton Beam of 6.7 MeV LEDA RFQ by Fitting Wire-Scanner Profiles to 3-D Nonlinear Simulations”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH089, pp. 3051-3053.
- N. Karastathis, K. Fuchsberger, M. Hostettler, Y. Papaphilippou, and D. Pellegrini, “Crossing Angle Anti-Leveling at the LHC in 2017”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 184-187.
Back to search