Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Gerhan et al., “Studies of Niobium Thin Films Deposited by Coaxial Energetic Deposition”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP61, pp. 384-384.
[n] R. E. Laxdal et al., “Extraction Exploiting nu;r = 3/2: Optical and Technical Constraints on Performance”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-08, pp. 248-251.
[n] C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2561-2564. doi:10.18429/JACoW-IPAC2016-WEPMY009
[n] M. G. Fedurin, Y. C. Jing, D. Stratakis, and C. Swinson, “BNL ATF II Beamlines Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1445-1447. doi:10.18429/JACoW-IPAC2015-TUPWA020
[n] H. Wang, T. E. Plawski, R. A. Rimmer, A. Dudas, and M. L. Neubauer, “Simulation and Experimental Studies of a 2.45GHz Magnetron Source for an SRF Cavity with Field Amplitude and Phase Controls”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 514-517. doi:10.18429/JACoW-IPAC2016-MOPMY002
[n] R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
[n] G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896.
[n] D. B. Dobson, A. J. Churby, and E. K. Krieger, “Managing a Product Called NIF - PLM Current State and Processes”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC090, pp. 310-313.
[n] S. M. Reisdorf and D. A. Potter, “NIF Electronic Operations: Improving Productivity with iPad Application Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB07, pp. 1066-1069.
[n] E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
[n] F. Bulos et al., “Some Fast Beam Kicker Magnet Systems at SLAC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1884-1887.
[n] A. R. Donaldson, “Modulator Reliability and Bandwidth Improvement: Replacing Tetrodes with MOSFETs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H09, pp. 284-286.
[n] B. Kalantari and T. Korhonen, “Beam Synchronous Data Acquisition for SwissFEL Test Injector”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS011, pp. 180-182.
[n] V. V. Peplov, D. E. Anderson, R. I. Cutler, M. Wezensky, J. D. Hicks, and R. B. Saethre, “SNS Linac Modulator Operational History and Performance”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP275, pp. 1340-1342.
[n] Z. A. Conway, K. W. Shepard, M. P. Kelly, J. D. Fuerst, and M. Kedzie, “Mechanical Properties of Spoke Resonators”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA06, pp. 185-187.
[n] G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 56-59. doi:10.18429/JACoW-ICALEPCS2015-MOD3O03
[n] R. L. Witkover, D. S. Barton, and R. K. Reece, “Conversion of the AGS Linac to H- Acceleration”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3010-3013.
[n] P. Reinhardt-Nikulin, S. Bragin, and N. Ilinsky, “Method of Longitudinal Impedance Measurement for Accelerator Elements in Wide Frequency Region Using Double Fourier Transform”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1014-1017.
[n] W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
[n] W. Fu, J. Morris, and S. Nemesure, “Asynchronous Data Change Notification between Database Server and Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN021, pp. 144-146.
[n] R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669.
[n] E. R. Beadle, G. W. Bennett, and R. L. Witkover, “The AGS Booster Beam Loss Monitor System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1231-1234.
[n] R. Baartman, K. R. Kendall, M. McDonald, P. W. Schmor, and D. Yuan, “An Intense Ion Source for H- Cyclotrons”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 283-286.
[n] D. Sun, F. R. Huson, and W. W. MacKay, “Voltage Breakdown Test at 473 MHz”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO460, pp. 216-218.
[n] L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
[n] G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 118-121. doi:10.18429/JACoW-FEL2019-TUP032
[n] M. Turner et al., “Compact Ring-Based X-Ray Source With on-Orbit and on-Energy Laser-Plasma Injection”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 435-438. doi:10.18429/JACoW-NAPAC2016-TUA3CO03
[n] R. Kapeller, C. E. Higgs, R. A. Krempaska, and H. Lutz, “From Real to Virtual - How to Provide a High-avaliblity Computer Server Infrastructure”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THMIB03, pp. 1076-1078.
[n] J. D. Fuerst, W. F. Toter, and K. W. Shepard, “Niobium to Stainless Steel Braze Transition Development”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP11, pp. 305-307.
[n] E. Marin et al., “Status of the ATF2 Lattices”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC016, pp. 1027-1029.
[n] R. Laxdal, M. K. Craddock, W. Joho, G. H. Mackenzie, J. R. Richardson, and L. C. Teng, “Matching an Ischoronous Cyclotron to a Synchrotron to Provide a High Intensity Injector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2013-2016.
[n] W. X. Cheng et al., “Experimental Study of Single Bunch Instabilities at NSLS-II Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1738-1740. doi:10.18429/JACoW-IPAC2016-TUPOR033
[n] A. Halavanau and P. Piot, “Numerical Study of Three Dimensional Effects in Longitudinal Space-Charge Impedance”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1853-1855. doi:10.18429/JACoW-IPAC2015-TUPMA008
[n] C. Wilkinson et al., “Comparison of Beam Transport Simulations to Measurements at the Los Alamos Proton Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W022, pp. 1015-1017.
[n] J. Pfingstner, E. Adli, C. A. Lindstrom, E. Marin, and D. Schulte, “Considerations for a Drive Beam Scheme for a Plasma Wakefield Linear Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2565-2568. doi:10.18429/JACoW-IPAC2016-WEPMY010
[n] M. L. Neubauer, A. Dudas, R. Sah, A. Moretti, and M. Popovic, “Phase and Frequency Locked Magnetron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC065, pp. 3440-3442.
[n] V. Ptitsin and Yu. Shatunov, “Siberian Snakes for Electron Storage Rings”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P022, pp. 3500-3502.
[n] S. M. Reisdorf, B. A. Conrad, D. A. Potter, and P. D. Reisdorf, “Rapid Application Development Using Web 2.0 Technologies”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB05, pp. 1058-1061.
[n] R. Baartman, R. Laxdal, R. Lee, and G. H. Mackenzie, “Beam Optics for a 12-GeV Isochronous Ring Cyclotron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2010-2013.
[n] J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
[n] D. Cline et al., “High Energy Electron Beam Cooling to Improve the Luminosity and Lifetime in Colliding Beam Machines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3472-3476.
[n] S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA002, pp. 6-9.
[n] G. Lawler, J. Parsons, and J. Rosenzweig, “Cryogenic Testing Infrastucture at UCLA”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM098, unpublished.
[n] X. Buffat, G. J. Müller, S. Redaelli, and M. Strzelczyk, “Simulation of Linear Beam Parameters to Minimize the Duration of the Squeeze at the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ030, pp. 1873-1875.
[n] L. Monaco, G. Guerini Rocco, P. Michelato, C. Pagani, and D. Sertore, “Growing and Characterization of Cs2Te Photocatodes with Different Thicknesses at INFN LASA”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 297-300. doi:10.18429/JACoW-FEL2019-WEA04
For LaTeX
Use Complete Form
For BibTeX
References
- A. Gerhan et al., “Studies of Niobium Thin Films Deposited by Coaxial Energetic Deposition”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP61, pp. 384-384.
- R. E. Laxdal et al., “Extraction Exploiting nu;r = 3/2: Optical and Technical Constraints on Performance”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper G-08, pp. 248-251.
- C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2561-2564.
- M. G. Fedurin, Y. C. Jing, D. Stratakis, and C. Swinson, “BNL ATF II Beamlines Design”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1445-1447.
- H. Wang, T. E. Plawski, R. A. Rimmer, A. Dudas, and M. L. Neubauer, “Simulation and Experimental Studies of a 2.45GHz Magnetron Source for an SRF Cavity with Field Amplitude and Phase Controls”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 514-517.
- R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
- G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896.
- D. B. Dobson, A. J. Churby, and E. K. Krieger, “Managing a Product Called NIF - PLM Current State and Processes”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC090, pp. 310-313.
- S. M. Reisdorf and D. A. Potter, “NIF Electronic Operations: Improving Productivity with iPad Application Development”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB07, pp. 1066-1069.
- E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
- F. Bulos et al., “Some Fast Beam Kicker Magnet Systems at SLAC”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1884-1887.
- A. R. Donaldson, “Modulator Reliability and Bandwidth Improvement: Replacing Tetrodes with MOSFETs”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H09, pp. 284-286.
- B. Kalantari and T. Korhonen, “Beam Synchronous Data Acquisition for SwissFEL Test Injector”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS011, pp. 180-182.
- V. V. Peplov, D. E. Anderson, R. I. Cutler, M. Wezensky, J. D. Hicks, and R. B. Saethre, “SNS Linac Modulator Operational History and Performance”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP275, pp. 1340-1342.
- Z. A. Conway, K. W. Shepard, M. P. Kelly, J. D. Fuerst, and M. Kedzie, “Mechanical Properties of Spoke Resonators”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA06, pp. 185-187.
- G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 56-59.
- R. L. Witkover, D. S. Barton, and R. K. Reece, “Conversion of the AGS Linac to H- Acceleration”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3010-3013.
- P. Reinhardt-Nikulin, S. Bragin, and N. Ilinsky, “Method of Longitudinal Impedance Measurement for Accelerator Elements in Wide Frequency Region Using Double Fourier Transform”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1014-1017.
- W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
- W. Fu, J. Morris, and S. Nemesure, “Asynchronous Data Change Notification between Database Server and Accelerator Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN021, pp. 144-146.
- R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1666-1669.
- E. R. Beadle, G. W. Bennett, and R. L. Witkover, “The AGS Booster Beam Loss Monitor System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1231-1234.
- R. Baartman, K. R. Kendall, M. McDonald, P. W. Schmor, and D. Yuan, “An Intense Ion Source for H- Cyclotrons”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 283-286.
- D. Sun, F. R. Huson, and W. W. MacKay, “Voltage Breakdown Test at 473 MHz”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO460, pp. 216-218.
- L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
- G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 118-121.
- M. Turner et al., “Compact Ring-Based X-Ray Source With on-Orbit and on-Energy Laser-Plasma Injection”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 435-438.
- R. Kapeller, C. E. Higgs, R. A. Krempaska, and H. Lutz, “From Real to Virtual - How to Provide a High-avaliblity Computer Server Infrastructure”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THMIB03, pp. 1076-1078.
- J. D. Fuerst, W. F. Toter, and K. W. Shepard, “Niobium to Stainless Steel Braze Transition Development”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP11, pp. 305-307.
- E. Marin et al., “Status of the ATF2 Lattices”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC016, pp. 1027-1029.
- R. Laxdal, M. K. Craddock, W. Joho, G. H. Mackenzie, J. R. Richardson, and L. C. Teng, “Matching an Ischoronous Cyclotron to a Synchrotron to Provide a High Intensity Injector”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2013-2016.
- W. X. Cheng et al., “Experimental Study of Single Bunch Instabilities at NSLS-II Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1738-1740.
- A. Halavanau and P. Piot, “Numerical Study of Three Dimensional Effects in Longitudinal Space-Charge Impedance”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1853-1855.
- C. Wilkinson et al., “Comparison of Beam Transport Simulations to Measurements at the Los Alamos Proton Storage Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W022, pp. 1015-1017.
- J. Pfingstner, E. Adli, C. A. Lindstrom, E. Marin, and D. Schulte, “Considerations for a Drive Beam Scheme for a Plasma Wakefield Linear Collider”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2565-2568.
- M. L. Neubauer, A. Dudas, R. Sah, A. Moretti, and M. Popovic, “Phase and Frequency Locked Magnetron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC065, pp. 3440-3442.
- V. Ptitsin and Yu. Shatunov, “Siberian Snakes for Electron Storage Rings”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P022, pp. 3500-3502.
- S. M. Reisdorf, B. A. Conrad, D. A. Potter, and P. D. Reisdorf, “Rapid Application Development Using Web 2.0 Technologies”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB05, pp. 1058-1061.
- R. Baartman, R. Laxdal, R. Lee, and G. H. Mackenzie, “Beam Optics for a 12-GeV Isochronous Ring Cyclotron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2010-2013.
- J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
- D. Cline et al., “High Energy Electron Beam Cooling to Improve the Luminosity and Lifetime in Colliding Beam Machines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3472-3476.
- S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA002, pp. 6-9.
- G. Lawler, J. Parsons, and J. Rosenzweig, “Cryogenic Testing Infrastucture at UCLA”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM098, unpublished.
- X. Buffat, G. J. Müller, S. Redaelli, and M. Strzelczyk, “Simulation of Linear Beam Parameters to Minimize the Duration of the Squeeze at the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ030, pp. 1873-1875.
- L. Monaco, G. Guerini Rocco, P. Michelato, C. Pagani, and D. Sertore, “Growing and Characterization of Cs2Te Photocatodes with Different Thicknesses at INFN LASA”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 297-300.
Back to search