Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Pichoff et al., “The SARAF-LINAC Project 2017 Status”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2194-2196. doi:10.18429/JACoW-IPAC2017-TUPVA052
[n] A. B. Sefkow et al., “A Fast Faraday Cup for the Neutralized Drift Compression Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT068, pp. 3765-3767.
[n] D. Reggiani, P.-A. Duperrex, R. D?Âlling, D. C. Kiselev, J. Welte, and M. Wohlmuther, “Improving Machine and Target Protection in the SINQ Beam Line at PSI-HIPA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2337-2340. doi:10.18429/JACoW-IPAC2018-WEPAL068
[n] D. Bogert, L. J. Chapman, R. J. Ducar, and S. L. Segler, “The Tevatron Control System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2204-2207.
[n] J. M. Coello de Portugal, F. S. Carlier, A. Langner, T. Persson, P. K. Skowronski, and R. Tomas, “OMC Software Improvements in 2014”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 426-429. doi:10.18429/JACoW-IPAC2015-MOPJE056
[n] S. Hunziker et al., “Reference Distribution and Synchronization System for SwissFEL: Concept and First Results”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOCZB2, pp. 29-33.
[n] L. Praestegaard et al., “Investigation of the ANKA Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH082, pp. 2284-2286.
[n] I. Itoh, K. Saito, H. Inoue, and W. Singer, “Hot Roll Bonding Method for Nb/Cu Clad Seamless SC Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP40, pp. 412-417.
[n] J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908.
[n] E. Weihreter et al., “Status of the Superconducting Compact Storage Ring Cosy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 237-240.
[n] N. Ueda, Y. Hirao, A. Mizobuchi, T. Nakanishi, N. Tokuda, and S. Yamada, “Construction of the RFQ TALL""”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3178-3181.
[n] L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516.
[n] G. J. Caporaso et al., “High Gradient Induction Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUYC02, pp. 857-861.
[n] K. Klopfer, W. Ackermann, and T. Weiland, “Eigenmode Computation for Ferrite-Loaded Cavity Resonators”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THACC2, pp. 250-252.
[n] R. Witkover, E. Zitvogel, and R. Michnoff, “RHIC Beam Loss Monitor System Design”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P067, pp. 2218-2220.
[n] G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
[n] X. Yang, K. Ha, V. V. Smaluk, Y. Tian, and L. Yu, “Multi-frequency AC LOCO: A Fast and Precise Technique for Lattice Correction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 831-834. doi:10.18429/JACoW-IPAC2017-MOPIK125
[n] Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 246-249. doi:10.18429/JACoW-LINAC2018-MOPO119
[n] M. N. Polyanskiy, I. Ben-Zvi, I. Pogorelsky, V. Yakimenko, and Z. Najmudin, “Prospects for Proton Accelerators Driven by the Radiation Pressure from a Sub-PW CO2 Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP154, pp. 379-381.
[n] Z. Shen et al., “High Intensity Ion Beam Extraction System for FECR”, presented at the ECRIS'20, East Lansing, MI, USA, Sep. 2020, paper WEXZO01, unpublished.
[n] S. Lederer et al., “XPS Investigations on Cs2Te Photocathodes of FLASH and PITZ”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP054, pp. 482-484.
[n] J. A. Clarke, H. L. Owen, M. W. Poole, S. L. Smith, and N. G. Wyles, “Prospects for a 4th Generation Light Source for the UK”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA011, pp. 253-255.
[n] A. Roth, F. Frommberger, N. Heurich, W. Hillert, M. Schedler, and R. Zimmermann, “Commissioning of Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC077, pp. 250-252.
[n] A. Schempp et al., “Status of the Frankfurt Zero-Mode Proton RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3536-3539.
[n] J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS21, pp. XX-XX.
[n] A. C. Crawford, V. Kashikhin, A. Makarov, S. Nagaitsev, A. Shemyakin, and V. Vostrikov, “Cooling Section Solenoid for the 5 MeV Fermilab Electron Cooling Project”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3A01, pp. 2447-2449.
[n] C. K. Kuan et al., “Heat Transfer Analysis of a Water-cooled Channel for the TPS Front End Components”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI072, pp. 3466-3468.
[n] C. I. Briegel, R. Neswold, and M. Z. Sliczniak, “A Protocol for Streaming Large Messages with UDP”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 693-696. doi:10.18429/JACoW-ICALEPCS2015-WEPGF002
[n] J. Keil, I. V. Agapov, and R. Brinkmann, “A Lattice for PETRA IV Based on the Combination of Different Arc Cell Designs”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 399-402. doi:10.18429/JACoW-IPAC2021-MOPAB109
[n] J. Nguyen Xuan, B. Copy, and M. Donszelmann, “A C/C++ Build System Based on Maven for the LHC Controls System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS026, pp. 848-851.
[n] J. L. Gonzalez, T. B. Bogey, C. Deplano, and J.-J. Savioz, “Development of a High Dynamic Range Beam Position Measurement System Using Logarithmic Amplifiers for the SPS at CERN”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC18, pp. 89-92.
[n] H. V. Smith, P. Allison, and J. Sherman, “Pulsed H Beams from Penning SPS Sources Equipped with Circular Emitters”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-47, pp. 164-166.
[n] R. Hajima and M. Fujiwara, “Generation of GeV Photons from X-ray Free Electron Laser Oscillators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 751-753. doi:10.18429/JACoW-IPAC2016-MOPOW017
[n] A. Bosotti, D. Corti, C. Pagani, G. Varisco, F. Zibra, and M. Di Giacomo, “High Sensitivity Electronic System for the Phase Probes of the LNS/MILANO Superconducting Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-05, pp. 483-486.
[n] K. Fransson, K. J. Gajewski, M. Jacewicz, M. Jobs, J. M. Y. Ruber, and V. G. Ziemann, “The EPICS Based Control System at the FREIA Laboratory”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1890-1892. doi:10.18429/JACoW-IPAC2017-TUPIK084
[n] G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A model-driven approach for automatic PLC and SCADA code generation”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O5_007.
[n] D. Trbojevic, M. Blaskiewicz, E. D. Courant, and A. A. Garren, “Fixed Field Alternating Gradient Lattice Design without Opposite Bend”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE051, pp. 1199-1201.
[n] S. O. Brauer et al., “Design and Testing of a High Power, Ultra-High Vacuum, Dual-Directional Coupler for the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPE09, pp. 2020-2022.
[n] C. Swain, ?û. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “Improvements on the Modified Nomarski Interferometer for Measurements of Supersonic Gas Jet Density Profiles”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 235-238. doi:10.18429/JACoW-LINAC2022-MOPORI06
[n] A. Lueangaramwong et al., “Numerical Study of Beam Dynamics in PITZ Bunch Compressor”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3285-3288. doi:10.18429/JACoW-IPAC2021-WEPAB274
[n] Q. Z. Xing et al., “CPHS Linac Status at Tsinghua University”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3268-3270. doi:10.18429/JACoW-IPAC2014-THPME023
[n] P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
[n] L. Yang et al., “Low Q Cavity BPM Study for the Beam Position Measurement of Nanosecond Spaced Electron Bunches”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1881-1883. doi:10.18429/JACoW-IPAC2018-WEPAF027
[n] T. Furuya et al., “Superconducting Accelerating Cavity for KEK B-Factory”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F35, pp. 729-733.
[n] K. K. Jain, B. N. Ding, and M. J. Rhee, “Scaling Study of Pseudospark Produced Electron Beam”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1972-1975.
[n] M. G. Atanasov et al., “Upgrade of the TCDQ Diluters for the LHC Beam Dump System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3079-3082. doi:10.18429/JACoW-IPAC2015-WEPMN067
[n] M. Knott, G. Gunderson, F. Lenkszus, and W. McDowell, “Control System Features of the Argonne 6 GeV Synchrotron Light Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2014-2017.
[n] K. Nakamura et al., “Experimental Study of Self-Trapping in Capillary Discharge Guided Laser Wakefield Acceleration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP076, pp. 2973-2975.
[n] D. Banerjee et al., “Studies for the K12 High-Intensity Kaon Beam at CERN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3049-3052. doi:10.18429/JACoW-IPAC2021-WEPAB186
[n] S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
[n] L. Bertolini et al., “Design of the Linear Non-Evaporable Getter Pump for the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P016, pp. 3622-3624.
[n] G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A framework for the production of 23 homogeneous control systems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_042.
[n] M. Yu, D. J. Harding, and G. Velev, “Dipole Corrector Magnets for the LBNE Beam Line”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP152, pp. 1115-1117.
[n] M. T. Rooney, C. J. Densham, and Y. Yamada, “A FEA Study of the Stress Waves Generated in the T2K Beam Window from the Interaction with a High Power Pulsed Proton Beam”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP038, pp. 2875-2877.
[n] M. Galonska et al., “Data Supply of Accelerator Devices - Data Management of Device Process Data at a Medical Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 477-480. doi:10.18429/JACoW-IPAC2018-MOPML033
[n] Q. Ji, S. S. Bulanov, E. Esarey, W. Leemans, T. Schenkel, and S. Steinke, “Design of a Compact ion Beam Transport System for the BELLA Ion Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3391-3393. doi:10.18429/JACoW-IPAC2016-THPMR004
[n] Yu. A. Satov et al., “Development of Injector for ITEP Heavy Ion Synchrotron Based on Laser Plasma Generator”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA020, pp. 86-88.
[n] J. Seeman et al., “Progress of the PEP-II B-Factory”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG015, pp. 2297-2299.
[n] J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
[n] S. Litvinov et al., “The Experimental Storage Ring (ESR) - recent developments”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB014, unpublished.
[n] J. T. M. Lyles et al., “A High Power Test Facility for New 201.25 MHz Power Amplifiers and Components”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC070, pp. 3449-3451.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Pichoff et al., “The SARAF-LINAC Project 2017 Status”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2194-2196.
- A. B. Sefkow et al., “A Fast Faraday Cup for the Neutralized Drift Compression Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT068, pp. 3765-3767.
- D. Reggiani, P.-A. Duperrex, R. D?Âlling, D. C. Kiselev, J. Welte, and M. Wohlmuther, “Improving Machine and Target Protection in the SINQ Beam Line at PSI-HIPA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2337-2340.
- D. Bogert, L. J. Chapman, R. J. Ducar, and S. L. Segler, “The Tevatron Control System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2204-2207.
- J. M. Coello de Portugal, F. S. Carlier, A. Langner, T. Persson, P. K. Skowronski, and R. Tomas, “OMC Software Improvements in 2014”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 426-429.
- S. Hunziker et al., “Reference Distribution and Synchronization System for SwissFEL: Concept and First Results”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOCZB2, pp. 29-33.
- L. Praestegaard et al., “Investigation of the ANKA Injector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH082, pp. 2284-2286.
- I. Itoh, K. Saito, H. Inoue, and W. Singer, “Hot Roll Bonding Method for Nb/Cu Clad Seamless SC Cavity”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP40, pp. 412-417.
- J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908.
- E. Weihreter et al., “Status of the Superconducting Compact Storage Ring Cosy”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 237-240.
- N. Ueda, Y. Hirao, A. Mizobuchi, T. Nakanishi, N. Tokuda, and S. Yamada, “Construction of the RFQ TALL""”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3178-3181.
- L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516.
- G. J. Caporaso et al., “High Gradient Induction Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUYC02, pp. 857-861.
- K. Klopfer, W. Ackermann, and T. Weiland, “Eigenmode Computation for Ferrite-Loaded Cavity Resonators”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper THACC2, pp. 250-252.
- R. Witkover, E. Zitvogel, and R. Michnoff, “RHIC Beam Loss Monitor System Design”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P067, pp. 2218-2220.
- G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
- X. Yang, K. Ha, V. V. Smaluk, Y. Tian, and L. Yu, “Multi-frequency AC LOCO: A Fast and Precise Technique for Lattice Correction”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 831-834.
- Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 246-249.
- M. N. Polyanskiy, I. Ben-Zvi, I. Pogorelsky, V. Yakimenko, and Z. Najmudin, “Prospects for Proton Accelerators Driven by the Radiation Pressure from a Sub-PW CO2 Laser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP154, pp. 379-381.
- Z. Shen et al., “High Intensity Ion Beam Extraction System for FECR”, presented at the 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper WEXZO01, unpublished.
- S. Lederer et al., “XPS Investigations on Cs2Te Photocathodes of FLASH and PITZ”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP054, pp. 482-484.
- J. A. Clarke, H. L. Owen, M. W. Poole, S. L. Smith, and N. G. Wyles, “Prospects for a 4th Generation Light Source for the UK”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPA011, pp. 253-255.
- A. Roth, F. Frommberger, N. Heurich, W. Hillert, M. Schedler, and R. Zimmermann, “Commissioning of Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC077, pp. 250-252.
- A. Schempp et al., “Status of the Frankfurt Zero-Mode Proton RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3536-3539.
- J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS21, pp. XX-XX.
- A. C. Crawford, V. Kashikhin, A. Makarov, S. Nagaitsev, A. Shemyakin, and V. Vostrikov, “Cooling Section Solenoid for the 5 MeV Fermilab Electron Cooling Project”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3A01, pp. 2447-2449.
- C. K. Kuan et al., “Heat Transfer Analysis of a Water-cooled Channel for the TPS Front End Components”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI072, pp. 3466-3468.
- C. I. Briegel, R. Neswold, and M. Z. Sliczniak, “A Protocol for Streaming Large Messages with UDP”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 693-696.
- J. Keil, I. V. Agapov, and R. Brinkmann, “A Lattice for PETRA IV Based on the Combination of Different Arc Cell Designs”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 399-402.
- J. Nguyen Xuan, B. Copy, and M. Donszelmann, “A C/C++ Build System Based on Maven for the LHC Controls System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS026, pp. 848-851.
- J. L. Gonzalez, T. B. Bogey, C. Deplano, and J.-J. Savioz, “Development of a High Dynamic Range Beam Position Measurement System Using Logarithmic Amplifiers for the SPS at CERN”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC18, pp. 89-92.
- H. V. Smith, P. Allison, and J. Sherman, “Pulsed H Beams from Penning SPS Sources Equipped with Circular Emitters”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-47, pp. 164-166.
- R. Hajima and M. Fujiwara, “Generation of GeV Photons from X-ray Free Electron Laser Oscillators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 751-753.
- A. Bosotti, D. Corti, C. Pagani, G. Varisco, F. Zibra, and M. Di Giacomo, “High Sensitivity Electronic System for the Phase Probes of the LNS/MILANO Superconducting Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXD-05, pp. 483-486.
- K. Fransson, K. J. Gajewski, M. Jacewicz, M. Jobs, J. M. Y. Ruber, and V. G. Ziemann, “The EPICS Based Control System at the FREIA Laboratory”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1890-1892.
- G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A model-driven approach for automatic PLC and SCADA code generation”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O5_007.
- D. Trbojevic, M. Blaskiewicz, E. D. Courant, and A. A. Garren, “Fixed Field Alternating Gradient Lattice Design without Opposite Bend”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE051, pp. 1199-1201.
- S. O. Brauer et al., “Design and Testing of a High Power, Ultra-High Vacuum, Dual-Directional Coupler for the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPE09, pp. 2020-2022.
- C. Swain, ?û. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “Improvements on the Modified Nomarski Interferometer for Measurements of Supersonic Gas Jet Density Profiles”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 235-238.
- A. Lueangaramwong et al., “Numerical Study of Beam Dynamics in PITZ Bunch Compressor”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3285-3288.
- Q. Z. Xing et al., “CPHS Linac Status at Tsinghua University”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3268-3270.
- P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
- L. Yang et al., “Low Q Cavity BPM Study for the Beam Position Measurement of Nanosecond Spaced Electron Bunches”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1881-1883.
- T. Furuya et al., “Superconducting Accelerating Cavity for KEK B-Factory”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F35, pp. 729-733.
- K. K. Jain, B. N. Ding, and M. J. Rhee, “Scaling Study of Pseudospark Produced Electron Beam”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1972-1975.
- M. G. Atanasov et al., “Upgrade of the TCDQ Diluters for the LHC Beam Dump System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3079-3082.
- M. Knott, G. Gunderson, F. Lenkszus, and W. McDowell, “Control System Features of the Argonne 6 GeV Synchrotron Light Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2014-2017.
- K. Nakamura et al., “Experimental Study of Self-Trapping in Capillary Discharge Guided Laser Wakefield Acceleration”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP076, pp. 2973-2975.
- D. Banerjee et al., “Studies for the K12 High-Intensity Kaon Beam at CERN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3049-3052.
- S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
- L. Bertolini et al., “Design of the Linear Non-Evaporable Getter Pump for the PEP-II B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P016, pp. 3622-3624.
- G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A framework for the production of 23 homogeneous control systems”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_042.
- M. Yu, D. J. Harding, and G. Velev, “Dipole Corrector Magnets for the LBNE Beam Line”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP152, pp. 1115-1117.
- M. T. Rooney, C. J. Densham, and Y. Yamada, “A FEA Study of the Stress Waves Generated in the T2K Beam Window from the Interaction with a High Power Pulsed Proton Beam”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP038, pp. 2875-2877.
- M. Galonska et al., “Data Supply of Accelerator Devices - Data Management of Device Process Data at a Medical Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 477-480.
- Q. Ji, S. S. Bulanov, E. Esarey, W. Leemans, T. Schenkel, and S. Steinke, “Design of a Compact ion Beam Transport System for the BELLA Ion Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3391-3393.
- Yu. A. Satov et al., “Development of Injector for ITEP Heavy Ion Synchrotron Based on Laser Plasma Generator”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA020, pp. 86-88.
- J. Seeman et al., “Progress of the PEP-II B-Factory”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG015, pp. 2297-2299.
- J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
- S. Litvinov et al., “The Experimental Storage Ring (ESR) - recent developments”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB014, this conference.
- J. T. M. Lyles et al., “A High Power Test Facility for New 201.25 MHz Power Amplifiers and Components”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC070, pp. 3449-3451.
Back to search