Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Okamoto, S. Machida, and K. Yokoya, “Parametric Resonances in Intense Hadron Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE100, pp. 1383-1385.
[n] D. Sertore et al., “Experience on Design, Fabrication and Testing of a Large Grain ESS Medium Beta Prototype Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1027-1030. doi:10.18429/JACoW-IPAC2017-MOPVA068
[n] I. Eliyahu et al., “Use CR-39 Plastic Dosimeters for Beam Ion Halo Measurements”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 376-378. doi:10.18429/JACoW-IBIC2016-TUPG23
[n] S. I. Tomin and A. G. Valentinov, “On-line Beam Control with Ocelot at Siberia-2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 289-291. doi:10.18429/JACoW-IPAC2014-MOPRO086
[n] L. G. Vorobiev and R. C. York, “High Current Beam Simulation using Templates”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE092, pp. 1679-1681.
[n] S. Berg et al., “Rebuilding WR-340 and WR-284 Waveguide Switches to Meet Higher Power at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG001, pp. 1416-1418.
[n] Y. Gao et al., “Initial results of applying an autoencoder to detect anomalies in the air conditioning systems of the Brookhaven accelerator complex”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4448-4451. doi:10.18429/JACoW-IPAC2023-THPL013
[n] H. Park, S. U. De Silva, and J. R. Delayen, “Characteristics and Fabrication of a 499 MHz Superconducting Deflecting Cavity for the Jefferson Lab 12 GeV Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC101, pp. 2450-2452.
[n] X. Wu et al., “The Design of the Isochronous and Achromatic Charge-Stripping Sections for the Rare Isotope Accelerator (RIA)”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE093, pp. 1211-1213.
[n] J. M. Vogt, J. C. Bergstrom, S. Hu, P. L. Lemut, and V. Poucki, “Bunch Cleaning at the Canadian Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP068, pp. 4111-4113.
[n] W. J. Corbett, A. M. Kiss, M. J. Boland, and C. L. Li, “Characterization of Visible Synchrotron Radiation Polarization at SPEAR3”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1240-1242. doi:10.18429/JACoW-IPAC2015-MOPWI035
[n] S. P. Virostek et al., “Update on the Modification and Testing of the MICE Superconducting Spectrometer Solenoids”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO033, pp. 2469-2471.
[n] E. Reinfeld et al., “SARAF Beam Lines Control Systems Design”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS006, pp. 329-332.
[n] J. A. Clarke et al., “An Updated Assessment of a Medical Cyclotron as an Injector for an Energy Upgrade”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4097, pp. 630-632.
[n] V. Dudnikov, R. Hren, C. W. Schmidt, and J. Wendt, “High Current Density Negative Ion Source for Beam Line Transport Studies”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH006, pp. 2090-2092.
[n] T. K. Kroc, T. B. Bolshakov, A. V. Burov, S. Seletsky, and A. V. Shemyakin, “Electron Beam Size Measurements in a Cooling Solenoid”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT069, pp. 3801-3803.
[n] H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 245-248. doi:10.18429/JACoW-SRF2017-MOPB078
[n] N. Barov, J. S. Kim, and D. J. Newsham, “A Compact, Low-Voltage Multi-Beam Klystron for 1300 MHz Cryomodules”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP015, pp. 842-842.
[n] D. L. Friesel et al., “Status of the Midwest Proton Radiotherapy Institute”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAA003, pp. 699-701.
[n] R. C. Niemann et al., “Experimental Evaluation of Design Features of a Cryostat for an Iron-less Costheta SSC Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3710-3714.
[n] H. Okamoto, K. Okabe, and Y. Yuri, “On the Maintenance Condition of a Crystalline Beam”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE101, pp. 1389-1391.
[n] D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
[n] R. Duperrier, R. Ferdinand, N. Pichoff, and D. Uriot, “Beams Dynamics End to End Simulations in IFMIF Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE099, pp. 1335-1337.
[n] T. Satogata et al., “Multi-Million-Turn Beam Position Monitors for RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG047, pp. 2697-2699.
[n] D. E. Young, V. Dudnikov, M. Popovic, C. W. Schmidt, and D. Sun, “Low Energy Improvements to the Fermilab 400-MeV Linear Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH102, pp. 3915-3917.
[n] A. Bosotti et al., “Vertical Tests of ESS Medium Beta Prototype Cavities at LASA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1015-1018. doi:10.18429/JACoW-IPAC2017-MOPVA063
[n] W. E. Norum et al., “First Full-Sector Closed-Loop Operational Experience for the FPGA-Based Broadband Beam Position Monitor at the APS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP004, pp. 3441-3443.
[n] K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345.
[n] M. Dehn et al., “Current Status of the Mainz Energy-Recovering Superconducting Accelerator Project”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP096, pp. 282-284.
[n] F. Antoniou et al., “Intrabeam Scattering Studies at the Swiss Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR057, pp. 1951-1953.
[n] R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
[n] T. Stengler, K. Aulenbacher, F. Hug, D. Simon, and T. Kuerzeder, “Cryomodule Fabrication and Modification for High Current Operation at the Mainz Energy Recovering Superconducting Accelerator MESA”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 297-300. doi:10.18429/JACoW-SRF2017-MOPB101
[n] G. H. Gillespie, B. W. Hill, and G. H. Gillespie Associates Inc, “An Interactive Graphical User Interface for the Linac Beam Dynamics Code PARMILA”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-64, pp. 517-519.
[n] R. B. Wilcox, R. Holzwarth, and J. W. Staples, “Optical Synchronization Systems for Femtosecond X-Ray Sources”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT075, pp. 3958-3960.
[n] J. P. Shanks et al., “Status of Low Emittance Tuning at CesrTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP022, pp. 1540-1542.
[n] Q. Huang et al., “Carbon Nanotube RF Absorbing Materials”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO036, pp. 648-651.
[n] A. Shor, D. Berkovits, I. Fishman, A. Grin, B. Kaizer, and L. Weissman, “Performance of Beam Chopper at SARAF via RF Deflector Before the RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB094, pp. 1038-1040.
[n] S. Xu, R. Laird, F. Lenkszus, H. Shang, and C. Yao, “Fault Diagnosis of the APS Real-time Orbit Feedback System Based on FTA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB048, pp. 2800-2802.
[n] M. Znidarcic and M. Cargnelutti, “Compact Beam Position Monitor for Electron and Proton Machines”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 161-164. doi:10.18429/JACoW-LINAC2016-MOPLR012
[n] R. J. Abrams et al., “Non-Magnetic Momentum Spectrometer Based on Fast Time-of-Flight System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP038, pp. 169-171.
[n] F. M. Liu et al., “Drive Laser System for the DC-SRF Photoinjector at Peking University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4076-4078. doi:10.18429/JACoW-IPAC2016-THPOW058
[n] H. J. Wang, L. Kang, H. Qu, L. Wu, and D. H. Zhu, “Material Test of Proton Beam Window for CSNS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2927-2930. doi:10.18429/JACoW-IPAC2015-WEPMN008
[n] G. H. Gillespie, “Simulating Apertures in the Uniform Equivalent Beam Model”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 87-89. doi:10.18429/JACoW-LINAC2016-MOPRC009
[n] G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
[n] J. Hogan, A. Burrill, G. K. Davis, M. A. Drury, and M. Wiseman, “12 GeV Upgrade Project - Cryomodule Production”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC092, pp. 2429-2431.
[n] S. C. Huang, Y. He, T. Tan, and S. X. Zhang, “The Electromagnetic Optimization of TE-sample Host Cavity at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 852-854. doi:10.18429/JACoW-LINAC2018-THPO069
[n] X. Qi and H. Geng, “Progress on the CSNS Power Supply System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2921-2923. doi:10.18429/JACoW-IPAC2015-WEPMN004
[n] F. Lenkszus and R. Laird, “A Stable Phase Reference for the APS Short-Pulse X-Ray Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP086, pp. 4159-4161.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Okamoto, S. Machida, and K. Yokoya, “Parametric Resonances in Intense Hadron Beams”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE100, pp. 1383-1385.
- D. Sertore et al., “Experience on Design, Fabrication and Testing of a Large Grain ESS Medium Beta Prototype Cavity”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1027-1030.
- I. Eliyahu et al., “Use CR-39 Plastic Dosimeters for Beam Ion Halo Measurements”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 376-378.
- S. I. Tomin and A. G. Valentinov, “On-line Beam Control with Ocelot at Siberia-2”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 289-291.
- L. G. Vorobiev and R. C. York, “High Current Beam Simulation using Templates”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE092, pp. 1679-1681.
- S. Berg et al., “Rebuilding WR-340 and WR-284 Waveguide Switches to Meet Higher Power at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG001, pp. 1416-1418.
- Y. Gao et al., “Initial results of applying an autoencoder to detect anomalies in the air conditioning systems of the Brookhaven accelerator complex”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL013, pp. 4448-4451.
- H. Park, S. U. De Silva, and J. R. Delayen, “Characteristics and Fabrication of a 499 MHz Superconducting Deflecting Cavity for the Jefferson Lab 12 GeV Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC101, pp. 2450-2452.
- X. Wu et al., “The Design of the Isochronous and Achromatic Charge-Stripping Sections for the Rare Isotope Accelerator (RIA)”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE093, pp. 1211-1213.
- J. M. Vogt, J. C. Bergstrom, S. Hu, P. L. Lemut, and V. Poucki, “Bunch Cleaning at the Canadian Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP068, pp. 4111-4113.
- W. J. Corbett, A. M. Kiss, M. J. Boland, and C. L. Li, “Characterization of Visible Synchrotron Radiation Polarization at SPEAR3”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1240-1242.
- S. P. Virostek et al., “Update on the Modification and Testing of the MICE Superconducting Spectrometer Solenoids”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO033, pp. 2469-2471.
- E. Reinfeld et al., “SARAF Beam Lines Control Systems Design”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS006, pp. 329-332.
- J. A. Clarke et al., “An Updated Assessment of a Medical Cyclotron as an Injector for an Energy Upgrade”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4097, pp. 630-632.
- V. Dudnikov, R. Hren, C. W. Schmidt, and J. Wendt, “High Current Density Negative Ion Source for Beam Line Transport Studies”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH006, pp. 2090-2092.
- T. K. Kroc, T. B. Bolshakov, A. V. Burov, S. Seletsky, and A. V. Shemyakin, “Electron Beam Size Measurements in a Cooling Solenoid”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT069, pp. 3801-3803.
- H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 245-248.
- N. Barov, J. S. Kim, and D. J. Newsham, “A Compact, Low-Voltage Multi-Beam Klystron for 1300 MHz Cryomodules”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP015, pp. 842-842.
- D. L. Friesel et al., “Status of the Midwest Proton Radiotherapy Institute”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAA003, pp. 699-701.
- R. C. Niemann et al., “Experimental Evaluation of Design Features of a Cryostat for an Iron-less Costheta SSC Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3710-3714.
- H. Okamoto, K. Okabe, and Y. Yuri, “On the Maintenance Condition of a Crystalline Beam”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE101, pp. 1389-1391.
- D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
- R. Duperrier, R. Ferdinand, N. Pichoff, and D. Uriot, “Beams Dynamics End to End Simulations in IFMIF Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE099, pp. 1335-1337.
- T. Satogata et al., “Multi-Million-Turn Beam Position Monitors for RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG047, pp. 2697-2699.
- D. E. Young, V. Dudnikov, M. Popovic, C. W. Schmidt, and D. Sun, “Low Energy Improvements to the Fermilab 400-MeV Linear Accelerator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH102, pp. 3915-3917.
- A. Bosotti et al., “Vertical Tests of ESS Medium Beta Prototype Cavities at LASA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1015-1018.
- W. E. Norum et al., “First Full-Sector Closed-Loop Operational Experience for the FPGA-Based Broadband Beam Position Monitor at the APS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP004, pp. 3441-3443.
- K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345.
- M. Dehn et al., “Current Status of the Mainz Energy-Recovering Superconducting Accelerator Project”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP096, pp. 282-284.
- F. Antoniou et al., “Intrabeam Scattering Studies at the Swiss Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR057, pp. 1951-1953.
- R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
- T. Stengler, K. Aulenbacher, F. Hug, D. Simon, and T. Kuerzeder, “Cryomodule Fabrication and Modification for High Current Operation at the Mainz Energy Recovering Superconducting Accelerator MESA”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 297-300.
- G. H. Gillespie, B. W. Hill, and G. H. Gillespie Associates Inc, “An Interactive Graphical User Interface for the Linac Beam Dynamics Code PARMILA”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-64, pp. 517-519.
- R. B. Wilcox, R. Holzwarth, and J. W. Staples, “Optical Synchronization Systems for Femtosecond X-Ray Sources”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT075, pp. 3958-3960.
- J. P. Shanks et al., “Status of Low Emittance Tuning at CesrTA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP022, pp. 1540-1542.
- Q. Huang et al., “Carbon Nanotube RF Absorbing Materials”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO036, pp. 648-651.
- A. Shor, D. Berkovits, I. Fishman, A. Grin, B. Kaizer, and L. Weissman, “Performance of Beam Chopper at SARAF via RF Deflector Before the RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB094, pp. 1038-1040.
- S. Xu, R. Laird, F. Lenkszus, H. Shang, and C. Yao, “Fault Diagnosis of the APS Real-time Orbit Feedback System Based on FTA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB048, pp. 2800-2802.
- M. Znidarcic and M. Cargnelutti, “Compact Beam Position Monitor for Electron and Proton Machines”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 161-164.
- R. J. Abrams et al., “Non-Magnetic Momentum Spectrometer Based on Fast Time-of-Flight System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP038, pp. 169-171.
- F. M. Liu et al., “Drive Laser System for the DC-SRF Photoinjector at Peking University”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4076-4078.
- H. J. Wang, L. Kang, H. Qu, L. Wu, and D. H. Zhu, “Material Test of Proton Beam Window for CSNS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2927-2930.
- G. H. Gillespie, “Simulating Apertures in the Uniform Equivalent Beam Model”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 87-89.
- G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
- J. Hogan, A. Burrill, G. K. Davis, M. A. Drury, and M. Wiseman, “12 GeV Upgrade Project - Cryomodule Production”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC092, pp. 2429-2431.
- S. C. Huang, Y. He, T. Tan, and S. X. Zhang, “The Electromagnetic Optimization of TE-sample Host Cavity at IMP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 852-854.
- X. Qi and H. Geng, “Progress on the CSNS Power Supply System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2921-2923.
- F. Lenkszus and R. Laird, “A Stable Phase Reference for the APS Short-Pulse X-Ray Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP086, pp. 4159-4161.
Back to search