Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hahn and A. Ratti, “The Coupling Impedance of the RHIC Injection Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V028, pp. 1706-1708.
[n] K. Seiya et al., “RF system upgrade for 1.3 MW operation of J-PARC main ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1017-1020. doi:10.18429/JACoW-IPAC2024-TUPC10
[n] R. M??ller, J. Feikes, K. Holldack, and P. Kuske, “Orbit Stability at BESSY”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE035, pp. 2366-2368.
[n] Z. Mart?¡, G. Benedetti, M. Carl?á, U. Iriso, and L. Torino, “Full Coupling Studies at ALBA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1667-1670. doi:10.18429/JACoW-IPAC2022-WEOZSP4
[n] B. Mukherjee, “A RADIOLOGICAL SAFETY AND HEALTH PHYSICS DATABASE FOR CYCLOTRONS ACCELERATING PROTONS AND DEUTERONS UP TO 250 MEV”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P22, pp. XX-XX.
[n] R. A. Rimmer et al., “The JLAB Ampere-class Cryomodule Conceptual Design”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH182, pp. 490-492.
[n] L. Calabretta et al., “Towards the Acceleration of the First Beam by the INFN Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 551-554.
[n] T. Birke et al., “Use Case - Configuration Management with a generic RDB Data-Model”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_079.
[n] T. Kosuge, “STARS .NET Interface for Windows CE”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW01, pp. 31-33.
[n] E. N. Zaplatin, C. H. Boulware, T. L. Grimm, A. Rogacki, A. Kanareykin, and V. P. Yakovlev, “Manufacturing and First Test Results of Euclid SRF Conical Half-wave Resonator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2841-2844. doi:10.18429/JACoW-IPAC2015-WEPMA037
[n] H. Maesaka et al., “Precise RF Control System of the SCSS Test Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC143, pp. 1404-1406.
[n] P. Attal, E. Baron, C. Bieth, M. P. Bourgarel, R. Gayraud, and C. Pagani, “The GANIL Injector Design”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-16, pp. 1944-1947.
[n] P. H. Gao et al., “Redundancy Analysis of Solid-state Ampliifers for CiADS Accelerator”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 169-171. doi:10.18429/JACoW-SAP2017-TUPH30
[n] K. Hasegawa et al., “Status and Upgrade Plan of the MR Ring RF Systems in J-PARC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2031-2033. doi:10.18429/JACoW-IPAC2022-WEPOTK004
[n] V. Pinty, N. Jaouen, F. Marteau, H. Popescu, and P. Prout, “MAGSTAT V3: An In-Vacuum Variable-Gap Quadrupole with Rotary Permanent Magnets”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 412-414. doi:10.18429/JACoW-MEDSI2018-THPH37
[n] S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 121-124.
[n] O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Enhancing beam intensity in SIS18 by a two-plane multi-turn injection approach”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS141, unpublished.
[n] R. Wehrle, S. Kim, J. Moenich, and R. Nielsen, “Vacuum System for the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1669-1672.
[n] W. Roberts and B. Aikens, “A 256 Channel Digital Filter for a Data Acquisition System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1455-1458.
[n] K. Umemori, T. Furuya, H. Sakai, M. Sawamura, K. Shinoe, and T. Takahashi, “Status of 9-cell Superconducting Cavity Development for ERL Project in Japan”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO055, pp. 355-358.
[n] A. E. Vlieks, S. G. Anderson, V. A. Dolgashev, F. V. Hartemann, R. A. Marsh, and S. G. Tantawi, “X-band RF Gun Development”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA063, pp. 3816-3818.
[n] P.-E. Bernaudin et al., “Design of the Low-beta, Quarter-wave Resonator and its Cryomodule for the SPIRAL 2 Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT054, pp. 1276-1278.
[n] S. Sarkar, P. Bennett, Y. Miles, M. Mouat, A. Purvis, and W. Roberts, “Vax Q-Bus to CAMAC Systems Crate Interface for Long Camac Branches”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1690-1693.
[n] M. E. Bevins et al., “Mechanical and Thermal Design of the CEBAF Hall A Beam Calorimeter”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT070, pp. 3819-3821.
[n] J. R. Delayen, G. K. Davis, M. Drury, and E. Feldl, “Development and Testing of a Prototype Tuner for the CEBAF Upgrade Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH156, pp. 1149-1151.
[n] A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “Automated Design for Standing Wave Electron Photoguns: TOPGUN RF Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3999-4001. doi:10.18429/JACoW-IPAC2016-THPOW028
[n] K. Wu, B. Du, S. Ma, S. Zhang, J. Pang, and S. Dong, “Development of RF reference distribution system for Hefei Advanced Light Facility”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3375-3377. doi:10.18429/JACoW-IPAC2024-THPG48
[n] P. Krejcik, M. L. Campell, J. M. D, H. Loos, and K. Luchini, “Performance of the New Fast Wire Scanner at the LCLS”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 547-549. doi:10.18429/JACoW-IBIC2015-TUPB082
[n] W. R. Baker, W. L. Gagnon, and F. Voelker, “Flat-Topping Magnet Current for the Berkeley Electron Ring in a Static Magnetic Field”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1047-1050.
[n] A. Ratti et al., “Prototype Models for the SNS RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4084, pp. 600-602.
[n] J. Chen et al., “Emittance Measurement by Using Duo Image Pattern of Cherenkov Radiation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB076, pp. 2580-2582.
[n] D. C. Fiander, D. Grier, K-D. Metzmacher, and P. Pearce, “A Modulated Fast Bump for the CPS Continuous Transfer”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1340-1343.
[n] M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
[n] J. Kirchgessner et al., “Fabrication of Superconducting Niobium Radio Frequency Structures”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3351-3354.
[n] R. Brinkmann, Y. Derbenev, M. Gentner, D. Husmann, and C. Steier, “Electron Cooling Possibilities for HERA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP54C, pp. 344-346.
[n] F. Ravotti et al., “The Beam Profile Monitoring System for the CERN IRRAD Proton Facility”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 825-828. doi:10.18429/JACoW-IBIC2016-WEPG75
[n] J. Corlett et al., “A Recirculating Linac-Based Facility for Ultrafast X-Ray Science”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC003, pp. 186-188.
[n] M. Heilmann et al., “High Power RF Coupler for the CW-Linac Demonstrator at GSI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 990-992. doi:10.18429/JACoW-IPAC2017-MOPVA054
[n] K. Furukawa, M. Satoh, I. Mejuev, and K. Nakao, “A Java-based EPICS Archive Viewer with SOAP Interface for Data Retrieval”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP707, pp. XX-XX.
[n] G. Benedetti, U. Iriso, Z. Mart?¡, and F. P?®rez, “First Study for an Upgrade of the ALBA Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1544-1546. doi:10.18429/JACoW-IPAC2019-TUPGW061
[n] G. Moreno et al., “H11(0) end cells for a 750 MHz IH structure”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1699-1702. doi:10.18429/JACoW-IPAC2023-TUPA171
[n] X. D. Yu et al., “Tuning of a Four-vane RFQ for Xi'an 200 MeV Proton Application Facility”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 838-840. doi:10.18429/JACoW-LINAC2018-THPO064
[n] D. Ehst, N. V. Mokhov, R. J. Noble, and A. Van Ginneken, “Target Options and Yields for a Muon Collider Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W023, pp. 393-395.
[n] Z. Fang et al., “Present Status of RF System for Medical Proton Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT052, pp. 3185-3187.
[n] D. Van Winkle, V. A. Dolgashev, J. D. Fox, and S. G. Tantawi, “Investigations into Cost Reductions of X-band Instrumentation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP015, pp. 1559-1561.
[n] R. Müller et al., “Experimental Data Taking and Management: The Upgrade Process at BESSY II and HZB”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 84-89. doi:10.18429/JACoW-ICALEPCS2023-MO2AO04
[n] F. Severino et al., “Embedded System Architecture and Capabilities of the RHIC LLRF Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP296, pp. 672-674.
[n] K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2060-2063. doi:10.18429/JACoW-IPAC2024-WEPC43
[n] D. Shuman, A. Faltens, M. Kireeff Covo, G. Ritchie, and P. A. Seidl, “A Compact High Gradient Pulsed Magnetic Quadrupole”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT068, pp. 3771-3773.
[n] R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 294-297. doi:10.18429/JACoW-LINAC2016-MOPLR070
[n] H. Andrews et al., “A laser heated thermionic cathode”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2090-2092. doi:10.18429/JACoW-IPAC2024-WEPC55
[n] D. Huang, H. X. Deng, C. Feng, D. Gu, Q. Gu, and Z. T. Zhao, “Applying Transverse Gradient Undulators to Suppression of Microbunching Instability”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 380-383. doi:10.18429/JACoW-LINAC2016-TUOP01
[n] Z. Fang et al., “LLRF Controller Upgrade for the J-PARC 400 MeV LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA046, pp. 1434-1436.
[n] X. Lu et al., “Development progress of high-level applications for the HEPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4259-4261. doi:10.18429/JACoW-IPAC2023-THPA125
[n] M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB052, unpublished.
[n] P. Hamel, P. Bosland, and O. Piquet, “Reverse engineering on IPHI RFQ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1706-1708. doi:10.18429/JACoW-IPAC2023-TUPA173
[n] F. Momal et al., “A Control Systembased on Industrial Components for Measuring and Testing the Prototype Magnets for LHC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2322-2325.
[n] Z. Martí, G. Benedetti, M. Carlà, and U. Iriso, “ALBA-II first tolerance studies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3104-3107. doi:10.18429/JACoW-IPAC2023-WEPL003
[n] W. L. Chen et al., “Beam Parameter Reconstruction at the Input of LEBT of C-ADS Injector II”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 103-105. doi:10.18429/JACoW-SAP2017-MOPH32
[n] D. Huang, D. Gu, and M. Zhang, “Study of Microbunching Instability in SHINE Linac”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 629-631. doi:10.18429/JACoW-FEL2019-THP016
[n] R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Implication of Manufacturing Errors on the Layout of Stabilization System and on the Field Quality in a Drift Tube Linac - RF DTL Error Study”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 290-293. doi:10.18429/JACoW-LINAC2016-MOPLR069
[n] P. Tenenbaum, R. Brinkmann, and V. Tsakanov, “Beam-based Alignment of the TESLA Main Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI054, pp. 515-517.
[n] S. E. Karnaev, E. V. Goman, O. A. Plotnikova, and E. A. Simonov, “The Database of the VEPP-4 Accelerating Facility Parameters”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW04, pp. 40-42.
[n] C. E. Reece et al., “High Thermal Conductivity Cryogenic RF Feedthroughs for Higher Order Mode Couplers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT082, pp. 4108-4110.
[n] P. J. Bryant, “Synchrotron-Driven Spallation Sources”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG03, pp. 322-326.
[n] J. Q. Li, “Production of intense carbon beams with permanent magnet ECR ion sources”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRT7AUCO24, unpublished.
[n] J. Feikes, K. Holldack, P. Kuske, and R. M??ller, “Beam Stabilization at BESSY: Set-up, Performance, Plans”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH112, pp. XX-XX.
[n] A. Stirin, P. Aleksandrov, V. Korchuganov, E. B. Aleksandrov, and V. S. Zapasskii, “Measurement of Speed of Light Emitted by Ultrarelativistic Source”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD009, pp. 584-586.
[n] N. Nakamura, H. Sakai, and H. Takaki, “Simulation Study of Resistive-wall Beam Breakup for ERLs”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN042, pp. 1010-1012.
[n] J. Guo, D. W. Martin, S. G. Tantawi, and C. Yoneda, “Cryogenic RF Material Testing at SLAC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP102, pp. 1030-1032.
[n] D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
[n] F. Caspers and G. Dome, “Reciprocity between Pick-up and Kicker Structures including the Far-Field Zone”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1208-1211.
[n] J. F. Zhang and A. Loulergue, “Dipole Fringe Field Effects in the ThomX Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA003, pp. 2504-2506.
[n] A. Grassellino, J. K. Keung, N. Lockyer, and F. M. Newcomer, “FPGA Based ILC Cavity Simulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS086, pp. 632-633.
[n] M. Sawamura, E. Cenni, T. Furuya, H. Sakai, K. Umemori, and K. Shinoe, “Cooling Properties of HOM Absorber Model for cERL in Japan”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO003, pp. 350-352.
[n] C. Feng, Y. He, W. S. Wang, and Z. J. Wang, “Calibration of the BPM Offsets in Cryomodule at CiADS Injector II”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 119-120. doi:10.18429/JACoW-SAP2017-MOPH37
[n] B. Keil et al., “The European XFEL Beam Position Monitor System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE064, pp. 1125-1127.
[n] F. Caspers, H. Haseroth, and J. Knott, “High Gradients by Simultaneous Multifrequency Operations of RF Structures”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 112-115.
[n] K. Futatsukawa, Z. Fang, Y. Fukui, Y. Sato, and S. Shinozaki, “Improvement of the Chopper System for rf Deflector at the J-PARC Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2816-2818. doi:10.18429/JACoW-IPAC2018-WEPML051
[n] J. L. Wilson, A. E. Fathy, and Y. W. Kang, “Investigation of Ferroelectrics for High-Power RF Phase Shifters in Accelerator Systems”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP030, pp. 637-639.
[n] J. Orpana et al., “Measurement of Microwave Frequencies Emitted by Instabilities of ECRIS Plasma with Waveguide Filters and Microwave Sensitive Diodes”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 133-136. doi:10.18429/JACoW-ECRIS2016-WEPP41
[n] P. J. Bryant, “The Revised Skew Quadrupole System for Coupling Compensation in the CERN Intersecting Storage Rings (ISR)”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3499-3502.
[n] R. Barday et al., “Instrumentation Needs and Solutions for the Development of an SRF Photoelectron Injector at the Energy-Recovery Linac BERLinPro”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD07, pp. 317-319.
[n] M. Gusarova, W. A. Barth, S. Yaramyshev, M. Miski-Oglu, M. Basten, and M. Busch, “Design of the Two-Gap Superconducting Re-Buncher”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2779-2782. doi:10.18429/JACoW-IPAC2018-WEPML039
[n] J. C. Smith, L. Keller, S. A. Lundgren, T. W. Markiewicz, and A. Young, “BPM Design and Impedance Considerations for a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB079, pp. 1704-1706.
[n] V. V. Shirokov et al., “Compact Tandem Accelerator Based Neutron Source for the Medicine”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT121, pp. 1422-1424.
[n] G. E. Fischer et al., “Some Experiences from the Commissioning Program of the SLC Arcs”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 139-142.
[n] J. Cao, “The Progress Of BEPCII Storage Ring Diagnostics System”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOVTC03, pp. 41-45.
[n] N. V. Mokhov and A. Van Ginneken, “Muons versus Hadrons for Radiotherapy”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP118, pp. 2525-2527.
[n] Y. Fuwa, Y. Iwashita, H. Tongu, M. Ichikawa, and N. Miyawaki, “Development of Compact H+ ECR Ion Source with Pulse Gas Valve”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 98-100. doi:10.18429/JACoW-ECRIS2016-WEPP08
[n] M. C. L. Buzio et al., “Measurement and Scaling Laws of the Sextupolar Component in the LHC Dipole Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB018, pp. 316-318.
[n] C. G. Beetham et al., “Conversion of the SPS to a Multicycling Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1231-1234.
[n] K. Yonehara et al., “Traveling Wave RF Systems for Helical Cooling Channels”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP021, pp. 858-860.
[n] J. M. D, M. L. Campell, P. Krejcik, H. Loos, and K. Luchini, “Fast Wire Scanner Upgrade for LCLS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 114-116. doi:10.18429/JACoW-ICALEPCS2015-MOPGF015
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hahn and A. Ratti, “The Coupling Impedance of the RHIC Injection Kicker System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V028, pp. 1706-1708.
- K. Seiya et al., “RF system upgrade for 1.3 MW operation of J-PARC main ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC10, pp. 1017-1020.
- R. M??ller, J. Feikes, K. Holldack, and P. Kuske, “Orbit Stability at BESSY”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE035, pp. 2366-2368.
- Z. Mart?¡, G. Benedetti, M. Carl?á, U. Iriso, and L. Torino, “Full Coupling Studies at ALBA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1667-1670.
- B. Mukherjee, “A RADIOLOGICAL SAFETY AND HEALTH PHYSICS DATABASE FOR CYCLOTRONS ACCELERATING PROTONS AND DEUTERONS UP TO 250 MEV”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P22, pp. XX-XX.
- R. A. Rimmer et al., “The JLAB Ampere-class Cryomodule Conceptual Design”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH182, pp. 490-492.
- L. Calabretta et al., “Towards the Acceleration of the First Beam by the INFN Superconducting Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 551-554.
- T. Birke et al., “Use Case - Configuration Management with a generic RDB Data-Model”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_079.
- T. Kosuge, “STARS .NET Interface for Windows CE”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOW01, pp. 31-33.
- E. N. Zaplatin, C. H. Boulware, T. L. Grimm, A. Rogacki, A. Kanareykin, and V. P. Yakovlev, “Manufacturing and First Test Results of Euclid SRF Conical Half-wave Resonator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2841-2844.
- H. Maesaka et al., “Precise RF Control System of the SCSS Test Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC143, pp. 1404-1406.
- P. Attal, E. Baron, C. Bieth, M. P. Bourgarel, R. Gayraud, and C. Pagani, “The GANIL Injector Design”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-16, pp. 1944-1947.
- P. H. Gao et al., “Redundancy Analysis of Solid-state Ampliifers for CiADS Accelerator”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 169-171.
- K. Hasegawa et al., “Status and Upgrade Plan of the MR Ring RF Systems in J-PARC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2031-2033.
- V. Pinty, N. Jaouen, F. Marteau, H. Popescu, and P. Prout, “MAGSTAT V3: An In-Vacuum Variable-Gap Quadrupole with Rotary Permanent Magnets”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 412-414.
- S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 121-124.
- O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Enhancing beam intensity in SIS18 by a two-plane multi-turn injection approach”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS141, this conference.
- R. Wehrle, S. Kim, J. Moenich, and R. Nielsen, “Vacuum System for the Synchrotron X-Ray Source at Argonne”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1669-1672.
- W. Roberts and B. Aikens, “A 256 Channel Digital Filter for a Data Acquisition System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1455-1458.
- K. Umemori, T. Furuya, H. Sakai, M. Sawamura, K. Shinoe, and T. Takahashi, “Status of 9-cell Superconducting Cavity Development for ERL Project in Japan”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO055, pp. 355-358.
- A. E. Vlieks, S. G. Anderson, V. A. Dolgashev, F. V. Hartemann, R. A. Marsh, and S. G. Tantawi, “X-band RF Gun Development”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA063, pp. 3816-3818.
- P.-E. Bernaudin et al., “Design of the Low-beta, Quarter-wave Resonator and its Cryomodule for the SPIRAL 2 Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT054, pp. 1276-1278.
- S. Sarkar, P. Bennett, Y. Miles, M. Mouat, A. Purvis, and W. Roberts, “Vax Q-Bus to CAMAC Systems Crate Interface for Long Camac Branches”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1690-1693.
- M. E. Bevins et al., “Mechanical and Thermal Design of the CEBAF Hall A Beam Calorimeter”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT070, pp. 3819-3821.
- J. R. Delayen, G. K. Davis, M. Drury, and E. Feldl, “Development and Testing of a Prototype Tuner for the CEBAF Upgrade Cryomodule”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH156, pp. 1149-1151.
- A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “Automated Design for Standing Wave Electron Photoguns: TOPGUN RF Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3999-4001.
- K. Wu, B. Du, S. Ma, S. Zhang, J. Pang, and S. Dong, “Development of RF reference distribution system for Hefei Advanced Light Facility”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG48, pp. 3375-3377.
- P. Krejcik, M. L. Campell, J. M. D, H. Loos, and K. Luchini, “Performance of the New Fast Wire Scanner at the LCLS”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 547-549.
- W. R. Baker, W. L. Gagnon, and F. Voelker, “Flat-Topping Magnet Current for the Berkeley Electron Ring in a Static Magnetic Field”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1047-1050.
- A. Ratti et al., “Prototype Models for the SNS RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4084, pp. 600-602.
- J. Chen et al., “Emittance Measurement by Using Duo Image Pattern of Cherenkov Radiation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB076, pp. 2580-2582.
- D. C. Fiander, D. Grier, K-D. Metzmacher, and P. Pearce, “A Modulated Fast Bump for the CPS Continuous Transfer”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1340-1343.
- M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
- J. Kirchgessner et al., “Fabrication of Superconducting Niobium Radio Frequency Structures”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3351-3354.
- R. Brinkmann, Y. Derbenev, M. Gentner, D. Husmann, and C. Steier, “Electron Cooling Possibilities for HERA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP54C, pp. 344-346.
- F. Ravotti et al., “The Beam Profile Monitoring System for the CERN IRRAD Proton Facility”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 825-828.
- J. Corlett et al., “A Recirculating Linac-Based Facility for Ultrafast X-Ray Science”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC003, pp. 186-188.
- M. Heilmann et al., “High Power RF Coupler for the CW-Linac Demonstrator at GSI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 990-992.
- K. Furukawa, M. Satoh, I. Mejuev, and K. Nakao, “A Java-based EPICS Archive Viewer with SOAP Interface for Data Retrieval”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP707, pp. XX-XX.
- G. Benedetti, U. Iriso, Z. Mart?¡, and F. P?®rez, “First Study for an Upgrade of the ALBA Lattice”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1544-1546.
- G. Moreno et al., “H11(0) end cells for a 750 MHz IH structure”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA171, pp. 1699-1702.
- X. D. Yu et al., “Tuning of a Four-vane RFQ for Xi'an 200 MeV Proton Application Facility”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 838-840.
- D. Ehst, N. V. Mokhov, R. J. Noble, and A. Van Ginneken, “Target Options and Yields for a Muon Collider Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W023, pp. 393-395.
- Z. Fang et al., “Present Status of RF System for Medical Proton Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT052, pp. 3185-3187.
- D. Van Winkle, V. A. Dolgashev, J. D. Fox, and S. G. Tantawi, “Investigations into Cost Reductions of X-band Instrumentation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP015, pp. 1559-1561.
- R. Müller et al., “Experimental Data Taking and Management: The Upgrade Process at BESSY II and HZB”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2AO04, pp. 84-89.
- F. Severino et al., “Embedded System Architecture and Capabilities of the RHIC LLRF Platform”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP296, pp. 672-674.
- K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC43, pp. 2060-2063.
- D. Shuman, A. Faltens, M. Kireeff Covo, G. Ritchie, and P. A. Seidl, “A Compact High Gradient Pulsed Magnetic Quadrupole”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT068, pp. 3771-3773.
- R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 294-297.
- H. Andrews et al., “A laser heated thermionic cathode”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC55, pp. 2090-2092.
- D. Huang, H. X. Deng, C. Feng, D. Gu, Q. Gu, and Z. T. Zhao, “Applying Transverse Gradient Undulators to Suppression of Microbunching Instability”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 380-383.
- Z. Fang et al., “LLRF Controller Upgrade for the J-PARC 400 MeV LINAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA046, pp. 1434-1436.
- X. Lu et al., “Development progress of high-level applications for the HEPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA125, pp. 4259-4261.
- M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB052, this conference.
- P. Hamel, P. Bosland, and O. Piquet, “Reverse engineering on IPHI RFQ”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA173, pp. 1706-1708.
- F. Momal et al., “A Control Systembased on Industrial Components for Measuring and Testing the Prototype Magnets for LHC”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2322-2325.
- Z. Martí, G. Benedetti, M. Carlà, and U. Iriso, “ALBA-II first tolerance studies”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL003, pp. 3104-3107.
- W. L. Chen et al., “Beam Parameter Reconstruction at the Input of LEBT of C-ADS Injector II”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 103-105.
- D. Huang, D. Gu, and M. Zhang, “Study of Microbunching Instability in SHINE Linac”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 629-631.
- R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Implication of Manufacturing Errors on the Layout of Stabilization System and on the Field Quality in a Drift Tube Linac - RF DTL Error Study”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 290-293.
- P. Tenenbaum, R. Brinkmann, and V. Tsakanov, “Beam-based Alignment of the TESLA Main Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI054, pp. 515-517.
- S. E. Karnaev, E. V. Goman, O. A. Plotnikova, and E. A. Simonov, “The Database of the VEPP-4 Accelerating Facility Parameters”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOW04, pp. 40-42.
- C. E. Reece et al., “High Thermal Conductivity Cryogenic RF Feedthroughs for Higher Order Mode Couplers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT082, pp. 4108-4110.
- P. J. Bryant, “Synchrotron-Driven Spallation Sources”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPG03, pp. 322-326.
- J. Q. Li, “Production of intense carbon beams with permanent magnet ECR ion sources”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRT7AUCO24, unpublished.
- J. Feikes, K. Holldack, P. Kuske, and R. M??ller, “Beam Stabilization at BESSY: Set-up, Performance, Plans”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH112, pp. XX-XX.
- A. Stirin, P. Aleksandrov, V. Korchuganov, E. B. Aleksandrov, and V. S. Zapasskii, “Measurement of Speed of Light Emitted by Ultrarelativistic Source”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD009, pp. 584-586.
- N. Nakamura, H. Sakai, and H. Takaki, “Simulation Study of Resistive-wall Beam Breakup for ERLs”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN042, pp. 1010-1012.
- J. Guo, D. W. Martin, S. G. Tantawi, and C. Yoneda, “Cryogenic RF Material Testing at SLAC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP102, pp. 1030-1032.
- D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
- F. Caspers and G. Dome, “Reciprocity between Pick-up and Kicker Structures including the Far-Field Zone”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1208-1211.
- J. F. Zhang and A. Loulergue, “Dipole Fringe Field Effects in the ThomX Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA003, pp. 2504-2506.
- A. Grassellino, J. K. Keung, N. Lockyer, and F. M. Newcomer, “FPGA Based ILC Cavity Simulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS086, pp. 632-633.
- M. Sawamura, E. Cenni, T. Furuya, H. Sakai, K. Umemori, and K. Shinoe, “Cooling Properties of HOM Absorber Model for cERL in Japan”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO003, pp. 350-352.
- C. Feng, Y. He, W. S. Wang, and Z. J. Wang, “Calibration of the BPM Offsets in Cryomodule at CiADS Injector II”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 119-120.
- B. Keil et al., “The European XFEL Beam Position Monitor System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE064, pp. 1125-1127.
- F. Caspers, H. Haseroth, and J. Knott, “High Gradients by Simultaneous Multifrequency Operations of RF Structures”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 112-115.
- K. Futatsukawa, Z. Fang, Y. Fukui, Y. Sato, and S. Shinozaki, “Improvement of the Chopper System for rf Deflector at the J-PARC Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2816-2818.
- J. L. Wilson, A. E. Fathy, and Y. W. Kang, “Investigation of Ferroelectrics for High-Power RF Phase Shifters in Accelerator Systems”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP030, pp. 637-639.
- J. Orpana et al., “Measurement of Microwave Frequencies Emitted by Instabilities of ECRIS Plasma with Waveguide Filters and Microwave Sensitive Diodes”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 133-136.
- P. J. Bryant, “The Revised Skew Quadrupole System for Coupling Compensation in the CERN Intersecting Storage Rings (ISR)”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3499-3502.
- R. Barday et al., “Instrumentation Needs and Solutions for the Development of an SRF Photoelectron Injector at the Energy-Recovery Linac BERLinPro”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD07, pp. 317-319.
- M. Gusarova, W. A. Barth, S. Yaramyshev, M. Miski-Oglu, M. Basten, and M. Busch, “Design of the Two-Gap Superconducting Re-Buncher”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2779-2782.
- J. C. Smith, L. Keller, S. A. Lundgren, T. W. Markiewicz, and A. Young, “BPM Design and Impedance Considerations for a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB079, pp. 1704-1706.
- V. V. Shirokov et al., “Compact Tandem Accelerator Based Neutron Source for the Medicine”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT121, pp. 1422-1424.
- G. E. Fischer et al., “Some Experiences from the Commissioning Program of the SLC Arcs”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 139-142.
- J. Cao, “The Progress Of BEPCII Storage Ring Diagnostics System”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper MOVTC03, pp. 41-45.
- N. V. Mokhov and A. Van Ginneken, “Muons versus Hadrons for Radiotherapy”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP118, pp. 2525-2527.
- Y. Fuwa, Y. Iwashita, H. Tongu, M. Ichikawa, and N. Miyawaki, “Development of Compact H+ ECR Ion Source with Pulse Gas Valve”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 98-100.
- M. C. L. Buzio et al., “Measurement and Scaling Laws of the Sextupolar Component in the LHC Dipole Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB018, pp. 316-318.
- C. G. Beetham et al., “Conversion of the SPS to a Multicycling Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1231-1234.
- K. Yonehara et al., “Traveling Wave RF Systems for Helical Cooling Channels”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP021, pp. 858-860.
- J. M. D, M. L. Campell, P. Krejcik, H. Loos, and K. Luchini, “Fast Wire Scanner Upgrade for LCLS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 114-116.
Back to search