Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Jeff, T. Lefevre, and C. P. Welsch, “Off-Axis Undulator Radiation for CLIC Drive Beam Diagnostics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF10, pp. 228-231.
[n] P. Van Trappen, E. Carlier, and S. Uyttenhove, “A Fast Interlock Detection System for High-Power Switch Protection”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 367-370. doi:10.18429/JACoW-ICALEPCS2015-MOPGF122
[n] H. Jiang, P. Li, and T. G. Xu, “Measurements of Beam Halo by Wire Scanner Monitor”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 393-395. doi:10.18429/JACoW-IBIC2015-TUPB030
[n] D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3621-3623. doi:10.18429/JACoW-IPAC2017-WEPVA150
[n] J. W. G. Thomason et al., “The RFQ Test Stand Ion Source at RAL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI011, pp. 1741-1743.
[n] M. Boscolo et al., “Machine Detector Interface for the e+e- Future Circular Collider”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 201. doi:10.18429/JACoW-eeFACT2018-WEXBA02
[n] T. Ieiri et al., “Beam Monitors and Transverse Feedback Systems of TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 729-732.
[n] A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
[n] K. Akai et al., “Higher-Order Mode HOM Characteristics of the Choke-Mode Cavity for the KEK B-Factory KEKB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP095L, pp. 2074-2078.
[n] E. Cavaliere et al., “High Pressure Rinsing Parameters Measurements”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP10, pp. 475-477.
[n] C. Ohmori et al., “New Cutting Scheme of Magnetic Alloy Cores for J-PARC Synchrotrons”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH128, pp. 1313-1315.
[n] A. Bosotti, C. Pagani, N. Panzeri, and R. Paparella, “The Coaxial Tuner for ILCTANML at Fermilab”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP146, pp. 895-897.
[n] A. Uchiyama et al., “Development of Embedded EPICS on F3RP61-2L”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEX03, pp. 145-147.
[n] W. X. Cheng, B. Bacha, Y. Li, O. Singh, and Y. Tian, “Beam Stability During Top Off Operation at NSLS-II Storage Ring”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 425-427. doi:10.18429/JACoW-NAPAC2016-TUPOA71
[n] O. Actis, A. Mayor, D. Meer, and D. C. Weber, “Precise Beam Delivery for Proton Therapy with Dynamic Energy Modulation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 540-542. doi:10.18429/JACoW-IPAC2018-MOPML059
[n] A. Solodko et al., “Novel Manufacturing Concepts for 12 GHz High Gradient Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3787-3790. doi:10.18429/JACoW-IPAC2017-THPAB039
[n] T. Tanabe, T. Honma, and T. Watanabe, “Electron Cooler at INS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 651-654.
[n] R. Geller, K. Golovanivsky, and G. Melin, “ECRIPAC: A New Concept for the Production and Acceleration to Very High Energies of Multiply Charged Ions Using an ECR Plasma”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 449-452.
[n] A. De Franco et al., “Upgrade Study of the MedAustron Ion Beam Center”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4619-4622. doi:10.18429/JACoW-IPAC2017-THPVA074
[n] K. Alrutz-Ziemssen et al., “First Operation of the Superconducting 130 MeV CW-Electron-Accelerator at Darmstadt”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH416, pp. 626-628.
[n] P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 401-404. doi:10.18429/JACoW-ICALEPCS2015-MOPGF136
[n] G. L. Xu, G. Lei, L. Wang, Y. L. Zhang, and P. Zhu, “CSNS Timing System Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS028, pp. 386-388.
[n] L. S?©by, D. J. Williams, A. Jansson, and M. Lindroos, “Measurements with the Magnetic Quadrupole Pick-up in the CERN PS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A05, pp. 1744-1746.
[n] R. Sandstrom, D. Huang, and J. Norem, “Study of Radiation From RF Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP106, pp. 805-807.
[n] P. H??lsmann, R. Balss, H. Klingbeil, and U. Laier, “Bunch Compression for FAIR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP023, pp. 864-866.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Jeff, T. Lefevre, and C. P. Welsch, “Off-Axis Undulator Radiation for CLIC Drive Beam Diagnostics”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF10, pp. 228-231.
- P. Van Trappen, E. Carlier, and S. Uyttenhove, “A Fast Interlock Detection System for High-Power Switch Protection”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 367-370.
- H. Jiang, P. Li, and T. G. Xu, “Measurements of Beam Halo by Wire Scanner Monitor”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 393-395.
- D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3621-3623.
- J. W. G. Thomason et al., “The RFQ Test Stand Ion Source at RAL”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI011, pp. 1741-1743.
- M. Boscolo et al., “Machine Detector Interface for the e+e- Future Circular Collider”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 201.
- T. Ieiri et al., “Beam Monitors and Transverse Feedback Systems of TRISTAN Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 729-732.
- A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
- K. Akai et al., “Higher-Order Mode HOM Characteristics of the Choke-Mode Cavity for the KEK B-Factory KEKB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP095L, pp. 2074-2078.
- E. Cavaliere et al., “High Pressure Rinsing Parameters Measurements”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP10, pp. 475-477.
- C. Ohmori et al., “New Cutting Scheme of Magnetic Alloy Cores for J-PARC Synchrotrons”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH128, pp. 1313-1315.
- A. Bosotti, C. Pagani, N. Panzeri, and R. Paparella, “The Coaxial Tuner for ILCTANML at Fermilab”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP146, pp. 895-897.
- A. Uchiyama et al., “Development of Embedded EPICS on F3RP61-2L”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEX03, pp. 145-147.
- W. X. Cheng, B. Bacha, Y. Li, O. Singh, and Y. Tian, “Beam Stability During Top Off Operation at NSLS-II Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 425-427.
- O. Actis, A. Mayor, D. Meer, and D. C. Weber, “Precise Beam Delivery for Proton Therapy with Dynamic Energy Modulation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 540-542.
- A. Solodko et al., “Novel Manufacturing Concepts for 12 GHz High Gradient Accelerating Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3787-3790.
- T. Tanabe, T. Honma, and T. Watanabe, “Electron Cooler at INS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 651-654.
- R. Geller, K. Golovanivsky, and G. Melin, “ECRIPAC: A New Concept for the Production and Acceleration to Very High Energies of Multiply Charged Ions Using an ECR Plasma”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 449-452.
- A. De Franco et al., “Upgrade Study of the MedAustron Ion Beam Center”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4619-4622.
- K. Alrutz-Ziemssen et al., “First Operation of the Superconducting 130 MeV CW-Electron-Accelerator at Darmstadt”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH416, pp. 626-628.
- P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 401-404.
- G. L. Xu, G. Lei, L. Wang, Y. L. Zhang, and P. Zhu, “CSNS Timing System Prototype”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS028, pp. 386-388.
- L. S?©by, D. J. Williams, A. Jansson, and M. Lindroos, “Measurements with the Magnetic Quadrupole Pick-up in the CERN PS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A05, pp. 1744-1746.
- R. Sandstrom, D. Huang, and J. Norem, “Study of Radiation From RF Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP106, pp. 805-807.
- P. H??lsmann, R. Balss, H. Klingbeil, and U. Laier, “Bunch Compression for FAIR”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP023, pp. 864-866.
Back to search