Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Krecic, A. Carniel, E. Karantzoulis, and F. Tripaldi, “Preparations of the Elettra booster for Elettra 2.0”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2988-2990. doi:10.18429/JACoW-IPAC2024-THPC12
[n] C. C. Wilcox, B. Jones, A. Pertica, and R. E. Williamson, “An Investigation into the Behaviour of Residual Gas Ionisation Profile Monitors in the ISIS Extracted Beamline”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 807-810. doi:10.18429/JACoW-IBIC2016-WEPG68
[n] Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
[n] V. Kumar, K.-J. Kim, and D. Li, “Comparison of Codes for Smith-Purcell FEL”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA039, pp. 166-168.
[n] J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2381-2383. doi:10.18429/JACoW-IPAC2018-WEPMF008
[n] L. J. Rybarcyk, “Longitudinal Tracking Studies for the AHF Booster Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE010, pp. 1566-1568.
[n] N. Yu. Kazarinov, G. Gulbekyan, V. I. Kazacha, V. N. Melnikov, and V. I. Mironov, “Scheme for Flattening of Ion Density Distribution on a Target”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN079, pp. 1556-1558.
[n] D. W. Posthuma de Boer and A. Pertica, “Thermal Simulations of Wire Profile Monitors in ISIS Extracted Proton Beamline 1”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 785-787. doi:10.18429/JACoW-IBIC2016-WEPG59
[n] W. Lawson, J. P. Calame, J. Cheng, V. L. Granatstein, P. E. Latham, and M. Reiser, “Experimental Design of 100 MW X-Band and Ku-Band Gyroklystrons (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-35, pp. 448-450.
[n] N. Delerue, J. Barros, M. Vieille Grosjean, O. A. Bezshyyko, and V. Khodnevych, “Study of Phase Reconstruction Techniques applied to Smith-Purcell Radiation Measurements”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3436-3438. doi:10.18429/JACoW-IPAC2014-THPME088
[n] E. W. Nissen, A. Hutton, and A. J. Kimber, “A Harmonic Kicker Scheme for the Circulator Cooler Ring in the Medium Energy Electron-ion Collider”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO078, pp. 1061-1063.
[n] D. C. Plostinar and E. Zh. Sargsyan, “Comparative Study of Beam Dynamics in LINAC4 using CERN and RAL MEBT (Medium Energy Beam Transport) Lines”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN115, pp. 1646-1648.
[n] W. A. Pellico and D. Wildman, “Booster's Coupled Bunch Damper Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB077, pp. 3177-3179.
[n] H. O. Moser et al., “Singapore Synchrotron Light Source-- Helios 2 and Beyond”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF060, pp. 2400-2402.
[n] H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347.
[n] Z.-F. He, D. M. Li, Y. H. Liu, S. L. Wang, J.-L. Zhang, and Y.-T. Zhang, “CW-type HV Power Supply of 50 Hz and its Application in Accelerator Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA018, pp. 699-701.
[n] N. Merminga and K. Y. Ng, “Analytical Expressions for the Smear Due to Nonlinear Multipoles”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1286-1289.
[n] M. Justus et al., “Upgrade of the Machine Interlock System for the ELBE Accelerator Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 469-471. doi:10.18429/JACoW-IPAC2014-MOPME044
[n] M. G. Billing, M. Giannella, R. M. Littauer, and G. R. Rouse, “Interaction of CESR Vacuum Pumps with Stored Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1163-1166.
[n] T. Endo et al., “Fast Betatron Tune Controller for Circulating Beam in a Synchrotron”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D032, pp. 468-470.
[n] N. C. E. Crosland, “Lifetime Studies in Helios 1”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1350-1353.
[n] V. E. Scarpine, A. H. Lumpkin, and G. R. Tassotto, “OTR Imaging of Intense 120 GeV Protons in the NuMI Beamline at FNAL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAC02, pp. 2639-2641.
[n] A. V. Fedotov, R. L. Gluckstern, S. S. Kurennoy, and R. Ryne, “Halo Formation in Spheroidal Bunches with Self-Consistent Stationary Distributions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP15C, pp. 1115-1117.
[n] M. M. Holland and S. E. Metelits, “Final Design and Initial Performance of the Nevis Secondary Beam Channel”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-20, pp. 299-305.
[n] D. Y. Shchegolkov, E. I. Simakov, and A. Zholents, “Simulation Studies of BBU Suppression Methods and Acceptable Tolerances in Dielectric Wakefield Accelerators”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2685-2688. doi:10.18429/JACoW-IPAC2015-WEPJE007
[n] M. E. Schulze et al., “Characterization of the Proton Beam from the 6.7 MeV LEDA RFQ”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA011, pp. 591-593.
[n] R. L. Kustom, J. J. Song, D. M. Grudzien, and H. J. Moe, “Radiation Measurements During Cavities Conditioning on APS RF Test Stand”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2213-2216.
[n] E. Chojnacki et al., “Accelerator Deflection-Mode Dampening Experiments at Argonne”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU451, pp. 447-449.
[n] R. Ferdinand et al., “SPIRAL 2 RFQ Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT076, pp. 2026-2028.
[n] P. Jiang and Y. J. Yuan, “A 5.3 MeV/U, 200MHz APF DTL for Carbon Ions as an Injector of Medical Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO056, pp. 3890-3894.
[n] P. Fernandes, R. Parodi, and A. Schenone, “Design of a Prototype Disk and Washer Structure for a High Intensity Electron Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-11, pp. 550-552.
[n] P. S. Miller, “Status Report on the 500 MeV Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CC-01, pp. 191-195.
[n] V. E. Scarpine, C. W. Lindenmeyer, A. H. Lumpkin, and G. R. Tassotto, “Development of an Optical Transition Radiation Detector for Profile Monitoring of Antiproton and Proton Beams at FNAL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT035, pp. 2381-2383.
[n] Q. Z. Xing et al., “Present Status of the High Current Proton Linac at Tsinghua University and Its Beam Measurements and Applications”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO3AB01, pp. 208-210.
[n] G. N. Kim et al., “Status of Pohang Neutron Facility Based on 100-MeV Electron Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU432, pp. 383-385.
[n] J. A. Carter, “Benchmarking and Calibration of Monte Carlo Vacuum Simulations with SynRad and MolFlow+”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3695-3697. doi:10.18429/JACoW-IPAC2016-THPMY018
[n] H. Nakayama et al., “A Measurement System Using GP-IB for a Magnetic Core Test Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D007, pp. 393-395.
[n] T. Carlisle, J. H. Cobb, and R. R. M. Fletcher, “Ionization Cooling in MICE Step IV”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ036, pp. 877-879.
[n] P. Li et al., “Concept Design of the Collimation System in the CSRm”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH09, pp. 44-47.
[n] J. A. Nolen and P. S. Miller, “Improved Energy Resolution with the MSU Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-08, pp. 249-253.
[n] E. Kako et al., “Development of Superconducting Cavities for High Gradient Applications”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1272-1275.
[n] I. D. Kaganovich, R. C. Davidson, E. P. Lee, S. O, and E. A. Startsev, “Plasma Neutralization Models for Intense Ion Beam Transport in Plasma”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG039, pp. 2975-2977.
[n] H. Reymond, O. O. Andreassen, C. Charrondi?¿re, G. Lehmann Miotto, A. Rijllart, and D. Scannicchio, “Lhc Dipole Magnet Splice Resistance From Sm18 Data Mining”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN007, pp. 98-101.
[n] O. E. Krivosheev, S. Korenev, A. Kolchuzhkin, and I. Tropin, “Distribution of Absorbed Doses in the Materials Irradiated by "Rhodotron" Electron Accelerator: Experiment and Monte Carlo Simulations”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH025, pp. 2500-2502.
[n] A. Faus-Golfe, I. Efthymiopoulos, P. Grafstrom, M. Haguenauer, and M. Rijssenbeek, “A Very High-beta Optics to be used for an Absolute Luminosity Determination with Forward Detectors in ATLAS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT049, pp. 659-661.
[n] T. L. Hart, T. H. Luo, D. J. Summers, and K. Paul, “End-to-End G4Beamline Simulation of an Inverse Cyclotron for Muon Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC046, pp. 238-240.
[n] J. Norem et al., “The Interactions of Surface Damage on RF Cavity Operation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH146, pp. 1361-1363.
[n] R. P. Johnson et al., “Tunable RF Cavities Using Orthogonally Biased Ferrite”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP018, pp. 849-851.
[n] J. Chen et al., “Control System for the Superconducting Wavelength Shifter of SRRC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO005, pp. 2010-2012.
[n] C. Mayer-B?Âricke, “Applications of Cyclotrons in Nuclear Physics (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper G-01, pp. 481-487.
[n] M. Borland, J. A. Carter, H. Cease, and B. K. Stillwell, “Simulation of Gas-Scattering Lifetime using Position- and Species-Dependent Pressure and Aperture Profiles”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 546-548. doi:10.18429/JACoW-IPAC2015-MOPMA008
[n] L. Xiao, C.-K. Ng, J. E. Dey, I. Kourbanis, and Z. Qian, “Simulation and Optimization of Project-X Main Injector Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP187, pp. 1840-1842.
[n] S. Ahmed et al., “High Power Test of RF Separator For 12 GeV Upgrade of CEBAF at Jefferson Lab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR030, pp. 4032-4034.
[n] N. Nakamura, “Review of ERL Projects at KEK and Around the World”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUXB02, pp. 1040-1044.
[n] F. Naito et al., “New Engineering Techniques used in a High-Power Model of the 432 MHz DTL”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-36, pp. 134-136.
[n] S. Krecic, A. Carniel, and F. Tripaldi, “Emittance reduction of the actual Booster for Elettra2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3155-3157. doi:10.18429/JACoW-IPAC2023-WEPL022
[n] H. Jaeckle, F. Jenni, and X. H. Ke, “Practical Experience with Self-optimizing, High Dynamic Control of Accelerator Magnet Power Supplies”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO011, pp. 3355-3357.
[n] A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127.
[n] D. Huang et al., “RF Studies at Fermilab MuCool Test Area”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP032, pp. 888-890.
[n] R. Racz et al., “Application of an ECR Ion Source for Ionic Functionalization of Implant Materials on the Nanoscale”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH02, pp. 135-139.
[n] S. H. Liu, Y. He, and Z. J. Wang, “DESIGN STUDIES OF THE C-ADS MAIN LINAC WITH ONLY SPOKE CAVITIES”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA025, pp. 1781-1783.
[n] S. Henderson et al., “SNS Beam Commisioning Status”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT168, pp. 1524-1526.
[n] Y. Lei, X. Guan, R. Tang, X. W. Wang, Q. Z. Xing, and S. X. Zheng, “Experimental Study of Tuning Method on a Model Alvarez DTL Cavity for CPHS Project”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 756-758. doi:10.18429/JACoW-LINAC2018-THPO034
[n] M. A. Tiunov et al., “5-10 MEV Industrial High Power Electron Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO039, pp. 2813-2815.
[n] H. Qin, R. C. Davidson, and E. A. Startsev, “Delta-f Simulation Studies of the Ion-Electron Two-Stream Instability in IBX”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB052, pp. 3120-3122.
[n] J. T. Seeman et al., “Summary of the Emittance Control in the SLC Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2064-2067.
[n] M. Aiba et al., “Study of Acceptance of FFAG Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE063, pp. 1226-1228.
[n] M.-S. Yeh, L. H. Chang, K.-T. Hsu, M.-C. Lin, G.-H. Luo, and Ch. E. Wang, “Electronic System for Superconducting RF Module at the Synchrotron Radiation Research Center”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO034, pp. 2295-2297.
[n] G. Hemmie et al., “Design, Construction and Performance of the DESY II Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3625-3628.
[n] M. A. Plum et al., “SNS Ring Commissioning Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH131, pp. 351-353.
[n] B. E. Carlsten, G. R. Magelssen, B. D. McVey, L. M. Young, and E. M. Svaton, “Magnetic Bunchers for the Generation of High Peak Current, Low Emittance Electron Pulses at Medium Energy”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH421, pp. 641-643.
[n] A. W. Davidson et al., “Numerical Study of Self and Controlled Injection in 3-Dimensional Laser-Driven Wakefields”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP101, pp. 286-288.
[n] W. L. Chen et al., “CIADS Normal Temperature Front-End Design”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 267-270. doi:10.18429/JACoW-LINAC2016-MOPLR060
For LaTeX
Use Complete Form
For BibTeX
References
- S. Krecic, A. Carniel, E. Karantzoulis, and F. Tripaldi, “Preparations of the Elettra booster for Elettra 2.0”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC12, pp. 2988-2990.
- C. C. Wilcox, B. Jones, A. Pertica, and R. E. Williamson, “An Investigation into the Behaviour of Residual Gas Ionisation Profile Monitors in the ISIS Extracted Beamline”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 807-810.
- Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
- V. Kumar, K.-J. Kim, and D. Li, “Comparison of Codes for Smith-Purcell FEL”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA039, pp. 166-168.
- J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2381-2383.
- L. J. Rybarcyk, “Longitudinal Tracking Studies for the AHF Booster Synchrotron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE010, pp. 1566-1568.
- N. Yu. Kazarinov, G. Gulbekyan, V. I. Kazacha, V. N. Melnikov, and V. I. Mironov, “Scheme for Flattening of Ion Density Distribution on a Target”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN079, pp. 1556-1558.
- D. W. Posthuma de Boer and A. Pertica, “Thermal Simulations of Wire Profile Monitors in ISIS Extracted Proton Beamline 1”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 785-787.
- W. Lawson, J. P. Calame, J. Cheng, V. L. Granatstein, P. E. Latham, and M. Reiser, “Experimental Design of 100 MW X-Band and Ku-Band Gyroklystrons (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-35, pp. 448-450.
- N. Delerue, J. Barros, M. Vieille Grosjean, O. A. Bezshyyko, and V. Khodnevych, “Study of Phase Reconstruction Techniques applied to Smith-Purcell Radiation Measurements”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3436-3438.
- E. W. Nissen, A. Hutton, and A. J. Kimber, “A Harmonic Kicker Scheme for the Circulator Cooler Ring in the Medium Energy Electron-ion Collider”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO078, pp. 1061-1063.
- D. C. Plostinar and E. Zh. Sargsyan, “Comparative Study of Beam Dynamics in LINAC4 using CERN and RAL MEBT (Medium Energy Beam Transport) Lines”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN115, pp. 1646-1648.
- W. A. Pellico and D. Wildman, “Booster's Coupled Bunch Damper Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB077, pp. 3177-3179.
- H. O. Moser et al., “Singapore Synchrotron Light Source-- Helios 2 and Beyond”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF060, pp. 2400-2402.
- H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347.
- Z.-F. He, D. M. Li, Y. H. Liu, S. L. Wang, J.-L. Zhang, and Y.-T. Zhang, “CW-type HV Power Supply of 50 Hz and its Application in Accelerator Power Supply”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA018, pp. 699-701.
- N. Merminga and K. Y. Ng, “Analytical Expressions for the Smear Due to Nonlinear Multipoles”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1286-1289.
- M. Justus et al., “Upgrade of the Machine Interlock System for the ELBE Accelerator Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 469-471.
- M. G. Billing, M. Giannella, R. M. Littauer, and G. R. Rouse, “Interaction of CESR Vacuum Pumps with Stored Beam”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1163-1166.
- T. Endo et al., “Fast Betatron Tune Controller for Circulating Beam in a Synchrotron”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D032, pp. 468-470.
- N. C. E. Crosland, “Lifetime Studies in Helios 1”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1350-1353.
- V. E. Scarpine, A. H. Lumpkin, and G. R. Tassotto, “OTR Imaging of Intense 120 GeV Protons in the NuMI Beamline at FNAL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAC02, pp. 2639-2641.
- A. V. Fedotov, R. L. Gluckstern, S. S. Kurennoy, and R. Ryne, “Halo Formation in Spheroidal Bunches with Self-Consistent Stationary Distributions”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP15C, pp. 1115-1117.
- M. M. Holland and S. E. Metelits, “Final Design and Initial Performance of the Nevis Secondary Beam Channel”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-20, pp. 299-305.
- D. Y. Shchegolkov, E. I. Simakov, and A. Zholents, “Simulation Studies of BBU Suppression Methods and Acceptable Tolerances in Dielectric Wakefield Accelerators”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2685-2688.
- M. E. Schulze et al., “Characterization of the Proton Beam from the 6.7 MeV LEDA RFQ”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPA011, pp. 591-593.
- R. L. Kustom, J. J. Song, D. M. Grudzien, and H. J. Moe, “Radiation Measurements During Cavities Conditioning on APS RF Test Stand”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2213-2216.
- E. Chojnacki et al., “Accelerator Deflection-Mode Dampening Experiments at Argonne”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU451, pp. 447-449.
- R. Ferdinand et al., “SPIRAL 2 RFQ Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT076, pp. 2026-2028.
- P. Jiang and Y. J. Yuan, “A 5.3 MeV/U, 200MHz APF DTL for Carbon Ions as an Injector of Medical Synchrotron”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO056, pp. 3890-3894.
- P. Fernandes, R. Parodi, and A. Schenone, “Design of a Prototype Disk and Washer Structure for a High Intensity Electron Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-11, pp. 550-552.
- P. S. Miller, “Status Report on the 500 MeV Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CC-01, pp. 191-195.
- V. E. Scarpine, C. W. Lindenmeyer, A. H. Lumpkin, and G. R. Tassotto, “Development of an Optical Transition Radiation Detector for Profile Monitoring of Antiproton and Proton Beams at FNAL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT035, pp. 2381-2383.
- Q. Z. Xing et al., “Present Status of the High Current Proton Linac at Tsinghua University and Its Beam Measurements and Applications”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO3AB01, pp. 208-210.
- G. N. Kim et al., “Status of Pohang Neutron Facility Based on 100-MeV Electron Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU432, pp. 383-385.
- J. A. Carter, “Benchmarking and Calibration of Monte Carlo Vacuum Simulations with SynRad and MolFlow+”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3695-3697.
- H. Nakayama et al., “A Measurement System Using GP-IB for a Magnetic Core Test Cavity”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D007, pp. 393-395.
- T. Carlisle, J. H. Cobb, and R. R. M. Fletcher, “Ionization Cooling in MICE Step IV”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ036, pp. 877-879.
- P. Li et al., “Concept Design of the Collimation System in the CSRm”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPH09, pp. 44-47.
- J. A. Nolen and P. S. Miller, “Improved Energy Resolution with the MSU Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-08, pp. 249-253.
- E. Kako et al., “Development of Superconducting Cavities for High Gradient Applications”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1272-1275.
- I. D. Kaganovich, R. C. Davidson, E. P. Lee, S. O, and E. A. Startsev, “Plasma Neutralization Models for Intense Ion Beam Transport in Plasma”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG039, pp. 2975-2977.
- H. Reymond, O. O. Andreassen, C. Charrondi?¿re, G. Lehmann Miotto, A. Rijllart, and D. Scannicchio, “Lhc Dipole Magnet Splice Resistance From Sm18 Data Mining”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN007, pp. 98-101.
- O. E. Krivosheev, S. Korenev, A. Kolchuzhkin, and I. Tropin, “Distribution of Absorbed Doses in the Materials Irradiated by "Rhodotron" Electron Accelerator: Experiment and Monte Carlo Simulations”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH025, pp. 2500-2502.
- A. Faus-Golfe, I. Efthymiopoulos, P. Grafstrom, M. Haguenauer, and M. Rijssenbeek, “A Very High-beta Optics to be used for an Absolute Luminosity Determination with Forward Detectors in ATLAS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT049, pp. 659-661.
- T. L. Hart, T. H. Luo, D. J. Summers, and K. Paul, “End-to-End G4Beamline Simulation of an Inverse Cyclotron for Muon Cooling”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC046, pp. 238-240.
- J. Norem et al., “The Interactions of Surface Damage on RF Cavity Operation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH146, pp. 1361-1363.
- R. P. Johnson et al., “Tunable RF Cavities Using Orthogonally Biased Ferrite”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP018, pp. 849-851.
- J. Chen et al., “Control System for the Superconducting Wavelength Shifter of SRRC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO005, pp. 2010-2012.
- C. Mayer-B?Âricke, “Applications of Cyclotrons in Nuclear Physics (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper G-01, pp. 481-487.
- M. Borland, J. A. Carter, H. Cease, and B. K. Stillwell, “Simulation of Gas-Scattering Lifetime using Position- and Species-Dependent Pressure and Aperture Profiles”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 546-548.
- L. Xiao, C.-K. Ng, J. E. Dey, I. Kourbanis, and Z. Qian, “Simulation and Optimization of Project-X Main Injector Cavity”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP187, pp. 1840-1842.
- S. Ahmed et al., “High Power Test of RF Separator For 12 GeV Upgrade of CEBAF at Jefferson Lab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR030, pp. 4032-4034.
- N. Nakamura, “Review of ERL Projects at KEK and Around the World”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUXB02, pp. 1040-1044.
- F. Naito et al., “New Engineering Techniques used in a High-Power Model of the 432 MHz DTL”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-36, pp. 134-136.
- S. Krecic, A. Carniel, and F. Tripaldi, “Emittance reduction of the actual Booster for Elettra2.0”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL022, pp. 3155-3157.
- H. Jaeckle, F. Jenni, and X. H. Ke, “Practical Experience with Self-optimizing, High Dynamic Control of Accelerator Magnet Power Supplies”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO011, pp. 3355-3357.
- A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127.
- D. Huang et al., “RF Studies at Fermilab MuCool Test Area”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP032, pp. 888-890.
- R. Racz et al., “Application of an ECR Ion Source for Ionic Functionalization of Implant Materials on the Nanoscale”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH02, pp. 135-139.
- S. H. Liu, Y. He, and Z. J. Wang, “DESIGN STUDIES OF THE C-ADS MAIN LINAC WITH ONLY SPOKE CAVITIES”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA025, pp. 1781-1783.
- S. Henderson et al., “SNS Beam Commisioning Status”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT168, pp. 1524-1526.
- Y. Lei, X. Guan, R. Tang, X. W. Wang, Q. Z. Xing, and S. X. Zheng, “Experimental Study of Tuning Method on a Model Alvarez DTL Cavity for CPHS Project”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 756-758.
- M. A. Tiunov et al., “5-10 MEV Industrial High Power Electron Accelerator”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO039, pp. 2813-2815.
- H. Qin, R. C. Davidson, and E. A. Startsev, “Delta-f Simulation Studies of the Ion-Electron Two-Stream Instability in IBX”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB052, pp. 3120-3122.
- J. T. Seeman et al., “Summary of the Emittance Control in the SLC Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2064-2067.
- M. Aiba et al., “Study of Acceptance of FFAG Accelerator”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE063, pp. 1226-1228.
- M.-S. Yeh, L. H. Chang, K.-T. Hsu, M.-C. Lin, G.-H. Luo, and Ch. E. Wang, “Electronic System for Superconducting RF Module at the Synchrotron Radiation Research Center”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO034, pp. 2295-2297.
- G. Hemmie et al., “Design, Construction and Performance of the DESY II Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3625-3628.
- M. A. Plum et al., “SNS Ring Commissioning Results”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH131, pp. 351-353.
- B. E. Carlsten, G. R. Magelssen, B. D. McVey, L. M. Young, and E. M. Svaton, “Magnetic Bunchers for the Generation of High Peak Current, Low Emittance Electron Pulses at Medium Energy”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH421, pp. 641-643.
- A. W. Davidson et al., “Numerical Study of Self and Controlled Injection in 3-Dimensional Laser-Driven Wakefields”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP101, pp. 286-288.
- W. L. Chen et al., “CIADS Normal Temperature Front-End Design”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 267-270.
Back to search