Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. A. Harrison et al., “Further Analysis of Corrugated Plate Dechirper Experiment at BNL-ATF”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP034, pp. 788-789.
[n] N. Ueda et al., “An RFQ Linac for Heavy Ion Acceleration”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H14, pp. 299-301.
[n] L. Tosi, C. Knapic, and D. Zangrando, “The ELETTRA Superconducting Wiggler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF039, pp. 390-392.
[n] M. Nomura et al., “Impedance Measurements of MA Loaded RF Cavities in J-PARC Synchrotrons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP002, pp. 1985-1987.
[n] J. Arje et al., “Development of RIKEN 18 GHz ECRIS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP016L, pp. 1478-1480.
[n] Y. Thurel, B. Favre, and D. Nisbet, “Four Quadrant 120 A, 10 V Power Converters for LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN082, pp. 347-349.
[n] A. Lombardi et al., “Helium Gas Evacuation in Superconducting RFQ Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA107, pp. 1324-1326.
[n] A. Pazos, P. Duval, S. Fiedler, and U. R. Ristau, “An Embedded Distributed System Based on TINE and Windows CE”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEX04, pp. 148-150.
[n] T. Kramer, B. Goddard, M. Gyr, A. Koschik, J. A. Uythoven, and Th. Weiler, “Apertures in the LHC Beam Dump System and Beam Losses during Beam Abort”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP064, pp. 2665-2667.
[n] L. Serafini, S. Gustafsson, and C. Pagani, “Electromagnetic Calculations for an Improved Design of the Milan K800 Cyclotron RF Cavities”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-10, pp. 365-369.
[n] A. Gallo et al., “Proposal of a Strong RF Focusing Experiment at DAFNE”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT057, pp. 683-685.
[n] R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
[n] S. Bai et al., “Beam Waist Manipulations at the ATF2 Interaction Point”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP024, pp. 3747-3749.
[n] Y. Watanabe et al., “RIKEN Ring Cyclotron (RRC)”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA09, pp. 54-57.
[n] G. Y. Hsiung et al., “Operation Experiences for the 1.5 GeV TLS Ultra-High Vacuum System”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16037, pp. XX-XX.
[n] R. L. Madrak and D. Wildman, “Design and High Power Testing of 52.809 MHz RF Cavities for Slip Stacking in the Fermilab Recycler”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA13, pp. 1010-1012.
[n] F. Banfi et al., “Monte Carlo Transverse Emittance Study on Cs2Te”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP046, pp. XX-XX.
[n] P. Chen, M. Lundquist, and D. Yu, “Experiments on Voltage Droop Compensation for High Power Marx Modulators”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP130, pp. 1076-1078.
[n] R. Baer and F. Ameil, “Managing the FAIR Control System Development”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO201, pp. 135-137.
[n] A. Young, “Low Phase-Noise, Low Jitter Master Oscillator for the LCLS Cavity BPM System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP097, pp. 4180-4182.
[n] K. Thomsen, “Visual Monitor for Near-Target Beam Diagnostics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP015, pp. 3982-3983.
[n] S. Jenzer et al., “Study of the Suitability of 3D Printing for Ultra-High Vacuum Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3356-3358. doi:10.18429/JACoW-IPAC2017-WEPVA043
[n] M. Misiowiec, W. Buczak, and M. Buttner, “Towards High Performance Processing in Modern Java Based Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST02, pp. 1322-1325.
[n] J. A. Clarke et al., “Optimization of Superconducting Undulators for Low Repetition Rate FELs”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 411-414. doi:10.18429/JACoW-FEL2017-WEC02
[n] G. Andonian, S. Reiche, and M. Ruelas, “A User-Friendly Code to Model Radiation of High Brightness Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP066, pp. 4464-4466.
[n] B. F. Milton and H. G. Blosser, “Orbit Properties Relevant to Phase Selection in the MSU K500 Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2617-2620.
[n] D. Jacquet, J. C. Bau, and I. Kozsar, “The LHC Injection Sequencer”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC105, pp. 1307-1310.
[n] A. V. Burov, “Dancing Bunches as van Kampen Modes”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODS4, pp. 94-96.
[n] G. Shirkov et al., “Hadron Therapy Research and Applications at JINR”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 123-127. doi:10.18429/JACoW-RUPAC2016-THYMH02
[n] M. C. Lin, L. H. Chang, G. H. Luo, Ch. Wang, and M. K. Yeh, “Effects of Material Properties on Resonance Frequency of a CESR-III Type 500 MHz SRF Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB073, pp. 1371-1373.
[n] F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
[n] K. Bongardt, S. Martin, P. F. M. Meads, D. Prasuhn, H. Stockhorst, and R. Wagner, “Optical Flexibility of the COSY-Juelich Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1379-1382.
[n] D. E. Donets et al., “Simulation and Design of Tubular Electron String Ion Source”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-02, pp. 321-325.
[n] S. Maury et al., “Ions for LHC: Beam Physics and Engineering Challenges”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE005, pp. 946-948.
[n] A. Bortniansky et al., “Analytical Complexes for Ion Beam Analysis and Modification of Materials in St. Petersburg and Bratislava”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP033G, pp. 2696-2698.
[n] J. M. Mueller et al., “Large-Scale Optical Synchronization System of the European XFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 253-256. doi:10.18429/JACoW-LINAC2018-MOPO121
[n] Z. Zhao, T. R. Bieler, D. Kang, and C. Compton, “An Investigation of Correlations Between Mechanical and Microstructural Properties of High Purity Polycrystalline Niobium”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB054, pp. 219-222.
[n] T. Hakulinen, P. Ninin, R. Nunes, and T. R. Riesco, “Revisiting CERN Safety System Monitoring (SSM)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC055, pp. 218-221.
[n] C. Papadopoulos, I. Haber, R. A. Kishek, P. G. O, and M. Reiser, “Simulation Studies of Halo Creation and Regeneration in Intense Charged Particle Beams”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA11, pp. 78-80.
[n] R. Catherall, T. J. Giles, and G. Neyens, “Exploiting the Potential of ISOLDE at CERN (the EPIC Project)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3706-3708. doi:10.18429/JACoW-IPAC2019-THPGW053
[n] J. S. Eldred and A. Valishev, “Simulation of Integrable Synchrotron with Space-charge and Chromatic Tune-shifts”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 894-897. doi:10.18429/JACoW-IPAC2018-TUPAF073
[n] S. U. De Silva, J. R. Delayen, V. S. Morozov, H. Park, and S. Sosa, “Analysis of Higher Order Multipoles of the 952.6 Mhz RF-Dipole Crabbing Cavity for the Jefferson Lab Electron-Ion Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2996-2998. doi:10.18429/JACoW-IPAC2019-WEPRB076
[n] H.-D. Nuhn et al., “A Longitudinal Multibunch Feedback System for PEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1410-1413.
[n] E. Levichev and V. Sajaev, “Nonlinear Beam Behaviour Study Using Lie Transforms”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 902-905.
[n] T.-S. Ueng, A. Chao, C.-C. Kuo, and H.-J. Tsai, “Computer Simulation of Equilibrium Electron Beam Distribution in the Proximity of 4th Order Single Nonlinear Resonance”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT121, pp. 2137-2139.
[n] R. P. Johnson, R. J. Abrams, M. A. Cummings, J. D. Lobo, M. Popovic, and T. J. Roberts, “Mu*STAR: A Modular Accelerator-Driven Subcritical Reactor Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3555-3557. doi:10.18429/JACoW-IPAC2019-THPMP048
[n] B. Haerer et al., “Constraints on the FCC-ee Lattice from the Compatibility with the FCC Hadron Collider”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT2A1, pp. 87-90.
[n] G. Jackson et al., “Results from Longitudinal Impedance Measurements in the Fermilab Tevatron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1749-1752.
[n] T. Hoffmann et al., “A New DAQ Installation for the SIS18 Beam Position Monitoring System at GSI”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP047, pp. 759-761.
[n] R. P. Fliller et al., “Alternative Injection Schemes to the NSLS-II Using Nonlinear Injection Magnets”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 91-94. doi:10.18429/JACoW-NAPAC2019-MOPLM01
[n] W. X. Cheng, A. Blednykh, S. Krinsky, and O. Singh, “Stripline Kicker Design for NSLS2 Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP266, pp. 603-605.
[n] T. Kikuchi, K. Horioka, T. Katayama, and S. Kawata, “Application of Selected Momentum Correction Method Using Induction Voltage Modulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT043, pp. 2762-2764.
[n] J. Pasternak et al., “Design of LhARA - Laser Hybrid Accelerator for Radiobiological Applications”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3578-3580. doi:10.18429/JACoW-IPAC2019-THPGW001
[n] E. Bressi, C. Biscari, and M. Pullia, “Status Report on the Centro Nazionale di Adroterapia Oncologica (CNAO)”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP005, pp. 1297-1299.
For LaTeX
Use Complete Form
For BibTeX
References
- M. A. Harrison et al., “Further Analysis of Corrugated Plate Dechirper Experiment at BNL-ATF”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP034, pp. 788-789.
- N. Ueda et al., “An RFQ Linac for Heavy Ion Acceleration”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H14, pp. 299-301.
- L. Tosi, C. Knapic, and D. Zangrando, “The ELETTRA Superconducting Wiggler”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF039, pp. 390-392.
- M. Nomura et al., “Impedance Measurements of MA Loaded RF Cavities in J-PARC Synchrotrons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP002, pp. 1985-1987.
- J. Arje et al., “Development of RIKEN 18 GHz ECRIS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP016L, pp. 1478-1480.
- Y. Thurel, B. Favre, and D. Nisbet, “Four Quadrant 120 A, 10 V Power Converters for LHC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN082, pp. 347-349.
- A. Lombardi et al., “Helium Gas Evacuation in Superconducting RFQ Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA107, pp. 1324-1326.
- A. Pazos, P. Duval, S. Fiedler, and U. R. Ristau, “An Embedded Distributed System Based on TINE and Windows CE”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEX04, pp. 148-150.
- T. Kramer, B. Goddard, M. Gyr, A. Koschik, J. A. Uythoven, and Th. Weiler, “Apertures in the LHC Beam Dump System and Beam Losses during Beam Abort”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP064, pp. 2665-2667.
- L. Serafini, S. Gustafsson, and C. Pagani, “Electromagnetic Calculations for an Improved Design of the Milan K800 Cyclotron RF Cavities”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-10, pp. 365-369.
- A. Gallo et al., “Proposal of a Strong RF Focusing Experiment at DAFNE”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT057, pp. 683-685.
- R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
- S. Bai et al., “Beam Waist Manipulations at the ATF2 Interaction Point”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP024, pp. 3747-3749.
- Y. Watanabe et al., “RIKEN Ring Cyclotron (RRC)”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA09, pp. 54-57.
- G. Y. Hsiung et al., “Operation Experiences for the 1.5 GeV TLS Ultra-High Vacuum System”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16037, pp. XX-XX.
- R. L. Madrak and D. Wildman, “Design and High Power Testing of 52.809 MHz RF Cavities for Slip Stacking in the Fermilab Recycler”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA13, pp. 1010-1012.
- F. Banfi et al., “Monte Carlo Transverse Emittance Study on Cs2Te”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP046, pp. XX-XX.
- P. Chen, M. Lundquist, and D. Yu, “Experiments on Voltage Droop Compensation for High Power Marx Modulators”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP130, pp. 1076-1078.
- R. Baer and F. Ameil, “Managing the FAIR Control System Development”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO201, pp. 135-137.
- A. Young, “Low Phase-Noise, Low Jitter Master Oscillator for the LCLS Cavity BPM System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP097, pp. 4180-4182.
- K. Thomsen, “Visual Monitor for Near-Target Beam Diagnostics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP015, pp. 3982-3983.
- S. Jenzer et al., “Study of the Suitability of 3D Printing for Ultra-High Vacuum Applications”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3356-3358.
- M. Misiowiec, W. Buczak, and M. Buttner, “Towards High Performance Processing in Modern Java Based Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMUST02, pp. 1322-1325.
- J. A. Clarke et al., “Optimization of Superconducting Undulators for Low Repetition Rate FELs”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 411-414.
- G. Andonian, S. Reiche, and M. Ruelas, “A User-Friendly Code to Model Radiation of High Brightness Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP066, pp. 4464-4466.
- B. F. Milton and H. G. Blosser, “Orbit Properties Relevant to Phase Selection in the MSU K500 Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2617-2620.
- D. Jacquet, J. C. Bau, and I. Kozsar, “The LHC Injection Sequencer”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC105, pp. 1307-1310.
- A. V. Burov, “Dancing Bunches as van Kampen Modes”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOODS4, pp. 94-96.
- G. Shirkov et al., “Hadron Therapy Research and Applications at JINR”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 123-127.
- M. C. Lin, L. H. Chang, G. H. Luo, Ch. Wang, and M. K. Yeh, “Effects of Material Properties on Resonance Frequency of a CESR-III Type 500 MHz SRF Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB073, pp. 1371-1373.
- F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
- K. Bongardt, S. Martin, P. F. M. Meads, D. Prasuhn, H. Stockhorst, and R. Wagner, “Optical Flexibility of the COSY-Juelich Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1379-1382.
- D. E. Donets et al., “Simulation and Design of Tubular Electron String Ion Source”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper E-02, pp. 321-325.
- S. Maury et al., “Ions for LHC: Beam Physics and Engineering Challenges”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE005, pp. 946-948.
- A. Bortniansky et al., “Analytical Complexes for Ion Beam Analysis and Modification of Materials in St. Petersburg and Bratislava”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP033G, pp. 2696-2698.
- J. M. Mueller et al., “Large-Scale Optical Synchronization System of the European XFEL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 253-256.
- Z. Zhao, T. R. Bieler, D. Kang, and C. Compton, “An Investigation of Correlations Between Mechanical and Microstructural Properties of High Purity Polycrystalline Niobium”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB054, pp. 219-222.
- T. Hakulinen, P. Ninin, R. Nunes, and T. R. Riesco, “Revisiting CERN Safety System Monitoring (SSM)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC055, pp. 218-221.
- C. Papadopoulos, I. Haber, R. A. Kishek, P. G. O, and M. Reiser, “Simulation Studies of Halo Creation and Regeneration in Intense Charged Particle Beams”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA11, pp. 78-80.
- R. Catherall, T. J. Giles, and G. Neyens, “Exploiting the Potential of ISOLDE at CERN (the EPIC Project)”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3706-3708.
- J. S. Eldred and A. Valishev, “Simulation of Integrable Synchrotron with Space-charge and Chromatic Tune-shifts”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 894-897.
- S. U. De Silva, J. R. Delayen, V. S. Morozov, H. Park, and S. Sosa, “Analysis of Higher Order Multipoles of the 952.6 Mhz RF-Dipole Crabbing Cavity for the Jefferson Lab Electron-Ion Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2996-2998.
- H.-D. Nuhn et al., “A Longitudinal Multibunch Feedback System for PEP”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1410-1413.
- E. Levichev and V. Sajaev, “Nonlinear Beam Behaviour Study Using Lie Transforms”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 902-905.
- T.-S. Ueng, A. Chao, C.-C. Kuo, and H.-J. Tsai, “Computer Simulation of Equilibrium Electron Beam Distribution in the Proximity of 4th Order Single Nonlinear Resonance”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT121, pp. 2137-2139.
- R. P. Johnson, R. J. Abrams, M. A. Cummings, J. D. Lobo, M. Popovic, and T. J. Roberts, “Mu*STAR: A Modular Accelerator-Driven Subcritical Reactor Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3555-3557.
- B. Haerer et al., “Constraints on the FCC-ee Lattice from the Compatibility with the FCC Hadron Collider”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT2A1, pp. 87-90.
- G. Jackson et al., “Results from Longitudinal Impedance Measurements in the Fermilab Tevatron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1749-1752.
- T. Hoffmann et al., “A New DAQ Installation for the SIS18 Beam Position Monitoring System at GSI”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP047, pp. 759-761.
- R. P. Fliller et al., “Alternative Injection Schemes to the NSLS-II Using Nonlinear Injection Magnets”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 91-94.
- W. X. Cheng, A. Blednykh, S. Krinsky, and O. Singh, “Stripline Kicker Design for NSLS2 Storage Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP266, pp. 603-605.
- T. Kikuchi, K. Horioka, T. Katayama, and S. Kawata, “Application of Selected Momentum Correction Method Using Induction Voltage Modulator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT043, pp. 2762-2764.
- J. Pasternak et al., “Design of LhARA - Laser Hybrid Accelerator for Radiobiological Applications”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3578-3580.
- E. Bressi, C. Biscari, and M. Pullia, “Status Report on the Centro Nazionale di Adroterapia Oncologica (CNAO)”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP005, pp. 1297-1299.
Back to search