Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Kaji, M. Hirose, Y. Iitsuka, and T. Obina, “Archive System of Beam Injection Information at SuperKEKB”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2550-2553. doi:10.18429/JACoW-IPAC2019-WEPGW036
[n] W. B. Sampson, K. E. Robins, and M. G. Thomas, “Magnetoresistance Elements for the Measurement and Control of Harmonics in Superconducting Accelerator Magnets”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1157-1160.
[n] J. Rathlev, M. R. Clausen, J. Hatje, and H. R. Rickens, “A Framework for Authentication and Authorization in Plug-in-Based Control System Software”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP015, pp. 123-124.
[n] R. K. Bhandari and A. S. Divatia, “Design Aspects of an External Injection System for VEC, Calcutta”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B41, pp. 165-168.
[n] B. Berkes and D. Brombach, “Magnet System of the SIN Ring Injector Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-13, pp. 191-192.
[n] A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “Material Studies for the ISIS Muon Target”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA077, pp. 253-255.
[n] V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1367-1370. doi:10.18429/JACoW-IPAC2016-TUPMR050
[n] E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568.
[n] C. Pagani, E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Design Considerations of a MW-Scale, High-Efficiency, Industrial-Use, Ultraviolet FEL Amplifier”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B12, pp. 773-775.
[n] E. L. Saldin, V. P. Sarantsev, E. A. Schneidmiller, S. S. Shimanskii, Yu. Ulyanov, and M. V. Yurkov, “On a Possibility to Construct High-Intensity Monochromatic Gamma-Source at HERA and LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 834-837.
[n] M. T. Lynch, D. Keffeler, D. Rees, W. Roybal, and J. Sheikh, “Installation and Test Results of a High-Power, CW Klystrode Amplifier at Los Alamos National Laboratory”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-37, pp. 451-453.
[n] Z. Zhang, A. Loulergue, F. Marteau, T. Mutin, L. Nadolski, and V. Pinty, “Towards nonlinear modeling of the combined sextupole-corrector magnets at SOLEIL II”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2029, unpublished.
[n] J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
[n] W.-D. M?Âller, “Input Couplers for Superconducting Cavities - Design and Test”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper SUA03, pp. 20-20.
[n] J. Sekutowicz, A. Goessel, G. Kreps, and S. Zheng, “Active HOMs Excitation in the First Prototype of Superstructure”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB084, pp. 1392-1394.
[n] S. S. Gilardoni, S. Aumon, and M. Martini, “Study of Beam Losses at Transition Crossing at the CERN PS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC048, pp. 3086-3088.
[n] M. J. Tannenbaum, A. K. Ghosh, K. E. Robins, and W. B. Sampson, “Magnetic Properties of the Iron Laminations for CBA Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3472-3475.
[n] C. M. Celata, A. Faltens, D. L. Judd, L. Smith, and M. G. Tiefenback, “Transverse Combining of Nonrelativistic Beams in a Multiple Beam Induction Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1167-1170.
[n] A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
[n] R. Benaroya, T. H. Blewitt, J. M. Brooks, and C. Laverick, “Effect of Fast Neutron Irradiation at Low Temperature on NbZr Coil Performance”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 383-386.
[n] A. Gilfellon, R. M. Jones, B. Muratori, A. Wheelhouse, and P. Williams, “Beam Dynamics Tracking Simulations for UK XFEL Under the Influence of Long-Range Dipole Wakefields”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2085, unpublished.
[n] S. Kurennoy, J. Jason, and L. Krawczyk, “Development of a Fast Traveling-Wave Beam Chopper for National Spallation Neutron Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P053, pp. 3731-3733.
[n] M. Modena, A. V. Aloev, E. Solodko, P. A. Thonet, and A. S. Vorozhtsov, “Status of CLIC Magnets Studies and R&D”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1350-1353. doi:10.18429/JACoW-IPAC2014-TUPME007
[n] S. Kato, H. Harada, H. Hotchi, M. Kinsho, and K. Okabe, “Development of the New Measurement Method for the Incoherent Tune Spread and the Tune Shift Caused by the Space Charge Effect”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME020, pp. 512-514.
[n] J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183.
[n] V. Zubko et al., “HTS Current Lead Optimization”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE007, pp. 2454-2456.
[n] S. Russenschuck et al., “Challenges for the Magnet System of LHeC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR075, pp. 1996-1998.
[n] I. V. Leitao, “Development, Validation and Application of a Novel Method for Estimating the Thermal Conductance of Critical Interfaces in the Jaws of the LHC Collimation System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI060, pp. 3430-3432.
[n] T. H. Fields and C. Laverick, “Some Supermagnet Design Considerations”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 362-367.
[n] I. I. Degtyarev et al., “Verification of Modern Evaluated Nuclear Data Libraries on the Basis of Integral Experiments Using the RTS&T Code System”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 401-403. doi:10.18429/JACoW-RUPAC2018-WEPSB58
[n] D. L. Judd, “General Discussion B”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A13, pp. 57-58.
[n] A. Beckmann, “Automated Verification Environment for TwinCAT PLC Programs”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC082, pp. 288-291.
[n] A. A. Pryanichnikov et al., “Numerical Modeling and Development of the Prototype of the Bragg Peak Position Detector Working in Real Time Mode for Hadron Therapy Facilities”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 220-221. doi:10.18429/JACoW-RUPAC2018-TUPSA34
[n] I. Vasserman, B. Berkes, J. Kvitkovitc, and J. Z. Xu, “Compensation of the Planar Hall Effect Voltage Using a New Two-Sensor Hall Probe Design”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP062, pp. 2404-2406.
[n] M. R. Clausen et al., “RF Heat Load Compensation for the European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 348-351. doi:10.18429/JACoW-ICALEPCS2017-TUMPA06
[n] E. Wang, J. Biswas, and Q. Wu, “Preinjector Design Update for the EIC”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1354, unpublished.
[n] A. Bungau, R. Cywinski, R. J. Barlow, C. Bungau, P. J. C. King, and J. S. Lord, “GEANT4 Modelling of Heat Deposition into the ISIS Muon Target”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP004, pp. 814-816.
[n] C. Torregrosa et al., “The Hiradmat 27 Experiment: Exploring High-Density Materials Response at Extreme Conditions for Antiproton Production”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3705-3708. doi:10.18429/JACoW-IPAC2016-THPMY023
[n] G. Gurov, “UNK Status and Plans”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG06, pp. 416-419.
[n] M. R. Clausen, J. Hatje, G. Liu, M. Moeller, H. R. Rickens, and B. Schoeneburg, “Managing Alarms and (Log)Messages - the CSS Way”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP017, pp. 125-127.
[n] Y. Yuri and H. Okamoto, “Heating Rate of Highly Space-charge-dominated Ion Beams in a Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC046, pp. 3080-3082.
[n] D. L. Judd, “High-Current Heavy-Ion Linacs as Igniters for Commercial-Scale Inertial Fusion Power Plants”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S2-1, pp. 61-65.
[n] B. M. Campbell, K. C. Dominic Chan, R. C. Gentzlinger, J. P. Kelley, B. Rusnak, and H. Safa, “Engineering Development of Superconducting RF Linac for High-Power Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP14F, pp. 1843-1845.
[n] V. A. Bejsovec, P. B?®m, O. Karban, J. Mares, and Z. Trejbal, “Radial Injection of a Polarised Beam into a Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69G10, pp. XX-XX.
[n] U. Iriso, S. Casalbuoni, G. Rumolo, and F. Zimmermann, “Electron Cloud Simulations for ANKA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP052, pp. 3321-3323.
[n] B. Rusnak, F. L. Krawczyk, and W.-D. M?Âller, “RF Coupler Working Group Report”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THWG3, pp. 744-751.
[n] B. Goddard, M. Gyr, J. Uythoven, R. Veness, and W. Weterings, “LHC Beam Dumping System: Extraction Channel Layout and Acceptance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB009, pp. 1646-1648.
[n] A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_020.
[n] M. R. Clausen et al., “Profibus in Process Controls”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO203, pp. 16-18.
[n] A. Bungau, R. Cywinski, and J. S. Lord, “GEANT4 Simulations of the ISIS Muon Target at Rutherford Appleton Laboratory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP052, pp. 1400-1402.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Kaji, M. Hirose, Y. Iitsuka, and T. Obina, “Archive System of Beam Injection Information at SuperKEKB”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2550-2553.
- W. B. Sampson, K. E. Robins, and M. G. Thomas, “Magnetoresistance Elements for the Measurement and Control of Harmonics in Superconducting Accelerator Magnets”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1157-1160.
- J. Rathlev, M. R. Clausen, J. Hatje, and H. R. Rickens, “A Framework for Authentication and Authorization in Plug-in-Based Control System Software”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP015, pp. 123-124.
- R. K. Bhandari and A. S. Divatia, “Design Aspects of an External Injection System for VEC, Calcutta”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B41, pp. 165-168.
- B. Berkes and D. Brombach, “Magnet System of the SIN Ring Injector Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-13, pp. 191-192.
- A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “Material Studies for the ISIS Muon Target”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA077, pp. 253-255.
- V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1367-1370.
- E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568.
- C. Pagani, E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Design Considerations of a MW-Scale, High-Efficiency, Industrial-Use, Ultraviolet FEL Amplifier”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B12, pp. 773-775.
- E. L. Saldin, V. P. Sarantsev, E. A. Schneidmiller, S. S. Shimanskii, Yu. Ulyanov, and M. V. Yurkov, “On a Possibility to Construct High-Intensity Monochromatic Gamma-Source at HERA and LEP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 834-837.
- M. T. Lynch, D. Keffeler, D. Rees, W. Roybal, and J. Sheikh, “Installation and Test Results of a High-Power, CW Klystrode Amplifier at Los Alamos National Laboratory”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-37, pp. 451-453.
- Z. Zhang, A. Loulergue, F. Marteau, T. Mutin, L. Nadolski, and V. Pinty, “Towards nonlinear modeling of the combined sextupole-corrector magnets at SOLEIL II”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2029, this conference.
- J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
- W.-D. M?Âller, “Input Couplers for Superconducting Cavities - Design and Test”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper SUA03, pp. 20-20.
- J. Sekutowicz, A. Goessel, G. Kreps, and S. Zheng, “Active HOMs Excitation in the First Prototype of Superstructure”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB084, pp. 1392-1394.
- S. S. Gilardoni, S. Aumon, and M. Martini, “Study of Beam Losses at Transition Crossing at the CERN PS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC048, pp. 3086-3088.
- M. J. Tannenbaum, A. K. Ghosh, K. E. Robins, and W. B. Sampson, “Magnetic Properties of the Iron Laminations for CBA Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3472-3475.
- C. M. Celata, A. Faltens, D. L. Judd, L. Smith, and M. G. Tiefenback, “Transverse Combining of Nonrelativistic Beams in a Multiple Beam Induction Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1167-1170.
- A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
- R. Benaroya, T. H. Blewitt, J. M. Brooks, and C. Laverick, “Effect of Fast Neutron Irradiation at Low Temperature on NbZr Coil Performance”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 383-386.
- A. Gilfellon, R. M. Jones, B. Muratori, A. Wheelhouse, and P. Williams, “Beam Dynamics Tracking Simulations for UK XFEL Under the Influence of Long-Range Dipole Wakefields”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2085, this conference.
- S. Kurennoy, J. Jason, and L. Krawczyk, “Development of a Fast Traveling-Wave Beam Chopper for National Spallation Neutron Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P053, pp. 3731-3733.
- M. Modena, A. V. Aloev, E. Solodko, P. A. Thonet, and A. S. Vorozhtsov, “Status of CLIC Magnets Studies and R&D”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1350-1353.
- S. Kato, H. Harada, H. Hotchi, M. Kinsho, and K. Okabe, “Development of the New Measurement Method for the Incoherent Tune Spread and the Tune Shift Caused by the Space Charge Effect”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME020, pp. 512-514.
- J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183.
- V. Zubko et al., “HTS Current Lead Optimization”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE007, pp. 2454-2456.
- S. Russenschuck et al., “Challenges for the Magnet System of LHeC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR075, pp. 1996-1998.
- I. V. Leitao, “Development, Validation and Application of a Novel Method for Estimating the Thermal Conductance of Critical Interfaces in the Jaws of the LHC Collimation System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI060, pp. 3430-3432.
- T. H. Fields and C. Laverick, “Some Supermagnet Design Considerations”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 362-367.
- I. I. Degtyarev et al., “Verification of Modern Evaluated Nuclear Data Libraries on the Basis of Integral Experiments Using the RTS&T Code System”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 401-403.
- D. L. Judd, “General Discussion B”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A13, pp. 57-58.
- A. Beckmann, “Automated Verification Environment for TwinCAT PLC Programs”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC082, pp. 288-291.
- A. A. Pryanichnikov et al., “Numerical Modeling and Development of the Prototype of the Bragg Peak Position Detector Working in Real Time Mode for Hadron Therapy Facilities”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 220-221.
- I. Vasserman, B. Berkes, J. Kvitkovitc, and J. Z. Xu, “Compensation of the Planar Hall Effect Voltage Using a New Two-Sensor Hall Probe Design”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP062, pp. 2404-2406.
- M. R. Clausen et al., “RF Heat Load Compensation for the European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 348-351.
- E. Wang, J. Biswas, and Q. Wu, “Preinjector Design Update for the EIC”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1354, this conference.
- A. Bungau, R. Cywinski, R. J. Barlow, C. Bungau, P. J. C. King, and J. S. Lord, “GEANT4 Modelling of Heat Deposition into the ISIS Muon Target”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP004, pp. 814-816.
- C. Torregrosa et al., “The Hiradmat 27 Experiment: Exploring High-Density Materials Response at Extreme Conditions for Antiproton Production”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3705-3708.
- G. Gurov, “UNK Status and Plans”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG06, pp. 416-419.
- M. R. Clausen, J. Hatje, G. Liu, M. Moeller, H. R. Rickens, and B. Schoeneburg, “Managing Alarms and (Log)Messages - the CSS Way”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP017, pp. 125-127.
- Y. Yuri and H. Okamoto, “Heating Rate of Highly Space-charge-dominated Ion Beams in a Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC046, pp. 3080-3082.
- D. L. Judd, “High-Current Heavy-Ion Linacs as Igniters for Commercial-Scale Inertial Fusion Power Plants”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S2-1, pp. 61-65.
- B. M. Campbell, K. C. Dominic Chan, R. C. Gentzlinger, J. P. Kelley, B. Rusnak, and H. Safa, “Engineering Development of Superconducting RF Linac for High-Power Applications”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP14F, pp. 1843-1845.
- V. A. Bejsovec, P. B?®m, O. Karban, J. Mares, and Z. Trejbal, “Radial Injection of a Polarised Beam into a Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69G10, pp. XX-XX.
- U. Iriso, S. Casalbuoni, G. Rumolo, and F. Zimmermann, “Electron Cloud Simulations for ANKA”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP052, pp. 3321-3323.
- B. Rusnak, F. L. Krawczyk, and W.-D. M?Âller, “RF Coupler Working Group Report”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THWG3, pp. 744-751.
- B. Goddard, M. Gyr, J. Uythoven, R. Veness, and W. Weterings, “LHC Beam Dumping System: Extraction Channel Layout and Acceptance”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB009, pp. 1646-1648.
- A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_020.
- M. R. Clausen et al., “Profibus in Process Controls”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WCO203, pp. 16-18.
- A. Bungau, R. Cywinski, and J. S. Lord, “GEANT4 Simulations of the ISIS Muon Target at Rutherford Appleton Laboratory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP052, pp. 1400-1402.
Back to search