Warning
                The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
                    
    
    Favourites
    
    
    For Word
    
        
                            
[n]	M. Brosi, A. Andersson, J. Breunlin, and F. Cullinan, “Investigation of the microwave instability at MAX IV laboratory in combination with intra-beam scattering”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM099, unpublished. 
                            
[n]	J. Bosser, J. Dieperink, G. Ferioli, J. Mann, and L. Warstki, “Time-Dependent Structure and Spill  Measurements of Proton Beams at the CERN SPS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1905-1908. 
                            
[n]	R. Sah et al., “Beam Pipe HOM Absorber for SRF Cavities”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP096, pp. 1012-1014. 
                            
[n]	A. Kozodaev et al., “Some Ways of Resolve of the ADS Linacs-Drivers Technical  Problems”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21001, pp. XX-XX. 
                            
[n]	W. H?Âfle, P. Baudrenghien, G. Kotzian, and V. Rossi, “Digital Signal Processing for the Multi-bunch LHC Transverse Feedback System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC122, pp. 3269-3271. 
                            
[n]	Y. X. Chen, D. Q. Gao, Y. Z. Huang, R. K. Wang, and H. B. Yan, “A Dipole Power Supply Based on Multi-lever Inverter Technique”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO005, pp. 3343-3345. 
                            
[n]	E. M. Bajon, M. Bannon, G. Danowski, I. Marneris, J. Sandberg, and S. Savatteri, “Booster Main Magnet Power Supply, Present Operation and Potential Future Upgrades”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP191, pp. 1184-1186. 
                            
[n]	R. Bartolome, F. Havart, and T. Riesco, “Diagnostic and Remote Maintenance of Distributed Control Systems Using Freeware Solutions”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP561, pp. XX-XX. 
                            
[n]	A. M. Vetter, C. M. Lyneis, and H. A. Schwettman, “Dependence of Multi-Pass Beam Breakup on Accelerator Parameters”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3757-3760. 
                            
[n]	Y. Shobuda, Y. H. Chin, and K. Takata, “Extension of Napoly Integral for Transverse Wake Potentials to General Axisymmetric Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN046, pp. 3333-3335. 
                            
[n]	Y. M. Pischalnikov et al., “Tests of a Tuner for a 325 MHz SRF Spoke Resonator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP080, pp. 973-975. 
                            
[n]	Y. C. Xu, Y. Z. Chen, K. C. Chu, L. F. Han, Y. B. Leng, and G. B. Zhao, “A New Beam Profile Diagnostic System based on the Industrial Ethernet”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE033, pp. 1044-1046. 
                            
[n]	A. M. J. Paans et al., “The Production and Imaging of 55Co Labelled Bleomycin”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GP-04, pp. 699-701. 
                            
[n]	W. J. M. Weterings et al., “Upgrade of the LHC Beam Dumping Protection Elements”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD081, pp. 556-558. 
                            
[n]	T. Kroyer, P. Borowiec, F. Caspers, Z. Sulek, and L. R. Williams, “Operational Experience with the LHC Waveguide Mode Reflectometer”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS141, pp. 2709-2711. 
                            
[n]	P. Zisopoulos, F. Antoniou, and Y. Papaphilippou, “Parametric Study of the CLIC Damping Rings Delay Ring for Reaching Isochronicity Conditions”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR056, pp. 1948-1950. 
                            
[n]	A. A. Drozdovsky et al., “Investigation of the Formation of a Hollow Beam in the Plasma Lens”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE040, pp. 1062-1064. 
                            
[n]	A. Bartalesi and M. Modena, “3D FEA Computation of the CLIC Machine Detector Interface Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR052, pp. 1936-1938. 
                            
[n]	G. Huang, D. Jia, K. Jin, H. Lin, and Y. Liu, “LLRF System Improvement for HLS Linac Upgrade”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB020, pp. 213-215. 
                            
[n]	V. Rossi, “General Purpose Digital Signal Processing VME-Module for 1-Turn Delay Feedback Systems of the CERN Accelerator Chain”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP076, pp. 2186-2188. 
                            
[n]	S. M. Kocimski et al., “An Electron Accelerator Based System for Assay of Transuranic Waste Barrels”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0036, pp. 427-429. 
                            
[n]	T. Roy, “Advances in SRF Qubit Architectures for Quantum Computing”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper FRIYA01, unpublished. 
                            
[n]	J. W. Glenn et al., “AGS Fast Spin Resonance Jump, Magnets and Power Supplies”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP066, pp. 1699-1701. 
                            
[n]	H. Duarte and F. Cullinan, “Performance of HOM dampers in the 100 MHz RF cavities in the MAX IV 3 GeV ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS064, unpublished. 
                     
     
    
    For LaTeX
        
        
                            Use Complete Form
                    
    
    For BibTeX
        
    References
    
                    - M. Brosi, A. Andersson, J. Breunlin, and F. Cullinan, “Investigation of the microwave instability at MAX IV laboratory in combination with intra-beam scattering”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM099, this conference.
- J. Bosser, J. Dieperink, G. Ferioli, J. Mann, and L. Warstki, “Time-Dependent Structure and Spill  Measurements of Proton Beams at the CERN SPS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1905-1908.
- R. Sah et al., “Beam Pipe HOM Absorber for SRF Cavities”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP096, pp. 1012-1014.
- A. Kozodaev et al., “Some Ways of Resolve of the ADS Linacs-Drivers Technical  Problems”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21001, pp. XX-XX.
- W. H?Âfle, P. Baudrenghien, G. Kotzian, and V. Rossi, “Digital Signal Processing for the Multi-bunch LHC Transverse Feedback System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC122, pp. 3269-3271.
- Y. X. Chen, D. Q. Gao, Y. Z. Huang, R. K. Wang, and H. B. Yan, “A Dipole Power Supply Based on Multi-lever Inverter Technique”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO005, pp. 3343-3345.
- E. M. Bajon, M. Bannon, G. Danowski, I. Marneris, J. Sandberg, and S. Savatteri, “Booster Main Magnet Power Supply, Present Operation and Potential Future Upgrades”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP191, pp. 1184-1186.
- R. Bartolome, F. Havart, and T. Riesco, “Diagnostic and Remote Maintenance of Distributed Control Systems Using Freeware Solutions”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP561, pp. XX-XX.
- A. M. Vetter, C. M. Lyneis, and H. A. Schwettman, “Dependence of Multi-Pass Beam Breakup on Accelerator Parameters”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3757-3760.
- Y. Shobuda, Y. H. Chin, and K. Takata, “Extension of Napoly Integral for Transverse Wake Potentials to General Axisymmetric Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN046, pp. 3333-3335.
- Y. M. Pischalnikov et al., “Tests of a Tuner for a 325 MHz SRF Spoke Resonator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP080, pp. 973-975.
- Y. C. Xu, Y. Z. Chen, K. C. Chu, L. F. Han, Y. B. Leng, and G. B. Zhao, “A New Beam Profile Diagnostic System based on the Industrial Ethernet”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE033, pp. 1044-1046.
- A. M. J. Paans et al., “The Production and Imaging of 55Co Labelled Bleomycin”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GP-04, pp. 699-701.
- W. J. M. Weterings et al., “Upgrade of the LHC Beam Dumping Protection Elements”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD081, pp. 556-558.
- T. Kroyer, P. Borowiec, F. Caspers, Z. Sulek, and L. R. Williams, “Operational Experience with the LHC Waveguide Mode Reflectometer”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS141, pp. 2709-2711.
- P. Zisopoulos, F. Antoniou, and Y. Papaphilippou, “Parametric Study of the CLIC Damping Rings Delay Ring for Reaching Isochronicity Conditions”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR056, pp. 1948-1950.
- A. A. Drozdovsky et al., “Investigation of the Formation of a Hollow Beam in the Plasma Lens”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE040, pp. 1062-1064.
- A. Bartalesi and M. Modena, “3D FEA Computation of the CLIC Machine Detector Interface Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR052, pp. 1936-1938.
- G. Huang, D. Jia, K. Jin, H. Lin, and Y. Liu, “LLRF System Improvement for HLS Linac Upgrade”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB020, pp. 213-215.
- V. Rossi, “General Purpose Digital Signal Processing VME-Module for 1-Turn Delay Feedback Systems of the CERN Accelerator Chain”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP076, pp. 2186-2188.
- S. M. Kocimski et al., “An Electron Accelerator Based System for Assay of Transuranic Waste Barrels”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0036, pp. 427-429.
- T. Roy, “Advances in SRF Qubit Architectures for Quantum Computing”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper FRIYA01, unpublished.
- J. W. Glenn et al., “AGS Fast Spin Resonance Jump, Magnets and Power Supplies”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP066, pp. 1699-1701.
- H. Duarte and F. Cullinan, “Performance of HOM dampers in the 100 MHz RF cavities in the MAX IV 3 GeV ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS064, this conference.
Back to search