Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. P. Xiao, “Design of a Third Harmonic Cavity With Low R/Q for the ESR in BNL EIC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 469. doi:10.18429/JACoW-SRF2021-TUPCAV014
[n] J. Bisognano, J. R. Delayen, and L. Merminga, “Energy Stability in Recirculating, Energy-Recovering Linacs in the Presence of an FEL”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP012G, pp. 1012-1014.
[n] J.-F. Ostiguy and N. Solyak, “Residual Focusing Asymmetry in Superconducting Spoke Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS066, pp. 2652-2654.
[n] A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB06, pp. 822-824.
[n] K. Hirata and E. Keil, “Barycentre Motion of Beams due to Beam-Beam Interaction in Asymmetric Ring Colliders”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1644-1647.
[n] D. J. Nicklaus, “Modernization Plans for Fermilab's Accelerator Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1354. doi:10.18429/JACoW-ICALEPCS2019-WEPHA108
[n] A. S. Romanenko, “Cavity Performance Limitations Understanding via SIMS Studies of Cavity Cutouts”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper TUOFDV06, pp..
[n] K. Hirata, E. Kikutani, M. Sekimoto, and Y. Takaiwa, “Social Aspects of Japanese High Energy Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA057, pp. 205-207.
[n] M. G. Rao, “CEBAF Linac Cryogenic Instrumentation Requirements and a Review of the Available Sensors”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-17, pp. 348-350.
[n] K. Fuchsberger et al., “Determination of the Chromaticity of the TI 8 Transfer Line Based on Kick Response Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP038, pp. 3787-3789.
[n] S. S. Gilardoni and J. Barranco, “Studies of Losses During Continuous Transfer Extraction at the CERN proton Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC047, pp. 3083-3085.
[n] C. Roderick, L. Burdzanowski, and G. Kruk, “The CERN Accelerator Logging Service - 10 Years in Operation: A Look at the Past, Present, and Future”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC028, pp. 612-614.
[n] M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
[n] E. Wooldridge and B. D. Muratori, “Linac Focusing and Beam Break Up for 4GLS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH040, pp. 2871-2873.
[n] B. Goddard et al., “Aperture Measurements of the LHC Injection Regions and Beam Dump Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB068, pp. 1677-1679.
[n] V. A. Papadichev, “Accelerating and Transporting Attosecond and Femtosecond Bunches of Electrons”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP137, pp. 2815-2817.
[n] M. Tobiyama, T. Kasuga, T. Katsura, T. Obina, and T. Takeo, “Measurement of Bunch Time-Structure in KEK PF”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1338-1341.
[n] V. A. Papadichev, “Attosecond and Femtosecond Electron Bunches Obtainable Upon Field Emission in a Combined Quasi-static and Laser Electric Field”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA010, pp. 56-58.
[n] P. Ferguson, L. R. Ives, D. Marsden, M. E. Read, and J. E. Clayton, “PPM Klystrons for Accelerator Systems”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA09, pp. 999-1000.
[n] M. Meddahi et al., “Machine Studies During Beam Commissioning of the SPS-to-LHC Transfer Lines”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP040, pp. 3793-3795.
[n] N. Mounet, E. M?®tral, and G. Rumolo, “Simulation of Multibunch Instabilities with the HEADTAIL Code”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THSDI2, pp. 262-266.
[n] L. Burdzanowski and C. Roderick, “The Renovation of the CERN Controls Configuration Service”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 103-106. doi:10.18429/JACoW-ICALEPCS2015-MOPGF006
[n] P. Ferguson, R. L. Ives, D. Marsden, and M. E. Read, “Development of a 10 kW CW, S-Band, PPM Focused Klystron”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP126, pp. 1068-1069.
[n] S. Aumon et al., “Beam Instabilities Studies at Transition Crossing in the CERN Proton Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP050, pp. 4649-4651.
[n] J. N. Li and A. Mitra, “A 35 MHz Re-Buncher RF Cavity for ISAC at TRIUMF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP18F, pp. 1790-1792.
[n] J. Choi and T. V. Shaftan, “Database Development for NSLS-II Accelerator Data Management”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4137-4139. doi:10.18429/JACoW-IPAC2016-THPOY022
[n] M. L. Neubauer and R. A. Rimmer, “High Power Co-Axial SRF Coupler”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP044, pp. 2095-2097.
For LaTeX
Use Complete Form
For BibTeX
References
- B. P. Xiao, “Design of a Third Harmonic Cavity With Low R/Q for the ESR in BNL EIC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 469.
- J. Bisognano, J. R. Delayen, and L. Merminga, “Energy Stability in Recirculating, Energy-Recovering Linacs in the Presence of an FEL”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP012G, pp. 1012-1014.
- J.-F. Ostiguy and N. Solyak, “Residual Focusing Asymmetry in Superconducting Spoke Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS066, pp. 2652-2654.
- A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB06, pp. 822-824.
- K. Hirata and E. Keil, “Barycentre Motion of Beams due to Beam-Beam Interaction in Asymmetric Ring Colliders”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1644-1647.
- D. J. Nicklaus, “Modernization Plans for Fermilab's Accelerator Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1354.
- A. S. Romanenko, “Cavity Performance Limitations Understanding via SIMS Studies of Cavity Cutouts”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper TUOFDV06, pp..
- K. Hirata, E. Kikutani, M. Sekimoto, and Y. Takaiwa, “Social Aspects of Japanese High Energy Accelerators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA057, pp. 205-207.
- M. G. Rao, “CEBAF Linac Cryogenic Instrumentation Requirements and a Review of the Available Sensors”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-17, pp. 348-350.
- K. Fuchsberger et al., “Determination of the Chromaticity of the TI 8 Transfer Line Based on Kick Response Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP038, pp. 3787-3789.
- S. S. Gilardoni and J. Barranco, “Studies of Losses During Continuous Transfer Extraction at the CERN proton Synchrotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC047, pp. 3083-3085.
- C. Roderick, L. Burdzanowski, and G. Kruk, “The CERN Accelerator Logging Service - 10 Years in Operation: A Look at the Past, Present, and Future”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC028, pp. 612-614.
- M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
- E. Wooldridge and B. D. Muratori, “Linac Focusing and Beam Break Up for 4GLS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH040, pp. 2871-2873.
- B. Goddard et al., “Aperture Measurements of the LHC Injection Regions and Beam Dump Systems”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB068, pp. 1677-1679.
- V. A. Papadichev, “Accelerating and Transporting Attosecond and Femtosecond Bunches of Electrons”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP137, pp. 2815-2817.
- M. Tobiyama, T. Kasuga, T. Katsura, T. Obina, and T. Takeo, “Measurement of Bunch Time-Structure in KEK PF”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1338-1341.
- V. A. Papadichev, “Attosecond and Femtosecond Electron Bunches Obtainable Upon Field Emission in a Combined Quasi-static and Laser Electric Field”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA010, pp. 56-58.
- P. Ferguson, L. R. Ives, D. Marsden, M. E. Read, and J. E. Clayton, “PPM Klystrons for Accelerator Systems”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA09, pp. 999-1000.
- M. Meddahi et al., “Machine Studies During Beam Commissioning of the SPS-to-LHC Transfer Lines”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP040, pp. 3793-3795.
- N. Mounet, E. M?®tral, and G. Rumolo, “Simulation of Multibunch Instabilities with the HEADTAIL Code”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper THSDI2, pp. 262-266.
- L. Burdzanowski and C. Roderick, “The Renovation of the CERN Controls Configuration Service”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 103-106.
- P. Ferguson, R. L. Ives, D. Marsden, and M. E. Read, “Development of a 10 kW CW, S-Band, PPM Focused Klystron”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP126, pp. 1068-1069.
- S. Aumon et al., “Beam Instabilities Studies at Transition Crossing in the CERN Proton Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP050, pp. 4649-4651.
- J. N. Li and A. Mitra, “A 35 MHz Re-Buncher RF Cavity for ISAC at TRIUMF”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP18F, pp. 1790-1792.
- J. Choi and T. V. Shaftan, “Database Development for NSLS-II Accelerator Data Management”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4137-4139.
- M. L. Neubauer and R. A. Rimmer, “High Power Co-Axial SRF Coupler”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP044, pp. 2095-2097.
Back to search