Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Toyoda, K. Hayashi, and M. Katoh, “RF Signal Switching System for Electron Beam Position Monitor Utilizing ARM Microcontroller”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC035, pp. 1160-1163.
[n] J. Eberhardt, F. Caspers, and C. Vollinger, “Preliminary Design of a Perpendicular Biased Ferrite Loaded Accelerating Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3163-3166. doi:10.18429/JACoW-IPAC2015-WEPHA024
[n] S. W. Jang, A. Heo, J. G. Hwang, E.-S. Kim, H.-S. Kim, and H. K. Park, “Test Results on Beam Position Resolution for Low-Q IP-BPM at KEK-ATF2”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC118, pp. 1293-1295.
[n] F. Asvesta et al., “Characterization of transverse profiles along the LHC injector chain at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3490-3493. doi:10.18429/JACoW-IPAC2023-WEPL158
[n] G. Burt et al., “A Transverse Deflecting Cavity for the Measurement of Short Low Energy Bunches at EBTF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC026, pp. 3335-3337.
[n] A. Bubley, V. Reva, and V. Parkhomchuk, “New Generation of the Electron Cooling Systems”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15008, pp. XX-XX.
[n] J. Eberhardt, F. Caspers, and C. Vollinger, “Ferrite Material Characterization in a Static Bias Field for the Design of a Tunable Cavity”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3890-3892. doi:10.18429/JACoW-IPAC2014-THPRI053
[n] F. Jackson et al., “The Status of the ALICE Accelerator R&D Facility at STFC Daresbury Laboratory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUODA03, pp. 934-936.
[n] Y. Zhang, “Experience and Lessons with the SNS Superconducting Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOZMH01, pp. 26-30.
[n] C. Wiesner et al., “Chopping High Intensity Proton Beams Using a Pulsed Wien Filter”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP074, pp. 3907-3909.
[n] K. Fan et al., “Design and Test of Injection Kicker Magnets for the JPARC Main Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP004, pp. 3728-3730.
[n] F. Burkart et al., “Conceptual Design Considerations for the 50 TeV FCC Beam Dump Insertion”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1356-1359. doi:10.18429/JACoW-IPAC2016-TUPMR047
For LaTeX
Use Complete Form
For BibTeX
References
- T. Toyoda, K. Hayashi, and M. Katoh, “RF Signal Switching System for Electron Beam Position Monitor Utilizing ARM Microcontroller”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC035, pp. 1160-1163.
- J. Eberhardt, F. Caspers, and C. Vollinger, “Preliminary Design of a Perpendicular Biased Ferrite Loaded Accelerating Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3163-3166.
- S. W. Jang, A. Heo, J. G. Hwang, E.-S. Kim, H.-S. Kim, and H. K. Park, “Test Results on Beam Position Resolution for Low-Q IP-BPM at KEK-ATF2”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC118, pp. 1293-1295.
- F. Asvesta et al., “Characterization of transverse profiles along the LHC injector chain at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL158, pp. 3490-3493.
- G. Burt et al., “A Transverse Deflecting Cavity for the Measurement of Short Low Energy Bunches at EBTF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC026, pp. 3335-3337.
- A. Bubley, V. Reva, and V. Parkhomchuk, “New Generation of the Electron Cooling Systems”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15008, pp. XX-XX.
- J. Eberhardt, F. Caspers, and C. Vollinger, “Ferrite Material Characterization in a Static Bias Field for the Design of a Tunable Cavity”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3890-3892.
- F. Jackson et al., “The Status of the ALICE Accelerator R&D Facility at STFC Daresbury Laboratory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUODA03, pp. 934-936.
- Y. Zhang, “Experience and Lessons with the SNS Superconducting Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOZMH01, pp. 26-30.
- C. Wiesner et al., “Chopping High Intensity Proton Beams Using a Pulsed Wien Filter”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP074, pp. 3907-3909.
- K. Fan et al., “Design and Test of Injection Kicker Magnets for the JPARC Main Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP004, pp. 3728-3730.
- F. Burkart et al., “Conceptual Design Considerations for the 50 TeV FCC Beam Dump Insertion”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1356-1359.
Back to search