Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Jiao and G. Xu, “Exploring the Ultimate Linear and Nonlinear Performance of the HEPS hybrid 7BA design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2883-2885. doi:10.18429/JACoW-IPAC2016-WEPOW025
[n] J. B. Fitzgerald, B. G. Martlew, P. D. Quinn, and S. L. Smith, “An Analysis of the Operational Performance of the Automatic Global Horizontal Beam Position Control System on the SRS at Daresbury”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE10, pp. 2414-2416.
[n] T. Kamitani et al., “Beam Optics Matching in the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D019, pp. 429-431.
[n] E. G. Auld, S. Oraas, A. J. Otter, G. H. Mackenzie, J. R. Richardson, and J. J. Burgerjon, “Design of the 4000 ton Magnet for the TRIUMF Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A13, pp. XX-XX.
[n] T. Suwada, N. Kamikubota. K.furukawa, and H. Kobayashi, “New Data-Acquisition System of Beam-Position and Wall-Current Monitors for the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D056, pp. 531-533.
[n] S. Hojo, A. Goto, T. Honma, K. Katagiri, and A. Sugiura, “Observation of Longitudinal Space Charge Effects in the Injection Beam Line of NIRS-930 Cyclotron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD028, pp. 427-429.
[n] M. J. Shirakata et al., “Collimator Upgrade Plan of the J-PARC Main Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS035, pp. 3496-3498.
[n] H. Shaker et al., “Design of a Magnetic Bunch Compressor for the THz SASE FEL Proof-of-Principle Experiment at PITZ”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 45-47. doi:10.18429/JACoW-FEL2019-TUP003
[n] P. Bosland et al., “Status of the ESS Elliptical Cryomodules at CEA Saclay”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 945-947. doi:10.18429/JACoW-IPAC2017-MOPVA040
[n] T. Kubo et al., “Multipactor Simulations in 325 MHz Superconducting Spoke Cavity for an Electron Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2892-2894. doi:10.18429/JACoW-IPAC2015-WEPMA053
[n] K. Katagiri et al., “Design of Beam Transport Lines for Radioisotope Production Systems in NIRS Cyclotron Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2162-2164. doi:10.18429/JACoW-IPAC2014-WEPRO088
[n] M. J. Shirakata et al., “Displacement of J-PARC Caused by Megaquake”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS057, pp. 1662-1664.
[n] J. G. Wang, D. Kehne, M. Reiser, D. X. Wang, T. Shea, and E. Boggasch, “Induction Acceleration Module for Maryland Pulse Compression Experiment”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH430, pp. 668-670.
[n] J. D. Sedillo, “Resolver-Based, Closed-Loop Position and Velocity Control for the LANSCE-R Wire Scanner”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM015, pp. 137-140.
[n] K. A. Drees and T. D, “Results from Vernier Scans during the RHIC 2008 PP Run”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP003, pp. 2480-2482.
[n] D. Raparia et al., “End-to-End Simulation for the EBIS Preinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS102, pp. 1874-1876.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Jiao and G. Xu, “Exploring the Ultimate Linear and Nonlinear Performance of the HEPS hybrid 7BA design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2883-2885.
- J. B. Fitzgerald, B. G. Martlew, P. D. Quinn, and S. L. Smith, “An Analysis of the Operational Performance of the Automatic Global Horizontal Beam Position Control System on the SRS at Daresbury”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAE10, pp. 2414-2416.
- T. Kamitani et al., “Beam Optics Matching in the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D019, pp. 429-431.
- E. G. Auld, S. Oraas, A. J. Otter, G. H. Mackenzie, J. R. Richardson, and J. J. Burgerjon, “Design of the 4000 ton Magnet for the TRIUMF Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A13, pp. XX-XX.
- T. Suwada, N. Kamikubota. K.furukawa, and H. Kobayashi, “New Data-Acquisition System of Beam-Position and Wall-Current Monitors for the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D056, pp. 531-533.
- S. Hojo, A. Goto, T. Honma, K. Katagiri, and A. Sugiura, “Observation of Longitudinal Space Charge Effects in the Injection Beam Line of NIRS-930 Cyclotron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD028, pp. 427-429.
- M. J. Shirakata et al., “Collimator Upgrade Plan of the J-PARC Main Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS035, pp. 3496-3498.
- H. Shaker et al., “Design of a Magnetic Bunch Compressor for the THz SASE FEL Proof-of-Principle Experiment at PITZ”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 45-47.
- P. Bosland et al., “Status of the ESS Elliptical Cryomodules at CEA Saclay”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 945-947.
- T. Kubo et al., “Multipactor Simulations in 325 MHz Superconducting Spoke Cavity for an Electron Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2892-2894.
- K. Katagiri et al., “Design of Beam Transport Lines for Radioisotope Production Systems in NIRS Cyclotron Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2162-2164.
- M. J. Shirakata et al., “Displacement of J-PARC Caused by Megaquake”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS057, pp. 1662-1664.
- J. G. Wang, D. Kehne, M. Reiser, D. X. Wang, T. Shea, and E. Boggasch, “Induction Acceleration Module for Maryland Pulse Compression Experiment”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH430, pp. 668-670.
- J. D. Sedillo, “Resolver-Based, Closed-Loop Position and Velocity Control for the LANSCE-R Wire Scanner”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM015, pp. 137-140.
- K. A. Drees and T. D, “Results from Vernier Scans during the RHIC 2008 PP Run”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP003, pp. 2480-2482.
- D. Raparia et al., “End-to-End Simulation for the EBIS Preinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS102, pp. 1874-1876.
Back to search