Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1076-1079.
[n] R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
[n] H. Homeyer et al., “Status of ISL”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper J-4, pp. XX-XX.
[n] K. Bongardt, “Emittance Growth of High Current Beams in Transport Lines”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2560-2563.
[n] F. C. Younger, A. Jackson, P. F. Meads, and L. S. B. Ng, “Electron Storage Ring for X-Ray Lithography”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 440-443.
[n] M. Boyes, “Laser Heater Controls Overview at the Linac Coherent Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP069, pp. XX-XX.
[n] S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Progress in the Beam Preparation for the Multi-turn Extraction at the CERN Proton Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC049, pp. 3089-3091.
[n] S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Experimental Evidence of Beam Trapping with One-third and One-fifth Resonance Crossing”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC050, pp. 3092-3094.
[n] M. Kenda, T. Beltram, T. Juretic, B. Repic, D. Skvarc, and C. Valentincic, “Simplified Instrument/Application Development and System Integration Using Libera Base Software Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN009, pp. 890-893.
[n] P. I. Gladkikh, M. A. Strelkov, and A. Yu. Zelinsky, “DECA - Code for Analysing and Design of Cyclic Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1688-1691.
[n] P. I. Gladkikh, I. M. Karnaukhov, S. G. Kononenko, A. A. Shcherbakov, M. A. Strelkov, and A. Yu. Zelinsky, “PSR-2000. An Injecting System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1463-1466.
[n] T. Y. T. Kuo and J. S. Laughlin, “Initial Experience in Ion Production Using an Ultra-high Power Density Method”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-12, pp. 381-385.
[n] Y. Wang, H. Wiedemann, and F. C. Younger, “Incorporation of a 5 T Superconducting Wiggler in an MLI Synchrotron Light Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2727-2730.
[n] A. Antillon and M. Month, “Theory of Non-Planar Orbits”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2221-2225.
[n] F. Franchi, T. Beier, M. Kirk, M. Moritz, G. Rumolo, and R. Tomas, “A Method to Measure the Skew Quadrupole Strengths in the SIS-18 using Two BPMs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT052, pp. 1957-1959.
[n] A. I. Senchenko, G. A. Fatkin, P. A. Selivanov, and S. S. Serednyakov, “Software and Computational Infrastructure of LIA-20 Control System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 739-741. doi:10.18429/JACoW-RUPAC2016-THPSC088
[n] M. Giovannozzi, F. Franchi, and M. George, “First Results of Space Charge Simulations for the Novel Multi-turn Injection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE081, pp. 4710-4712.
[n] J. Etter, K. Jenkins, and D. Nelson, “Computer Control for the Maryland Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 873-875.
[n] Z. Gelbart, “Parallel Beams Co-Extraction”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-21, pp. XX-XX.
[n] P. Bloemhard and Z. Gelbart, “High Current Beam Profile Monitor (Wire Scanner)”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I5-07, pp. 465-467.
[n] S. S. Serednyakov, “The Software Tools and Capabilities of Diagnostic System for Stability of Magnet Power Supplies at Novosibirsk Free Electron Laser”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO010, pp. 176-178.
[n] S. V. Efimov et al., “The Pulse Stretcher Ring PSR-200. Current Status”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 453-456.
[n] M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
[n] M. Nagaenko and I. Pavletsov, “Simulation of Beam Optics and Beam-Degrader Interaction for COMBAS Fragment-Separator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1394-1397.
[n] R. Tom?ís et al., “First Beta-Beating Measurement in the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP021, pp. 2531-2533.
[n] T. J. Shea, “Commissioning of SNS Beam Instrumentation”, presented at the DIPAC'05, Lyon, France, Jun. 2005, paper ITMM02, unpublished.
[n] F. C. Younger, P. F. Meads, and L. S. B. Ng, “Proton Therapy System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1997-2000.
[n] F. C. Younger and P. F. Meads, “Numerical Design of the Shape of an Azimuthally Symmetric RF Cavity that Resonates at Given Frequencies and Has Zero Response at Other Specified Frequencies”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 558-560.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1076-1079.
- R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
- H. Homeyer et al., “Status of ISL”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper J-4, pp. XX-XX.
- K. Bongardt, “Emittance Growth of High Current Beams in Transport Lines”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2560-2563.
- F. C. Younger, A. Jackson, P. F. Meads, and L. S. B. Ng, “Electron Storage Ring for X-Ray Lithography”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 440-443.
- M. Boyes, “Laser Heater Controls Overview at the Linac Coherent Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP069, pp. XX-XX.
- S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Progress in the Beam Preparation for the Multi-turn Extraction at the CERN Proton Synchrotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC049, pp. 3089-3091.
- S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Experimental Evidence of Beam Trapping with One-third and One-fifth Resonance Crossing”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC050, pp. 3092-3094.
- M. Kenda, T. Beltram, T. Juretic, B. Repic, D. Skvarc, and C. Valentincic, “Simplified Instrument/Application Development and System Integration Using Libera Base Software Framework”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN009, pp. 890-893.
- P. I. Gladkikh, M. A. Strelkov, and A. Yu. Zelinsky, “DECA - Code for Analysing and Design of Cyclic Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1688-1691.
- P. I. Gladkikh, I. M. Karnaukhov, S. G. Kononenko, A. A. Shcherbakov, M. A. Strelkov, and A. Yu. Zelinsky, “PSR-2000. An Injecting System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1463-1466.
- T. Y. T. Kuo and J. S. Laughlin, “Initial Experience in Ion Production Using an Ultra-high Power Density Method”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-12, pp. 381-385.
- Y. Wang, H. Wiedemann, and F. C. Younger, “Incorporation of a 5 T Superconducting Wiggler in an MLI Synchrotron Light Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2727-2730.
- A. Antillon and M. Month, “Theory of Non-Planar Orbits”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2221-2225.
- F. Franchi, T. Beier, M. Kirk, M. Moritz, G. Rumolo, and R. Tomas, “A Method to Measure the Skew Quadrupole Strengths in the SIS-18 using Two BPMs”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT052, pp. 1957-1959.
- A. I. Senchenko, G. A. Fatkin, P. A. Selivanov, and S. S. Serednyakov, “Software and Computational Infrastructure of LIA-20 Control System”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 739-741.
- M. Giovannozzi, F. Franchi, and M. George, “First Results of Space Charge Simulations for the Novel Multi-turn Injection”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE081, pp. 4710-4712.
- J. Etter, K. Jenkins, and D. Nelson, “Computer Control for the Maryland Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 873-875.
- Z. Gelbart, “Parallel Beams Co-Extraction”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-21, pp. XX-XX.
- P. Bloemhard and Z. Gelbart, “High Current Beam Profile Monitor (Wire Scanner)”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I5-07, pp. 465-467.
- S. S. Serednyakov, “The Software Tools and Capabilities of Diagnostic System for Stability of Magnet Power Supplies at Novosibirsk Free Electron Laser”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO010, pp. 176-178.
- S. V. Efimov et al., “The Pulse Stretcher Ring PSR-200. Current Status”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 453-456.
- M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
- M. Nagaenko and I. Pavletsov, “Simulation of Beam Optics and Beam-Degrader Interaction for COMBAS Fragment-Separator”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1394-1397.
- R. Tom?ís et al., “First Beta-Beating Measurement in the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP021, pp. 2531-2533.
- T. J. Shea, “Commissioning of SNS Beam Instrumentation”, presented at the 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITMM02, unpublished.
- F. C. Younger, P. F. Meads, and L. S. B. Ng, “Proton Therapy System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1997-2000.
- F. C. Younger and P. F. Meads, “Numerical Design of the Shape of an Azimuthally Symmetric RF Cavity that Resonates at Given Frequencies and Has Zero Response at Other Specified Frequencies”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 558-560.
Back to search