Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Bongers et al., “The REX-ISOLDE Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01A, pp. 728-730.
[n] F. Falkenstern, J. Kuszynski, and G. Rehm, “Booster Fillpattern Monitor”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 473-475. doi:10.18429/JACoW-IBIC2022-WEP31
[n] G. Rehm, “Review of BPM Drift Effects and Compensation Schemes”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper MO3I1, unpublished.
[n] Y. C. Chen et al., “Optimization and Upgrade of Slow Extraction Control System for HIRFL CSR Main Ring”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1663-1665. doi:10.18429/JACoW-ICALEPCS2017-THPHA122
[n] J. H. Li, Z. Li, and S. Zheng, “The Simulation of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 93-96. doi:10.18429/JACoW-ICAP2015-WEP14
[n] J. Gronberg, A. Abbott, C. G. Brown, J. A. Clarke, J. B. Javedani, and W. T. Piggott, “Design of a Pulsed Flux Concentrator for the ILC Positron Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC037, pp. 4137-4139.
[n] T. Powers, N. C. Brock, and T. D. Ganey, “In Situ Plasma Processing of Superconducting Cavities at Jefferson Lab”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 485. doi:10.18429/JACoW-SRF2021-TUPTEV004
[n] A. F. D. Morgan, M. G. Abbott, and G. Rehm, “First Use of Current and Charge Measurement Systems in the Commissioning of Diamond”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH045, pp. 1106-1108.
[n] W. S. Graves, S. K. Feng, P. S. Pearson, and J. D. Smith, “Innovative Aspects of the SDL Control System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P036, pp. 2437-2439.
[n] M. G. Abbott, G. Rehm, and I. Uzun, “The Diamond Light Source Control System Interface to the Libera Beam Position Monitors”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP011, pp. 694-696.
[n] S. Khan et al., “Results from the Optical Replica Experiments at FLASH”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THBAU04, pp. 497-500.
[n] G. Rehm and M. G. Abbott, “Performance of Global Diagnostics Systems during the Commissioning of Diamond”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH046, pp. 1109-1111.
[n] L. Serafini and C. Pagani, “Analytical Scaling Laws and Main Guide-Lines for the Design of RF Gun Cavities”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-67, pp. 799-801.
[n] M. J. Furseman, C. P. Bailey, S. Gayadeen, G. Rehm, and W. A. H. Rogers, “Correction of 10 Hz Orbit Distortion From Diamond's I10 Fast Switching Chicane”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 682-685. doi:10.18429/JACoW-ICALEPCS2017-TUPHA118
[n] G. Rehm and M. G. Abbott, “Performance Verification of the Diamond EBPM Electronics”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM028, pp. XX-XX.
[n] J. Gao, “An S-Band Superconducting Linear Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP084G, pp. 498-500.
[n] Y. Funakoshi et al., “Recent Progress of KEKB”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP043, pp. 2588-2590.
[n] Z. C. Liu, J. Gao, S. Jin, Y. Wang, and H. J. Zheng, “High HOM Damping Structure Study for CEPC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2183-2185. doi:10.18429/JACoW-IPAC2016-WEPMB028
For LaTeX
Use Complete Form
For BibTeX
References
- H. Bongers et al., “The REX-ISOLDE Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP01A, pp. 728-730.
- F. Falkenstern, J. Kuszynski, and G. Rehm, “Booster Fillpattern Monitor”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 473-475.
- G. Rehm, “Review of BPM Drift Effects and Compensation Schemes”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper MO3I1, unpublished.
- Y. C. Chen et al., “Optimization and Upgrade of Slow Extraction Control System for HIRFL CSR Main Ring”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1663-1665.
- J. H. Li, Z. Li, and S. Zheng, “The Simulation of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 93-96.
- J. Gronberg, A. Abbott, C. G. Brown, J. A. Clarke, J. B. Javedani, and W. T. Piggott, “Design of a Pulsed Flux Concentrator for the ILC Positron Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC037, pp. 4137-4139.
- T. Powers, N. C. Brock, and T. D. Ganey, “In Situ Plasma Processing of Superconducting Cavities at Jefferson Lab”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 485.
- A. F. D. Morgan, M. G. Abbott, and G. Rehm, “First Use of Current and Charge Measurement Systems in the Commissioning of Diamond”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH045, pp. 1106-1108.
- W. S. Graves, S. K. Feng, P. S. Pearson, and J. D. Smith, “Innovative Aspects of the SDL Control System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P036, pp. 2437-2439.
- M. G. Abbott, G. Rehm, and I. Uzun, “The Diamond Light Source Control System Interface to the Libera Beam Position Monitors”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP011, pp. 694-696.
- S. Khan et al., “Results from the Optical Replica Experiments at FLASH”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THBAU04, pp. 497-500.
- G. Rehm and M. G. Abbott, “Performance of Global Diagnostics Systems during the Commissioning of Diamond”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH046, pp. 1109-1111.
- L. Serafini and C. Pagani, “Analytical Scaling Laws and Main Guide-Lines for the Design of RF Gun Cavities”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-67, pp. 799-801.
- M. J. Furseman, C. P. Bailey, S. Gayadeen, G. Rehm, and W. A. H. Rogers, “Correction of 10 Hz Orbit Distortion From Diamond's I10 Fast Switching Chicane”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 682-685.
- G. Rehm and M. G. Abbott, “Performance Verification of the Diamond EBPM Electronics”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM028, pp. XX-XX.
- J. Gao, “An S-Band Superconducting Linear Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP084G, pp. 498-500.
- Y. Funakoshi et al., “Recent Progress of KEKB”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP043, pp. 2588-2590.
- Z. C. Liu, J. Gao, S. Jin, Y. Wang, and H. J. Zheng, “High HOM Damping Structure Study for CEPC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2183-2185.
Back to search