JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	F. Falkenstern, J. Kuszynski, and G. Rehm, “Booster Fillpattern Monitor”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 473-475. doi:10.18429/JACoW-IBIC2022-WEP31
[n]	W. Fang et al., “R&D of X-band Accelerating Structure for Compact XFEL at SINAP”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP127, pp. 715-718. 
[n]	G. Rees, “Calculated Bem-Loading Effects in the nAL Main-Ring RF System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 519-526. 
[n]	P. Kuske et al., “Experience with the Beam Position Monitor System of the BESSY II Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA84, pp. 2078-2080. 
[n]	Z. Liu, H. Deng, Z. Jiang, X. Li, H. Qian, and G. Shu, “The correction of beam trajectory for low energy injector”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS026, unpublished. 
[n]	S. R. Mane, “Space-Charge Effets in the Fermilab Main Ring at 8 GeV”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1804-1806. 
[n]	S. Di Mitri et al., “Optimization and Modeling of the Accelerator for the FERMI @ Elettra FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP040, pp. XX-XX. 
[n]	S. Buhler et al., “Status Report of the TTF Capture Cavity Cryostat”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F28, pp. 689-693. 
[n]	M. I. Ayzatsky, “Operating Performances and Current Status of the Laser Injector Complex Facility (LIC)”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP27, pp. 116-118. 
[n]	W. Bartmann et al., “Feasibility of 2 GeV Injection into the CERN PS”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO2B05, pp. 343-347. 
[n]	M. Ge et al., “Frequency Tuner Development and Testing at Cornell for the RAON Half-wave-resonator”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 266-268. doi:10.18429/JACoW-SRF2017-MOPB087
[n]	J. Pozimski, “Investigation of Space Charge Compensated Transport by Use of a Gabor Plasma Lens”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP14, pp. 80-82. 
[n]	C. Lechner et al., “First Direct Seeding at 38nm”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUOAI01, pp. 197-199. 
[n]	C. Pagani, “A High Current Proton Linac with 352 MHz SC Cavities”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP23, pp. 107-109. 
[n]	Y. Luo, M. Bai, W. Fischer, C. Montag, and S. M. White, “Beam-beam Effects in RHIC”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1A01, pp. 479-483. 
[n]	N. Blaskovic Kraljevic et al., “Development of a Low-latency, High-precision, Intra-train Beam Feedback System Based on Cavity Beam Position Monitors”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2783-2785. doi:10.18429/JACoW-IPAC2014-THOAA02
[n]	C. Hovater, “The CEBAF RF Separator System”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP12, pp. 77-79. 
[n]	F. Curbis et al., “Characterization of Seeded FEL Pulses at FLASH: Status, Challenges and Opportunities”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPB21, pp. 298-301. 
[n]	W. Barry, P. Kloeppel, and R. Rossmanith, “Technique of Measuring Bunch Length by Phasing an RF Cavity”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH447, pp. 719-720. 
[n]	Y. Baconnier et al., “The CERN PS as e/e- Accelerator in the LEP Injector Chain:  First Results,”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 857-860. 
[n]	J. Szumega, B. Gkotse, P. Jouvelot, F. Ravotti, and L. bougueroua, “Machine learning for the anomaly detection and characterization of the 24 GeV/c proton beam at CERN IRRAD Facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM110, unpublished. 
[n]	K. W. Zieher, G. Hochschild, A. Hornung, J. P. Fouan, J. Gastebois, and P. Joly, “Operation of the Karlsruhe Superconducting Post Accelerator Test Section in the Saclay Tandem Heavy Ion Beam”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S2-10, pp. 114-117. 
[n]	T. Lefevre et al., “Instrumentation for Longitudinal Beam Gymnastics in FEL's and in the CLIC test facility 3”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEO1A03, pp. 215-217. 
[n]	K. Kauchha, P. Pradhan, P. Liu, and Y. Shvyd'ko, “Single-shot meV-resolution hard X-ray spectrograph for CBXFEL diagnostics”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG04, unpublished. 
[n]	M. I. Bryzgunov et al., “Electron Collector for 2 MeV Electron Cooler for COSY”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS07, pp. 103-106. 
[n]	G. Rees, “Important Design Issues of High Output Current Proton Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 241-246. 
[n]	S. Di Mitri and L. Tosi, “Nonlinear Evolution of the Beam in Phase Space at Elettra”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT090, pp. 2059-2061. 
[n]	I. Podadera et al., “Status of the Beam Position Monitors for LIPAc”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC19, pp. 93-96. 
[n]	J. M. Maus, R. A. Jameson, and A. Schempp, “PteqHI Development and Code Comparing”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC031, pp. 322-325. 
[n]	A. Y. Molodozhentsev, L. Pribyl, and K. O. Kruchinin, “Degradation of Electron Beam Quality for a Compact Laser-Based FEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3029-3031. doi:10.18429/JACoW-IPAC2018-THPAF033
[n]	M. Cavenago, “Optimization of Ion Source Extraction and Transport with Symbolic Manipulation Programs: Electrostatic Lenses Formulas”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP29, pp. 122-124. 
[n]	R. Kazimi, F. R. Huson, W. W. MacKay, and C. R. Meitzler, “Operation of a 473 MHz Four-Rod Cavity RFQ”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-09, pp. 317-319. 
[n]	Y. Luo and W. Fischer, “Computational Challenges for Beam-Beam Simulations for RHIC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2C02, pp. 521-523. 
[n]	R. A. Belshe, V. P. Elischer, and V. Jacobson, “The Feasibility and Advantages of Commercial Process I/O Systems for Accelerator Control”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1036-1042. 
[n]	G. B. Christian et al., “A Sub-micron Resolution, Wide-band, Stripline BPM System for Driving Bunch-by-bunch Feed-back and Feed-forward Systems at ATF”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1358-1360. doi:10.18429/JACoW-IPAC2014-TUPME009
[n]	F. Grespan, M. Comunian, A. Pisent, M. Poggi, C. R. Roncolato, and P. Mereu, “ESS DTL Design and Drift Tube Prototypes”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP087, pp. 1050-1052. 
[n]	E. Huttel, I. Birkel, A.-S. M??ller, N. J. Smale, K. G. Sonnad, and P. Wesolowski, “A Full-Energy-Injector for the ANKA Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP025, pp. 1147-1149. 
[n]	S. Biri et al., “Multi-Diagnostic Setup to Investigate the Two-Close-Frequency Phenomena”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 115-119. doi:10.18429/JACoW-ECRIS2018-TUP14
[n]	M. Debongnie et al., “Modelization of an Injector With Machine Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3096-3099. doi:10.18429/JACoW-IPAC2019-WEPTS006
[n]	H. Loos et al., “Commissioning of the LCLS Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper FR102, pp. 1095-1099. 
[n]	D. P. May, D. R. Haenni, R. C. Rogers, P. Smelser, and D. H. Youngblood, “Status of the Texas AM K500 Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper F-03, pp. 195-198. 
[n]	F.-J. Boergermann, Co. KG, J. Bahrdt, R. Blank, J. Pflueger, and G. W. Reppel, “Improved Homogeneity of Permanent Magnets for Undulators and Wigglers”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC101, pp. 2234-2236. 
[n]	R. L. Geng, J. Kirchgessner, H. Padamsee, J. Sears, and V. Shemelin, “An Optimized Shape Cavity for TESLA: Concept and Fabrication”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB051, pp. 1314-1316. 
[n]	A. D. Palczewski, G. Ciovati, R. L. Geng, and Y. M. Li, “Exploration of Material Removal Rate of SRF Elliptical Cavities as a Function of Media Type and Cavity Shape on Niobium and Copper Using Centrifugal Barrel Polishing (CBP)”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP064, pp. 579-582. 
[n]	E. Pozdeyev, “Ion Trapping and Cathode Bombardment by Trapped Ions in DC Photoguns”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS079, pp. 1356-1358. 
[n]	A. V. Fedotov et al., “Electron Cooling in the Presence of Undulator Fields”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS092, pp. 3696-3698. 
[n]	W. H. C. Theuws, “The 75 MeV Racetrack Microtron Eindhoven”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP18, pp. 92-94. 
[n]	J. Fusellier and J. M. Joly, “Beam Intensity Monitoring and Machine Protection by Toroidal Transformers on the TESLA Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP012L, pp. 1591-1593. 
[n]	G. Penco, S. M. Lidia, and M. Trovo, “The RF Injector for the FERMI @ Elettra Seeded X-Ray FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP060, pp. XX-XX. 
[n]	C. K. Allen et al., “A Novel Online Simulator for Applications Requiring a Model Reference”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE116, pp. XX-XX. 
[n]	G. Mouchaty, D. P. May, R. C. Rogers, and P. Smelser, “Performance of the Texas AM ECRIS”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-17, pp. 369-371. 
[n]	B. Feinberg and I. G. Brown, “The SuperHILAC Upgrade Project”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-9, pp. 263-265. 
[n]	R. L. Geng et al., “Development of Ultra High Gradient and High Q0 Superconducting Radio Frequency Cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO076, pp. 2474-2476. 
[n]	P. Wesolowski, I. Birkel, E. Huttel, A.-S. M??ller, M. Pont, and F. P?®rez, “A Vertical Multi-Bunch Feedback System for ANKA”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP001, pp. 761-763. 
[n]	C. Montag, M. Blaskiewicz, W. Fischer, W. W. MacKay, and E. Pozdeyev, “eRHIC Ring-Ring Design with Head-on Beam-Beam Compensation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP060, pp. 2637-2639. 
[n]	L. Schaper, K. Honkavaara, and M. Vogt, “Operation of FLASH above 1.3 GeV and below 4 nm”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOYA003, unpublished. 
[n]	F. Stulle, A. Ferrari, A. Latina, L. Rinolfi, and D. Schulte, “CLIC Main Beam Dynamics in the Ring to Main Linac Transport”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP047, pp. 3814-3816. 
[n]	M. Castellano, “Conclusions from the LISA Superconducting Linac Experience”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP22, pp. 104-106. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search