Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Ferreira, S. Blanchard, P. Gomes, G. Pigny, and T. R. Fernandes, “LTE/3G Based Wireless Communications for Remote Control and Monitoring of PLC-Controlled Vacuum Mobile Devices”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 64-70. doi:10.18429/JACoW-ICALEPCS2017-MOCPL04
[n] W. Guo, S. L. Kramer, F. J. Willeke, X. Yang, and L. Yu, “A Lattice Correction Approach through Betatron Phase Advance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 62-64. doi:10.18429/JACoW-IPAC2016-MOOCB02
[n] S. Hahn, “Recent progress in high temperature superconductor magnet technology”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEZD1, unpublished.
[n] B. Bing, T. M. Huang, Q. Ma, F. Meng, W. M. Pan, and K. X. Gu, “Design of Fundamental Power Coupler for High Intensity Heavy-ion Accelerator”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 183-185. doi:10.18429/JACoW-SRF2017-MOPB054
[n] J. V. Conway, Y. Li, and M. A. Palmer, “The Conceptual Design of a Vacuum System for the ILC Damping Rings Incorporating Electron Cloud Mitigation Techniques”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR062, pp. 1960-1962.
[n] T. Linnecar and W. Scandale, “Continuous Tune Measurements Using the Schottky Detector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2185-2188.
[n] R. Maier, S. Martin, D. Prasuhn, O. W. B. Schult, and I. Zychor, “Beam Parameters at the Internal Target Positions for Experiments in COSY-Juelich”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP104G, pp. 1429-1431.
[n] T. A. Miller, S. Bellavia, I. Ben-Zvi, J. M. Fite, and D. M. Gassner, “Instrumentation Designs for Beam Distribution Measurements in the ERL Beam Dump at BNL”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS14, pp. 108-111.
[n] S. Blanchard et al., “Vacuum Pumping Group Controls Based on PLC”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO030, pp. 105-107.
[n] A. K. Mitra and P. J. Tallerico, “Spark-Gap Crowbar for High-Voltage Power Supply”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2862-2865.
[n] E. Carrone, A. Tsirou, and P. G. Verdini, “A Discrete Event System the CMS Tracker Interlocks”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O4_012.
[n] T. Schultheiss, J. Rathke, V. Ravindranath, J. Rose, and S. K. Sharma, “CESR-type SRF Cavity - Meeting the ASME Pressure Vessel Criteria by Analysis”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP271, pp. 1328-1330.
[n] B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868.
[n] D. M. Gassner, C. Liu, R. J. Michnoff, T. A. Miller, M. G. Minty, and M. Wilinski, “Status of the BNL ERL Instrumentation”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS11, pp. 100-105.
[n] M. T. Heron, K. A. R. Baker, S. Lay, and P. D. Woods, “Use of Industrial Control Solutions in the Diamond Project”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP548, pp. XX-XX.
[n] Y. Yonemura et al., “Status of Center for Accelerator and Beam Applied Science of Kyushu University”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP070, pp. 3521-3523.
[n] K. Nakamura et al., “Experimental Study of Self-Trapping in Capillary Discharge Guided Laser Wakefield Acceleration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP076, pp. 2973-2975.
[n] K. Aulenbacher, J. Diefenbach, R. G. Heine, and F. Schlander, “Status of the MESA Accelerator”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PLT01, pp. 1-5.
[n] Y. Takashima et al., “Present Status of Accelerators in Aichi Synchrotron Radiation Center”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2877-2879. doi:10.18429/JACoW-IPAC2016-WEPOW023
[n] K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345.
[n] T. Bahlo, M. Arnold, J. Pforr, N. Pietralla, and F. Schlie?ƒmann, “Time-of-Flight Measurements and Analysis of the Longitudinal Dispersion at the S-DALINAC”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 57-60. doi:10.18429/JACoW-IBIC2017-MOPCC08
For LaTeX
Use Complete Form
For BibTeX
References
- R. Ferreira, S. Blanchard, P. Gomes, G. Pigny, and T. R. Fernandes, “LTE/3G Based Wireless Communications for Remote Control and Monitoring of PLC-Controlled Vacuum Mobile Devices”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 64-70.
- W. Guo, S. L. Kramer, F. J. Willeke, X. Yang, and L. Yu, “A Lattice Correction Approach through Betatron Phase Advance”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 62-64.
- S. Hahn, “Recent progress in high temperature superconductor magnet technology”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEZD1, unpublished.
- B. Bing, T. M. Huang, Q. Ma, F. Meng, W. M. Pan, and K. X. Gu, “Design of Fundamental Power Coupler for High Intensity Heavy-ion Accelerator”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 183-185.
- J. V. Conway, Y. Li, and M. A. Palmer, “The Conceptual Design of a Vacuum System for the ILC Damping Rings Incorporating Electron Cloud Mitigation Techniques”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR062, pp. 1960-1962.
- T. Linnecar and W. Scandale, “Continuous Tune Measurements Using the Schottky Detector”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2185-2188.
- R. Maier, S. Martin, D. Prasuhn, O. W. B. Schult, and I. Zychor, “Beam Parameters at the Internal Target Positions for Experiments in COSY-Juelich”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP104G, pp. 1429-1431.
- T. A. Miller, S. Bellavia, I. Ben-Zvi, J. M. Fite, and D. M. Gassner, “Instrumentation Designs for Beam Distribution Measurements in the ERL Beam Dump at BNL”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper PS14, pp. 108-111.
- S. Blanchard et al., “Vacuum Pumping Group Controls Based on PLC”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO030, pp. 105-107.
- A. K. Mitra and P. J. Tallerico, “Spark-Gap Crowbar for High-Voltage Power Supply”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2862-2865.
- E. Carrone, A. Tsirou, and P. G. Verdini, “A Discrete Event System the CMS Tracker Interlocks”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O4_012.
- T. Schultheiss, J. Rathke, V. Ravindranath, J. Rose, and S. K. Sharma, “CESR-type SRF Cavity - Meeting the ASME Pressure Vessel Criteria by Analysis”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP271, pp. 1328-1330.
- B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868.
- D. M. Gassner, C. Liu, R. J. Michnoff, T. A. Miller, M. G. Minty, and M. Wilinski, “Status of the BNL ERL Instrumentation”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper PS11, pp. 100-105.
- M. T. Heron, K. A. R. Baker, S. Lay, and P. D. Woods, “Use of Industrial Control Solutions in the Diamond Project”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP548, pp. XX-XX.
- Y. Yonemura et al., “Status of Center for Accelerator and Beam Applied Science of Kyushu University”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP070, pp. 3521-3523.
- K. Nakamura et al., “Experimental Study of Self-Trapping in Capillary Discharge Guided Laser Wakefield Acceleration”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP076, pp. 2973-2975.
- K. Aulenbacher, J. Diefenbach, R. G. Heine, and F. Schlander, “Status of the MESA Accelerator”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper PLT01, pp. 1-5.
- Y. Takashima et al., “Present Status of Accelerators in Aichi Synchrotron Radiation Center”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2877-2879.
- K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345.
- T. Bahlo, M. Arnold, J. Pforr, N. Pietralla, and F. Schlie?ƒmann, “Time-of-Flight Measurements and Analysis of the Longitudinal Dispersion at the S-DALINAC”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 57-60.
Back to search