JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. Saban, “Integrating Industrial and Accelerator Control Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE01, pp. 2147-2151. 
[n]	H. Delsim-Hashemi et al., “Single-Shot Longitudinal Diagnostics with THz Radiation at the Free-Electron Laser FLASH”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH018, pp. 594-596. 
[n]	S. Seletskiy, M. Blaskiewicz, A. V. Fedotov, D. Kayran, and J. Kewisch, “Effect of Beam-Beam Kick on Electron Beam Quality in First Bunched Electron Cooler”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3297-3300. doi:10.18429/JACoW-IPAC2019-WEPTS075
[n]	M. McGee and Y. M. Pischalnikov, “Mechanical Stability Study of Capture Cavity II at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN103, pp. 2274-2276. 
[n]	L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-MEDSI2016-MOPE43
[n]	D. B. Hopkins et al., “Design and Fabrication of 33 GHz High-Gradient Accelerator Sections”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1157-1160. 
[n]	J. Z. Xu et al., “Linac Coherent Light Source (LCLS) Undulator Line Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP091, pp. 290-292. 
[n]	T. Gromme et al., “Slow Feedback Systems for PEP-II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A15, pp. 1897-1899. 
[n]	D. Liska, J. Billen, L. Dauelsberg, H. Mignardot, and G. Zimmerman, “A High-Intensity Drift-Tube Linac with Ramped Accelerating Gradient”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-52, pp. 652-655. 
[n]	S. Allison, P. Corredoura, W. Ross, R. Sass, and R. Tighe, “Experience with the PEP-II RF System at High Beam Currents”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A13, pp. 1891-1893. 
[n]	A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1007-1011. doi:10.18429/JACoW-ICALEPCS2017-TUSH303
[n]	J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251. 
[n]	R. B. Agustsson et al., “An Overview of Normal Conducting Radio Frequency Projects and Manufacturing Capabilities at Radiabeam Technologies, LLC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP051, pp. 2214-2216. 
[n]	S. Henderson et al., “The Commissioning Plan for the Spallation Neutron Source Ring and Transport Lines”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE011, pp. 1569-1571. 
[n]	J. Santander-Vela, L. Pivetta, and N. P. Rees, “Status of the Square Kilometre Array”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1982-1988. doi:10.18429/JACoW-ICALEPCS2017-FRAPL01
[n]	R. S. Livingston, “Session IV Summary”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D01, pp. 181-181. 
[n]	C. David, J. Jacob, A. Panzarella, J.-P. Perrine, and J.-L. Revol, “Commissioning of the Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02C, pp. 1755-1757. 
[n]	T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1073-1078. doi:10.18429/JACoW-ICALEPCS2015-THHA2I01
[n]	R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484. 
[n]	A. Luedeke, “Cognitive Ergonomics of Operational Tools”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHAUIO06, pp. 1196-1200. 
[n]	B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1350-1353. doi:10.18429/JACoW-IPAC2023-TUPA001
[n]	A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_020. 
[n]	I. Rutkowski, L. Butkowski, M. Hoffmann, H. Schlarb, and Ch. Schmidt, “REGAE LLRF Control System Overview”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA031, pp. 3210-3212. 
[n]	X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 165-168. doi:10.18429/JACoW-MEDSI2016-TUPE06
[n]	M. Kreider, W. W. Terpstra, J. H. Lewis, J. Serrano, and T. Wlostowski, “EtherBone - A Network Layer for the Wishbone SoC Bus”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEBHMULT03, pp. 642-645. 
[n]	P. Golonka, M. Gonzalez-Berges, J. Guzik, and R. Kulaga, “Future Archiver for CERN SCADA Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1442-1445. doi:10.18429/JACoW-ICALEPCS2017-THPHA037
[n]	F. Toral et al., “Design, Manufacturing and Tests of a Micrometer Precision Mover for CTF3 Quadrupoles”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD040, pp. 1517-1519. 
[n]	G. Swain, M. Burns, and P. Busch, “Generating Catalogs of Transverse Matching Solutions”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 598-601. 
[n]	V. Alferov et al., “LabView Control System of the Cryogenic Complex for the Kaon RF-Separator at IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB038, pp. 257-259. 
[n]	A. Luedeke, “The Operation Event Logging System of the SLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC142, pp. 3318-3320. 
[n]	X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 162-164. doi:10.18429/JACoW-MEDSI2016-TUPE05
[n]	G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1353-1356. 
[n]	J. B?ñhr et al., “Measurement of the longitudinal phase space at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT22, pp. XX-XX. 
[n]	U. Mavric et al., “Commissioning of the Low-Noise MTCA.4-based Local Oscillator and Clock Generation Module”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 847-849. doi:10.18429/JACoW-IPAC2015-MOPHA030
[n]	M. M. Lipinski, J. Serrano, T. Wlostowski, and C. Prados, “Reliability in a White Rabbit Network”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU007, pp. 698-701. 
[n]	A. P. Zhukov and I. Nesterenko, “Measurement and Detailed Simulation of Beam Losses Caused by Thin Interception Devices (Wire Scanners, Scrapers) at SNS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP013, pp. 3977-3978. 
[n]	K. W. Shepard, “A Low-Frequency RFQ for a Low-Charge-State Injector for ATLAS”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP09, pp. 68-70. 
[n]	L. Perrot, M. Kemel, and S. Rousselot, “Benchmark Analyses of Electrostatic Devices for SPIRAL2-DESIR Beam Lines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3225-3227. doi:10.18429/JACoW-IPAC2018-THPAK009
[n]	N. Guillotin et al., “Operation of SOLEIL with the Two 352 MHz Cryomodules in the Storage Ring”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO030, pp. 268-268. 
[n]	A. I. Wawrzyniak et al., “Performance of SOLARIS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2490-2494. doi:10.18429/JACoW-IPAC2017-WEOCA1
[n]	P. Ch. Chochula, A. Augustinus, A. N. Kurepin, M. Lechman, O. Pinazza, and P. Rosinsky, “Operational Experience with the ALICE Detector Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB07, pp. 1485-1488. 
[n]	B. M. Campbell, K. C. Dominic Chan, R. C. Gentzlinger, J. P. Kelley, B. Rusnak, and H. Safa, “Engineering Development of Superconducting RF Linac for High-Power Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP14F, pp. 1843-1845. 
[n]	Y. Goren and D. U. L. Yu, “Computer-Aided Design of Three-Dimensional Waveguide Loaded Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 189-193. 
[n]	G. Vecchio et al., “Management Software and Data Exchange Protocol for the INFN-LNS Accelerators Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 846-848. doi:10.18429/JACoW-ICALEPCS2017-TUPHA179
[n]	H. Higaki et al., “A Tank Circuit Monitoring a Large Number of Antiprotons in MUSASHI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE001, pp. 948-950. 
[n]	J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369. 
[n]	M. T. Lynch et al., “Linac Design Study for an Intense Neutron-Source Driver”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1683-1686. 
[n]	A. Kisiel et al., “BPM Based Optics Correction of the Solaris 1.5 GeV Storage Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 836-839. doi:10.18429/JACoW-IBIC2016-WEPG78
[n]	L. Masetti et al., “A Scalable and Homogeneous Web-Based Solution for Presenting CMS Control System Data”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB01, pp. 1040-1043. 
[n]	G. Iadarola, B. Bradu, P. Dijkstal, L. Mether, and G. Rumolo, “Impact and Mitigation of Electron Cloud Effects in the Operation of the Large Hadron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2085-2088. doi:10.18429/JACoW-IPAC2017-TUPVA019
[n]	D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399. 
[n]	W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1887-1890. 
[n]	Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I3_002. 
[n]	C. Yao, N. P. Di Monte, and W. E. Norum, “An FPGA-Based Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN116, pp. 440-442. 
[n]	M. Ritzert, “A Database to Store EPICS Configuration Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 745-747. doi:10.18429/JACoW-ICALEPCS2017-TUPHA143
[n]	D. La Civita, R. Bracco, B. Diviacco, G. Tomasin, and D. Zangrando, “FERMI@Elettra Undulator Frame Study”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC116, pp. 2276-2278. 
[n]	C. O. Domínguez and F. Zimmermann, “Luminosity Optimization for a Higher-Energy LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ014, pp. 1831-1833. 
[n]	K. W. Shepard, “A Superconducting Heavy Ion Injector Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3574-3578. 
[n]	P. M. Strubin and N. N. Trofimov, “First Experience with Control and Operational Models for Vacuum Equipment in the AD Decelerator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL4, pp. 346-348. 
[n]	A. M. Marendziak et al., “Performance of the Vacuum System for the Solaris 1.5 GeV Electron Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2898-2901. doi:10.18429/JACoW-IPAC2016-WEPOW031
[n]	D. B. Shwartz et al., “Present Status of VEPP-2000”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHX02, pp. XX-XX. 
[n]	J. J. Wiechecki et al., “Impact of the DBA Blocks Alignment on the Beam Dynamics of the Storage Ring in Solaris”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2902-2904. doi:10.18429/JACoW-IPAC2016-WEPOW032
[n]	J. Holmes, S. Cousineau, V. Danilov, A. Fedotov, S. Henderson, and A. Shishlo, “Computational Studies of Collective Beam Dynamics in High Intensity Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA005, pp. 117-119. 
[n]	M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n]	K. R. Kim et al., “Utilization of Cr2O3 Passivation Process on Stainless-Steel Chamber for XHV Environment”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99910, pp. XX-XX. 
[n]	R. B. Agustsson et al., “Normal Conducting Radio Frequency X-band Deflecting Cavity Fabrication and Validation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP050, pp. 2211-2213. 
[n]	L. Hendrickson et al., “Fast Feedback for Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE03, pp. 2389-2393. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search