Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. D. Hudson, “Dual Arc Chamber Heavy Ion Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2702-2705.
[n] P. S. Yoon, C. L. Bohn, and W. Chou, “Simulations of Error-Induced Beam Degradation in Fermilab's Booster Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT015, pp. 1458-1460.
[n] A. Mosnier, S. Chel, X. Hanus, A. Novokhatski, and G. Flynn, “Design of a Heavily Damped Superconducting Cavity for SOLEIL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V029, pp. 1709-1711.
[n] X. Z. Qiu, X. J. Wang, K. Batchelor, and I. Ben-Zvi, “Transition Radiation Electron Beam Diagnostic Study at ATF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB01, pp. 2530-2532.
[n] N. Liu, G. Liu, and T. Wang, “Low Energy Injection in a Compact Synchrotron Radiation Storage Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 568-570.
[n] W. Chou, “An 8-GeV Synchrotron-Based Proton Driver”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE005, pp. 1551-1553.
[n] S. Scheloske and J. M. Mosthaf, “Overview of the Personnel Safety System at the Heidelberg Ion Therapy Facility”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP005, pp. 88-90.
[n] E. Tanke, M. Eshraqi, Y. I. Levinsen, A. Ponton, and S. Valero, “Status of and Plans for the Beam Dynamics Program DYNAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 80-82. doi:10.18429/JACoW-LINAC2016-MOPRC007
[n] A. Burrill et al., “BERLinPro Booster Cavity Design, Fabrication and Test Plans”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP072, pp. 1019-1022.
[n] C. J. Liaw, J. M. Brennan, V. De Monte, K. Mernick, M. Myers, and J. E. Tuozzolo, “Robust Mechanical Design for RHIC Transverse Stochastic Cooling Pickup”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO08, pp. 1316-1318.
[n] V. Vogel et al., “Testing of the First Part of Series Production 10MW MBKs for the XFEL Project.”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP023, pp. 481-483.
[n] C. Belver-Aguilar and M. J. Barnes, “Review of Stripline Beam Impedance: Application to the Extraction Kicker for the CLIC Damping Rings”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3499-3502. doi:10.18429/JACoW-IPAC2017-WEPVA101
[n] W. Decking and D. Robin, “Dynamic Aperture Measurements at the Advanced Light Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP45, pp. 1581-1583.
[n] R. V. Latham, “Field - Induced Electron Emission from Localized Sites on Extended - Area Electrodes”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-29, pp. XX-XX.
[n] B. M. Moftah, S. Aldelaijan, F. M. Alrumayan, F. Alzorkani, S. Devic, and M. Shehadeh, “Characterization of the CS30 Cyclotron at KFSH&RC for Radiotherapy Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPSH008, pp. 400-402.
[n] G. Cuttone, “STATUS OF THE EXCYT PROJECT”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 21A6, pp. XX-XX.
[n] B. Beutner, “Emittance Measurement Procedures for the SwissFEL 250MeV Injector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC36, pp. 111-114.
[n] Y. Nosochkov, K. J. Bertsche, and M. K. Sullivan, “Compensation of Detector Solenoid in SUPER-B”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP072, pp. 2267-2269.
[n] S. Biedron, A. L. Edelen, and S. V. Milton, “Intelligent Controls and Modeling for Particle Accelerators and Other Research and Industrial Infrastructures”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 156-159. doi:10.18429/JACoW-PCaPAC2018-THCB5
For LaTeX
Use Complete Form
For BibTeX
References
- E. D. Hudson, “Dual Arc Chamber Heavy Ion Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2702-2705.
- P. S. Yoon, C. L. Bohn, and W. Chou, “Simulations of Error-Induced Beam Degradation in Fermilab's Booster Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT015, pp. 1458-1460.
- A. Mosnier, S. Chel, X. Hanus, A. Novokhatski, and G. Flynn, “Design of a Heavily Damped Superconducting Cavity for SOLEIL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V029, pp. 1709-1711.
- X. Z. Qiu, X. J. Wang, K. Batchelor, and I. Ben-Zvi, “Transition Radiation Electron Beam Diagnostic Study at ATF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB01, pp. 2530-2532.
- N. Liu, G. Liu, and T. Wang, “Low Energy Injection in a Compact Synchrotron Radiation Storage Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 568-570.
- W. Chou, “An 8-GeV Synchrotron-Based Proton Driver”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE005, pp. 1551-1553.
- S. Scheloske and J. M. Mosthaf, “Overview of the Personnel Safety System at the Heidelberg Ion Therapy Facility”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP005, pp. 88-90.
- E. Tanke, M. Eshraqi, Y. I. Levinsen, A. Ponton, and S. Valero, “Status of and Plans for the Beam Dynamics Program DYNAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 80-82.
- A. Burrill et al., “BERLinPro Booster Cavity Design, Fabrication and Test Plans”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP072, pp. 1019-1022.
- C. J. Liaw, J. M. Brennan, V. De Monte, K. Mernick, M. Myers, and J. E. Tuozzolo, “Robust Mechanical Design for RHIC Transverse Stochastic Cooling Pickup”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO08, pp. 1316-1318.
- V. Vogel et al., “Testing of the First Part of Series Production 10MW MBKs for the XFEL Project.”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP023, pp. 481-483.
- C. Belver-Aguilar and M. J. Barnes, “Review of Stripline Beam Impedance: Application to the Extraction Kicker for the CLIC Damping Rings”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3499-3502.
- W. Decking and D. Robin, “Dynamic Aperture Measurements at the Advanced Light Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP45, pp. 1581-1583.
- R. V. Latham, “Field - Induced Electron Emission from Localized Sites on Extended - Area Electrodes”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-29, pp. XX-XX.
- B. M. Moftah, S. Aldelaijan, F. M. Alrumayan, F. Alzorkani, S. Devic, and M. Shehadeh, “Characterization of the CS30 Cyclotron at KFSH&RC for Radiotherapy Applications”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPSH008, pp. 400-402.
- G. Cuttone, “STATUS OF THE EXCYT PROJECT”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 21A6, pp. XX-XX.
- B. Beutner, “Emittance Measurement Procedures for the SwissFEL 250MeV Injector”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC36, pp. 111-114.
- Y. Nosochkov, K. J. Bertsche, and M. K. Sullivan, “Compensation of Detector Solenoid in SUPER-B”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP072, pp. 2267-2269.
- S. Biedron, A. L. Edelen, and S. V. Milton, “Intelligent Controls and Modeling for Particle Accelerators and Other Research and Industrial Infrastructures”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 156-159.
Back to search