Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Paoloni, S. Bettoni, M. E. Biagini, P. Raimondi, and M. K. Sullivan, “Advances in the Studies of the Magnetic Design for the Final Focus Quadrupoles of the SuperB”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP045, pp. 238-240.
[n] S. Kusano, M. Tanaka, K. Furukawa, N. Kamikubota, M. Satoh, and N. Yamamoto, “The Operation Logbook System at KEKB Linac and Ring”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP528, pp. XX-XX.
[n] I. M. Kapchinsky, A. Lombardi, and A. Pisent, “H- Injector for ADRIA”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-71, pp. 811-813.
[n] S. Pei et al., “Progress on the Design and Construction of the 100 MeV / 100 kW Electron Linac for the NSC KIPT Neutron Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB023, pp. 222-224.
[n] A. Lombardi, “The New Superconducting Positive Ion Injector for the Legnaro ALPI Booster”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP30, pp. 125-127.
[n] Y. Jiao, Y. Cai, and A. Chao, “Transverse Emittance Reduction with Tapered Foil”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC045, pp. 2112-2114.
[n] T. Suwada and M. Satoh, “New Laser-Based Alignment System for the 500-m-long KEK Electron/Positron Injector Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB057, pp. 2821-2823.
[n] L. Zhang, “Vibration Damping Device Development for the ESRF Storage Ring Magnet Girder Assembly”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B14, pp. 2489-2494.
[n] S. Seletskiy et al., “Precise Beam Velocity Matching for the Experimental Demonstration of Ion Cooling With a Bunched Electron Beam”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 356-359. doi:10.18429/JACoW-NAPAC2019-TUZBB3
[n] M. Pabst, “A Design Concept for the SNQ Alvarez Linear Accelerator for Low Emittance Growth”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0021, pp. 383-385.
[n] G. V. Lamanna, A. Lombardi, and A. Pisent, “Test of a Radio-Frequency Quadrupole Cold Model”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA60, pp. 3522-3524.
[n] M. Basten et al., “Status of the First CH-Cavities for the New Superconducting CW Heavy Ion LINAC@GSI”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 886-888. doi:10.18429/JACoW-IPAC2016-MOPOY019
[n] K. Honkavaara, B. Faatz, J. Feldhaus, S. Schreiber, R. Treusch, and M. Vogt, “FLASH: First Soft X-ray FEL Operating Two Undulator Beamlines Simultaneously”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper WEB05, pp. 635-639.
[n] M. Satoh, “Simultaneous Top-Up Injection Into four Storage Rings at SuperKEKB”, in Proc. IPAC'20, Caen, France, May 2020, paper MOZPLM01, pp. XX-XX.
[n] L. A. C. Piazza et al., “Status of the SPES Project: a Neutron Rich ISOL Facility for Re-accelerated RIBs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP077, pp. 3913-3914.
[n] M. Satoh, T. Suwada, and K. Furukawa, “Fast Data-Acquisition System for the Beam-Energy-Spread-Monitor”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP578, pp. XX-XX.
[n] J.-P. Carneiro et al., “Beam Loss Due to Misalignments, RF Jitter and Mismatch in the Fermilab Project-X 3GeV CW Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP056, pp. 3868-3870.
[n] H. Sugimura et al., “Synchronized Timing and Control System Construction of SuperKEKB Positron Damping Ring”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 229-231. doi:10.18429/JACoW-ICALEPCS2017-TUCPL02
[n] S. A. Belomestnykh et al., “Commissioning of the 112 MHz SRF Gun and 500 MHz Bunching Cavities for the CeC PoP Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3597-3599. doi:10.18429/JACoW-IPAC2015-WEPWI049
[n] M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Upgrade of BPM DAQ System for SuperKEKB Injector Linac”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC033, pp. 1153-1156.
[n] L. Zhang, “Thermal Deformation Modelling Attempt of a Storage Ring Vacuum Vessel”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B13, pp. 2486-2488.
[n] L. Zang, I. R. Bailey, and A. Wolski, “Studies on the Role of a Photon Collimator for the ILC Positron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP079, pp. 733-735.
[n] L. Yu, J. S. Cao, H. Geng, C. Meng, and Y. F. Sui, “Design and Application of the Wire Scanner for CADS Proton Beams”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 265-267. doi:10.18429/JACoW-IBIC2016-MOPG77
[n] T. Kume, K. Furukawa, E. Okuyama, M. Satoh, and T. Suwada, “Straightness Alignment of Linac by Detecting Slope Angle”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB055, pp. 2815-2817.
[n] M. Schwarz et al., “Beam Dynamics for the SC CW Heavy Ion LINAC at GSI”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3742-3744. doi:10.18429/JACoW-IPAC2015-THPF025
[n] A. Saini, V. A. Lebedev, J.-F. Ostiguy, N. Solyak, and V. P. Yakovlev, “Design of Superconducting CW linac for PIP-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 565-567. doi:10.18429/JACoW-IPAC2015-MOPMA014
[n] Y. Shimosaki and K. Kobayashi, “Electricity Generation from Scattered Secondary Particles Induced by Synchrotron Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB064, pp. 2839-2841.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Paoloni, S. Bettoni, M. E. Biagini, P. Raimondi, and M. K. Sullivan, “Advances in the Studies of the Magnetic Design for the Final Focus Quadrupoles of the SuperB”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP045, pp. 238-240.
- S. Kusano, M. Tanaka, K. Furukawa, N. Kamikubota, M. Satoh, and N. Yamamoto, “The Operation Logbook System at KEKB Linac and Ring”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP528, pp. XX-XX.
- I. M. Kapchinsky, A. Lombardi, and A. Pisent, “H- Injector for ADRIA”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-71, pp. 811-813.
- S. Pei et al., “Progress on the Design and Construction of the 100 MeV / 100 kW Electron Linac for the NSC KIPT Neutron Source”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB023, pp. 222-224.
- A. Lombardi, “The New Superconducting Positive Ion Injector for the Legnaro ALPI Booster”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP30, pp. 125-127.
- Y. Jiao, Y. Cai, and A. Chao, “Transverse Emittance Reduction with Tapered Foil”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC045, pp. 2112-2114.
- T. Suwada and M. Satoh, “New Laser-Based Alignment System for the 500-m-long KEK Electron/Positron Injector Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB057, pp. 2821-2823.
- L. Zhang, “Vibration Damping Device Development for the ESRF Storage Ring Magnet Girder Assembly”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5B14, pp. 2489-2494.
- S. Seletskiy et al., “Precise Beam Velocity Matching for the Experimental Demonstration of Ion Cooling With a Bunched Electron Beam”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 356-359.
- M. Pabst, “A Design Concept for the SNQ Alvarez Linear Accelerator for Low Emittance Growth”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0021, pp. 383-385.
- G. V. Lamanna, A. Lombardi, and A. Pisent, “Test of a Radio-Frequency Quadrupole Cold Model”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA60, pp. 3522-3524.
- M. Basten et al., “Status of the First CH-Cavities for the New Superconducting CW Heavy Ion LINAC@GSI”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 886-888.
- K. Honkavaara, B. Faatz, J. Feldhaus, S. Schreiber, R. Treusch, and M. Vogt, “FLASH: First Soft X-ray FEL Operating Two Undulator Beamlines Simultaneously”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper WEB05, pp. 635-639.
- M. Satoh, “Simultaneous Top-Up Injection Into four Storage Rings at SuperKEKB”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOZPLM01, pp. XX-XX.
- L. A. C. Piazza et al., “Status of the SPES Project: a Neutron Rich ISOL Facility for Re-accelerated RIBs”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP077, pp. 3913-3914.
- M. Satoh, T. Suwada, and K. Furukawa, “Fast Data-Acquisition System for the Beam-Energy-Spread-Monitor”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP578, pp. XX-XX.
- J.-P. Carneiro et al., “Beam Loss Due to Misalignments, RF Jitter and Mismatch in the Fermilab Project-X 3GeV CW Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP056, pp. 3868-3870.
- H. Sugimura et al., “Synchronized Timing and Control System Construction of SuperKEKB Positron Damping Ring”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 229-231.
- S. A. Belomestnykh et al., “Commissioning of the 112 MHz SRF Gun and 500 MHz Bunching Cavities for the CeC PoP Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3597-3599.
- M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Upgrade of BPM DAQ System for SuperKEKB Injector Linac”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC033, pp. 1153-1156.
- L. Zhang, “Thermal Deformation Modelling Attempt of a Storage Ring Vacuum Vessel”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5B13, pp. 2486-2488.
- L. Zang, I. R. Bailey, and A. Wolski, “Studies on the Role of a Photon Collimator for the ILC Positron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP079, pp. 733-735.
- L. Yu, J. S. Cao, H. Geng, C. Meng, and Y. F. Sui, “Design and Application of the Wire Scanner for CADS Proton Beams”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 265-267.
- T. Kume, K. Furukawa, E. Okuyama, M. Satoh, and T. Suwada, “Straightness Alignment of Linac by Detecting Slope Angle”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB055, pp. 2815-2817.
- M. Schwarz et al., “Beam Dynamics for the SC CW Heavy Ion LINAC at GSI”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3742-3744.
- A. Saini, V. A. Lebedev, J.-F. Ostiguy, N. Solyak, and V. P. Yakovlev, “Design of Superconducting CW linac for PIP-II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 565-567.
- Y. Shimosaki and K. Kobayashi, “Electricity Generation from Scattered Secondary Particles Induced by Synchrotron Radiation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB064, pp. 2839-2841.
Back to search