JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Krecic, A. Carniel, E. Karantzoulis, and F. Tripaldi, “Preparations of the Elettra booster for Elettra 2.0”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2988-2990. doi:10.18429/JACoW-IPAC2024-THPC12
[n]	C. C. Wilcox, B. Jones, A. Pertica, and R. E. Williamson, “An Investigation into the Behaviour of Residual Gas Ionisation Profile Monitors in the ISIS Extracted Beamline”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 807-810. doi:10.18429/JACoW-IBIC2016-WEPG68
[n]	Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX. 
[n]	V. Kumar, K.-J. Kim, and D. Li, “Comparison of Codes for Smith-Purcell FEL”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA039, pp. 166-168. 
[n]	J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2381-2383. doi:10.18429/JACoW-IPAC2018-WEPMF008
[n]	L. J. Rybarcyk, “Longitudinal Tracking Studies for the AHF Booster Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE010, pp. 1566-1568. 
[n]	N. Yu. Kazarinov, G. Gulbekyan, V. I. Kazacha, V. N. Melnikov, and V. I. Mironov, “Scheme for Flattening of Ion Density Distribution on a Target”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN079, pp. 1556-1558. 
[n]	D. W. Posthuma de Boer and A. Pertica, “Thermal Simulations of Wire Profile Monitors in ISIS Extracted Proton Beamline 1”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 785-787. doi:10.18429/JACoW-IBIC2016-WEPG59
[n]	W. Lawson, J. P. Calame, J. Cheng, V. L. Granatstein, P. E. Latham, and M. Reiser, “Experimental Design of 100 MW X-Band and Ku-Band Gyroklystrons (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-35, pp. 448-450. 
[n]	N. Delerue, J. Barros, M. Vieille Grosjean, O. A. Bezshyyko, and V. Khodnevych, “Study of Phase Reconstruction Techniques applied to Smith-Purcell Radiation Measurements”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3436-3438. doi:10.18429/JACoW-IPAC2014-THPME088
[n]	E. W. Nissen, A. Hutton, and A. J. Kimber, “A Harmonic Kicker Scheme for the Circulator Cooler Ring in the Medium Energy Electron-ion Collider”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO078, pp. 1061-1063. 
[n]	D. C. Plostinar and E. Zh. Sargsyan, “Comparative Study of Beam Dynamics in LINAC4 using CERN and RAL MEBT (Medium Energy Beam Transport) Lines”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN115, pp. 1646-1648. 
[n]	W. A. Pellico and D. Wildman, “Booster's Coupled Bunch Damper Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB077, pp. 3177-3179. 
[n]	H. O. Moser et al., “Singapore Synchrotron Light Source-- Helios 2 and Beyond”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF060, pp. 2400-2402. 
[n]	H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347. 
[n]	Z.-F. He, D. M. Li, Y. H. Liu, S. L. Wang, J.-L. Zhang, and Y.-T. Zhang, “CW-type HV Power Supply of 50 Hz and its Application in Accelerator Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA018, pp. 699-701. 
[n]	N. Merminga and K. Y. Ng, “Analytical Expressions for the Smear Due to Nonlinear Multipoles”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1286-1289. 
[n]	M. Justus et al., “Upgrade of the Machine Interlock System for the ELBE Accelerator Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 469-471. doi:10.18429/JACoW-IPAC2014-MOPME044
[n]	M. G. Billing, M. Giannella, R. M. Littauer, and G. R. Rouse, “Interaction of CESR Vacuum Pumps with Stored Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1163-1166. 
[n]	T. Endo et al., “Fast Betatron Tune Controller for Circulating Beam in a Synchrotron”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D032, pp. 468-470. 
[n]	N. C. E. Crosland, “Lifetime Studies in Helios 1”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1350-1353. 
[n]	V. E. Scarpine, A. H. Lumpkin, and G. R. Tassotto, “OTR Imaging of Intense 120 GeV Protons in the NuMI Beamline at FNAL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAC02, pp. 2639-2641. 
[n]	A. V. Fedotov, R. L. Gluckstern, S. S. Kurennoy, and R. Ryne, “Halo Formation in Spheroidal Bunches with Self-Consistent Stationary Distributions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP15C, pp. 1115-1117. 
[n]	M. M. Holland and S. E. Metelits, “Final Design and Initial Performance of the Nevis Secondary Beam Channel”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-20, pp. 299-305. 
[n]	D. Y. Shchegolkov, E. I. Simakov, and A. Zholents, “Simulation Studies of BBU Suppression Methods and Acceptable Tolerances in Dielectric Wakefield Accelerators”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2685-2688. doi:10.18429/JACoW-IPAC2015-WEPJE007
[n]	M. E. Schulze et al., “Characterization of the Proton Beam from the 6.7 MeV LEDA RFQ”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA011, pp. 591-593. 
[n]	R. L. Kustom, J. J. Song, D. M. Grudzien, and H. J. Moe, “Radiation Measurements During Cavities Conditioning on APS RF Test Stand”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2213-2216. 
[n]	E. Chojnacki et al., “Accelerator Deflection-Mode Dampening Experiments at Argonne”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU451, pp. 447-449. 
[n]	R. Ferdinand et al., “SPIRAL 2 RFQ Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT076, pp. 2026-2028. 
[n]	P. Jiang and Y. J. Yuan, “A 5.3 MeV/U, 200MHz APF DTL for Carbon Ions as an Injector of Medical Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO056, pp. 3890-3894. 
[n]	P. Fernandes, R. Parodi, and A. Schenone, “Design of a Prototype Disk and Washer Structure for a High Intensity Electron Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-11, pp. 550-552. 
[n]	P. S. Miller, “Status Report on the 500 MeV Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CC-01, pp. 191-195. 
[n]	V. E. Scarpine, C. W. Lindenmeyer, A. H. Lumpkin, and G. R. Tassotto, “Development of an Optical Transition Radiation Detector for Profile Monitoring of Antiproton and Proton Beams at FNAL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT035, pp. 2381-2383. 
[n]	Q. Z. Xing et al., “Present Status of the High Current Proton Linac at Tsinghua University and Its Beam Measurements and Applications”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO3AB01, pp. 208-210. 
[n]	G. N. Kim et al., “Status of Pohang Neutron Facility Based on 100-MeV Electron Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU432, pp. 383-385. 
[n]	J. A. Carter, “Benchmarking and Calibration of Monte Carlo Vacuum Simulations with SynRad and MolFlow+”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3695-3697. doi:10.18429/JACoW-IPAC2016-THPMY018
[n]	H. Nakayama et al., “A Measurement System Using GP-IB for a Magnetic Core Test Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D007, pp. 393-395. 
[n]	T. Carlisle, J. H. Cobb, and R. R. M. Fletcher, “Ionization Cooling in MICE Step IV”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ036, pp. 877-879. 
[n]	P. Li et al., “Concept Design of the Collimation System in the CSRm”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH09, pp. 44-47. 
[n]	J. A. Nolen and P. S. Miller, “Improved Energy Resolution with the MSU Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-08, pp. 249-253. 
[n]	E. Kako et al., “Development of Superconducting Cavities for High Gradient Applications”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1272-1275. 
[n]	I. D. Kaganovich, R. C. Davidson, E. P. Lee, S. O, and E. A. Startsev, “Plasma Neutralization Models for Intense Ion Beam Transport in Plasma”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG039, pp. 2975-2977. 
[n]	H. Reymond, O. O. Andreassen, C. Charrondi?¿re, G. Lehmann Miotto, A. Rijllart, and D. Scannicchio, “Lhc Dipole Magnet Splice Resistance From Sm18 Data Mining”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN007, pp. 98-101. 
[n]	O. E. Krivosheev, S. Korenev, A. Kolchuzhkin, and I. Tropin, “Distribution of Absorbed Doses in the Materials Irradiated by "Rhodotron" Electron Accelerator: Experiment and Monte Carlo Simulations”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH025, pp. 2500-2502. 
[n]	A. Faus-Golfe, I. Efthymiopoulos, P. Grafstrom, M. Haguenauer, and M. Rijssenbeek, “A Very High-beta Optics to be used for an Absolute Luminosity Determination with Forward Detectors in ATLAS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT049, pp. 659-661. 
[n]	T. L. Hart, T. H. Luo, D. J. Summers, and K. Paul, “End-to-End G4Beamline Simulation of an Inverse Cyclotron for Muon Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC046, pp. 238-240. 
[n]	J. Norem et al., “The Interactions of Surface Damage on RF Cavity Operation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH146, pp. 1361-1363. 
[n]	R. P. Johnson et al., “Tunable RF Cavities Using Orthogonally Biased Ferrite”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP018, pp. 849-851. 
[n]	J. Chen et al., “Control System for the Superconducting Wavelength Shifter of SRRC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO005, pp. 2010-2012. 
[n]	C. Mayer-B?Âricke, “Applications of Cyclotrons in Nuclear Physics (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper G-01, pp. 481-487. 
[n]	M. Borland, J. A. Carter, H. Cease, and B. K. Stillwell, “Simulation of Gas-Scattering Lifetime using Position- and Species-Dependent Pressure and Aperture Profiles”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 546-548. doi:10.18429/JACoW-IPAC2015-MOPMA008
[n]	L. Xiao, C.-K. Ng, J. E. Dey, I. Kourbanis, and Z. Qian, “Simulation and Optimization of Project-X Main Injector Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP187, pp. 1840-1842. 
[n]	S. Ahmed et al., “High Power Test of RF Separator For 12 GeV Upgrade of CEBAF at Jefferson Lab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR030, pp. 4032-4034. 
[n]	N. Nakamura, “Review of ERL Projects at KEK and Around the World”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUXB02, pp. 1040-1044. 
[n]	F. Naito et al., “New Engineering Techniques used in a High-Power Model of the 432 MHz DTL”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-36, pp. 134-136. 
[n]	S. Krecic, A. Carniel, and F. Tripaldi, “Emittance reduction of the actual Booster for Elettra2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3155-3157. doi:10.18429/JACoW-IPAC2023-WEPL022
[n]	H. Jaeckle, F. Jenni, and X. H. Ke, “Practical Experience with Self-optimizing, High Dynamic Control of Accelerator Magnet Power Supplies”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO011, pp. 3355-3357. 
[n]	A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127. 
[n]	D. Huang et al., “RF Studies at Fermilab MuCool Test Area”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP032, pp. 888-890. 
[n]	R. Racz et al., “Application of an ECR Ion Source for Ionic Functionalization of Implant Materials on the Nanoscale”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH02, pp. 135-139. 
[n]	S. H. Liu, Y. He, and Z. J. Wang, “DESIGN STUDIES OF THE C-ADS MAIN LINAC WITH ONLY SPOKE CAVITIES”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA025, pp. 1781-1783. 
[n]	S. Henderson et al., “SNS Beam Commisioning Status”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT168, pp. 1524-1526. 
[n]	Y. Lei, X. Guan, R. Tang, X. W. Wang, Q. Z. Xing, and S. X. Zheng, “Experimental Study of Tuning Method on a Model Alvarez DTL Cavity for CPHS Project”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 756-758. doi:10.18429/JACoW-LINAC2018-THPO034
[n]	M. A. Tiunov et al., “5-10 MEV Industrial High Power Electron Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO039, pp. 2813-2815. 
[n]	H. Qin, R. C. Davidson, and E. A. Startsev, “Delta-f Simulation Studies of the Ion-Electron Two-Stream Instability in IBX”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB052, pp. 3120-3122. 
[n]	J. T. Seeman et al., “Summary of the Emittance Control in the SLC Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2064-2067. 
[n]	M. Aiba et al., “Study of Acceptance of FFAG Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE063, pp. 1226-1228. 
[n]	M.-S. Yeh, L. H. Chang, K.-T. Hsu, M.-C. Lin, G.-H. Luo, and Ch. E. Wang, “Electronic System for Superconducting RF Module at the Synchrotron Radiation Research Center”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO034, pp. 2295-2297. 
[n]	G. Hemmie et al., “Design, Construction and Performance of the DESY II Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3625-3628. 
[n]	M. A. Plum et al., “SNS Ring Commissioning Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH131, pp. 351-353. 
[n]	B. E. Carlsten, G. R. Magelssen, B. D. McVey, L. M. Young, and E. M. Svaton, “Magnetic Bunchers for the Generation of High Peak Current, Low Emittance Electron Pulses at Medium Energy”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH421, pp. 641-643. 
[n]	A. W. Davidson et al., “Numerical Study of Self and Controlled Injection in 3-Dimensional Laser-Driven Wakefields”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP101, pp. 286-288. 
[n]	W. L. Chen et al., “CIADS Normal Temperature Front-End Design”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 267-270. doi:10.18429/JACoW-LINAC2016-MOPLR060
[n]	A. Kitagawa, S. Biri, A. G. Drentje, M. Muramatsu, W. Takasugi, and M. Wakaisami, “Production of Multi-Charged Ions for Experimental Use at HIMAC”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-12, pp. 92-95. 
[n]	T. Margreiter, I. De Cesaris, T. Gadner, M. Incurvati, S. Pelletier, and R. Teixeira, “High-oower modular GaN based power supply for MedAustron scanning magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3739-3742. doi:10.18429/JACoW-IPAC2023-WEPM075
[n]	V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818. 
[n]	E. Zaplatin, W. Braeutigam, M. Pap, M. Skrobucha, and R. Stassen, “Low-Beta SC H-Cavity for ESS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO018, pp. 2300-2301. 
[n]	J. L. Turner et al., “FEL Beam Stability in the LCLS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP168, pp. 2423-2425. 
[n]	S. H. Liu, Y. He, and Z. J. Wang, “Optimization of the Superconducting Section of Injector II for C-ADS”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP232, pp. 122-124. 
[n]	R. Nagai et al., “High-Voltage Test of a 500-kV Photo-Cathode DC Gun for the ERL Light Sources in Japan”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE093, pp. 2341-2343. 
[n]	T. L. Hart, “MICE: the International Muon Ionization Cooling Experiment: Phase Space Cooling Measurement”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS014, pp. 3543-3545. 
[n]	V. N. Pavlenko et al., “Characterization of Femtosecond-Laser-Induced Electron Emission from Diamond Nano-Tips”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 228-231. doi:10.18429/JACoW-NAPAC2019-MOPLH25
[n]	St. Schnabel, M. Emmenegger, F. Jenni, H. J?ñckel, and R. Kuenzi, “New Generation of AD-measurement Cards for High Accuracy Measurements”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP129, pp. 3664-3666. 
[n]	E. Zaplatin, M. Pap, and R. T?Âlle, “HIPPI Triple-spoke Cavity Design”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH158, pp. 427-429. 
[n]	A. Reichold et al., “The LiCAS-RTRS -- A Survey System for the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH195, pp. 520-522. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search