Favourites
For Word
[n] L. Dovlatyan, B. L. Beaudoin, R. A. Kishek, and K. J. Ruisard, “Steering Optimizations for the University of Maryland Electron Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4913-4916. doi:10.18429/JACoW-IPAC2018-THPML107
[n] K. Tian, A. Ringwall, and J. J. Sebek, “Beam-Based Measurement on the Performance of Ferrite Dampers in an In-Vacuum Undulator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 331-334. doi:10.18429/JACoW-IPAC2021-MOPAB088
[n] T. Fujita, S. Sasaki, M. Shoji, and T. Takashima, “Commissioning and Status of New BPM Electronics for COD Measurement at the SPring-8 Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN031, pp. 3997-3999.
[n] Z. K. Liu et al., “RF Data Acquisition and Soft Alarm System for the Taiwan Photon Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4039-4041. doi:10.18429/JACoW-IPAC2019-THPRB093
[n] A. Schaller, J. Fitzek, D. Lorenz, and F. Wolf, “Optimized Calculation of Timing for Parallel Beam Operation at the FAIR Accelerator Complex”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 411-415. doi:10.18429/JACoW-ICALEPCS2017-TUPHA019
[n] S. Crispel et al., “Cryogenic System Design for SPIRAL2 LINAC Project at GANIL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA068, pp. 3825-3827.
[n] S. An, Z. Bowen, J. L. Linling, J. H. Yue, and L. Zhang, “Development of a Cw Solid State Amplifier for the Longitudinal Feedback System of Bepcii”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2796-2798. doi:10.18429/JACoW-IPAC2016-WEPOR056
[n] Y. Hashimoto et al., “Multi-Ribbon Profile Monitor Using Carbon Graphite Foil for J-PARC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2A01, pp. 429-433.
[n] M. Ben Abdillah, P. Ausset, and R. Ferdinand, “Results of SPIRAL2 Beam Position Monitors on the Test Bench of the RFQ”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 261-264. doi:10.18429/JACoW-IBIC2018-TUPB03
[n] M. J. Shirakata and T. Oogoe, “Upgrade of Radiation Shield for BT Collimators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC081, pp. 4246-4248.
[n] Y. K. Wu et al., “An VUV FEL for Producing Circularly Polarized Compton Gamma-ray Beams in the 70 to 100 MeV Region”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCS6, pp. 778-780.
[n] Y. Shirakabe et al., “Ramp;D Status of the Fast Extraction Kicker Magnets for the KEK/JAERI 50 GeV Synchrotron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT077, pp. 1333-1335.
[n] K.-B. Liu and C.-S. Fann, “Reducing Output Current Ripple of Power Supply with Component Replacement”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF056, pp. 1732-1734.
[n] J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Dovlatyan, B. L. Beaudoin, R. A. Kishek, and K. J. Ruisard, “Steering Optimizations for the University of Maryland Electron Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4913-4916.
- K. Tian, A. Ringwall, and J. J. Sebek, “Beam-Based Measurement on the Performance of Ferrite Dampers in an In-Vacuum Undulator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 331-334.
- T. Fujita, S. Sasaki, M. Shoji, and T. Takashima, “Commissioning and Status of New BPM Electronics for COD Measurement at the SPring-8 Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN031, pp. 3997-3999.
- Z. K. Liu et al., “RF Data Acquisition and Soft Alarm System for the Taiwan Photon Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4039-4041.
- A. Schaller, J. Fitzek, D. Lorenz, and F. Wolf, “Optimized Calculation of Timing for Parallel Beam Operation at the FAIR Accelerator Complex”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 411-415.
- S. Crispel et al., “Cryogenic System Design for SPIRAL2 LINAC Project at GANIL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA068, pp. 3825-3827.
- S. An, Z. Bowen, J. L. Linling, J. H. Yue, and L. Zhang, “Development of a Cw Solid State Amplifier for the Longitudinal Feedback System of Bepcii”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2796-2798.
- Y. Hashimoto et al., “Multi-Ribbon Profile Monitor Using Carbon Graphite Foil for J-PARC”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2A01, pp. 429-433.
- M. Ben Abdillah, P. Ausset, and R. Ferdinand, “Results of SPIRAL2 Beam Position Monitors on the Test Bench of the RFQ”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 261-264.
- M. J. Shirakata and T. Oogoe, “Upgrade of Radiation Shield for BT Collimators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC081, pp. 4246-4248.
- Y. K. Wu et al., “An VUV FEL for Producing Circularly Polarized Compton Gamma-ray Beams in the 70 to 100 MeV Region”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOCS6, pp. 778-780.
- Y. Shirakabe et al., “Ramp;D Status of the Fast Extraction Kicker Magnets for the KEK/JAERI 50 GeV Synchrotron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT077, pp. 1333-1335.
- K.-B. Liu and C.-S. Fann, “Reducing Output Current Ripple of Power Supply with Component Replacement”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF056, pp. 1732-1734.
- J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
Back to search