JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune and Bunch Length Measurements of SRRC Booster During Ramping”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1684-1687. 
[n]	J. Billan, J. P. Gourber, and K. N. Henrichsen, “Determination of the Particle Momentum in LEP from Precise Magnet Measurements”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2122-2125. 
[n]	Q. Z. Xing et al., “Design of the CPHS RFQ Linac at Tsinghua University”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD047, pp. 792-794. 
[n]	R. Maier et al., “Invited Paper: Commissioning of the Cooler Synchrotron COSY”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper F-01, pp. 338-344. 
[n]	S. Biehe, L. Bin, and X. Hongwen, “Studies on New-Type Full-Ion Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-08, pp. 423-426. 
[n]	T. Hoffmann Gesellschaft f??r Schwerionenforschung and D. A. Liakin Institute for Theoretical and Experimental Physics, “Control and Data Analysis for Emittance Measuring Devices”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS10, pp. XX-XX. 
[n]	V. V. Parkhomchuk, A. V. Bubley, V. M. Panasyuk, and V. B. Reva, “Electron Cooling for the Therapy Accelerator Complex”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper FRM1MCIO01, pp. 168-172. 
[n]	S. Dobrescu et al., “Upgrade of the Bucharest FN Tandem Accelerator”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-02, pp. 31-35. 
[n]	J. Ohnishi, A. Goto, M. Kase, and Y. Kotaka, “Study on Energy Upgrade and Beam Transmission Efficiencies for RIKEN K-70 AVF Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 332-335. doi:10.18429/JACoW-Cyclotrons2016-THP13
[n]	S. J. Ra, M. H. Jung, and K. R. Kim, “Activation and Discoloration of Polymer by Proton Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA037, pp. 151-153. 
[n]	D. Bulfone and P. Michelini, “The ELETTRA Power Supply Control System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1158-1161. 
[n]	X. D. Yang et al., “Beam Instability Phenomena Observed at HIRFL-CSR in the Presence of Electron Cooler”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOZCH01, pp. 33-37. 
[n]	M. H. Jung, J.-K. Kil, K. R. Kim, and S. J. Ra, “Study of the Installtion of a Small Animal Experiment Equipment in a MC-50 Cyclotron LEPT Beam Line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA018, pp. 103-105. 
[n]	D. Lipka et al., “FLASH Undulator BPM Commissioning and Beam Characterization Results”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF07, pp. 315-319. 
[n]	B. Keil et al., “A Generic BPM Electronics Platform for European XFEL, SwissFEL and SLS”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCB02, pp. 11-15. 
[n]	U. Lehnert et al., “Conceptual Design of a THz Facility at the ELBE Radiation Source”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPC05, pp. 656-659. 
[n]	R. Leewe, K. Fong, Z. Shahriari, and M. Moallem, “Reflected Power Based Extremum Seeking Control Algorithm to Tune the Resonance Frequency of Room Temperature Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4844-4846. doi:10.18429/JACoW-IPAC2018-THPML082
[n]	A-M. Valente-Feliciano et al., “ECR Nb Films Grown on Amorphous and Crystalline Cu Substrates: Influence of Ion Energy”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP079, pp. 631-634. 
[n]	S. An, Y.-S. Cho, B. H. Choi, and C. Gao, “PEFP Low-beta SRF Cavity Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN056, pp. 2164-2166. 
[n]	G. J. Waldschmidt, L. H. Morrison, R. Nassiri, R. A. Rimmer, K. Tian, and H. Wang, “Superconducting Multi-Cell Deflecting Cavity for Short-Pulse X-Ray Generation at the Advanced Photon Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP003, pp. 1087-1089. 
[n]	S. An, Y.-S. Cho, B. H. Choi, and C. Gao, “PEFP HOM Coupler Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN055, pp. 2161-2163. 
[n]	J. W. Xia et al., “Lattice of the CSR”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-05, pp. XX-XX. 
[n]	A. Kolomiets and A. S. Plastun, “RFQ With Improved Energy Gain”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB016, pp. 41-43. 
[n]	J. Chen, K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune Measurement of SRRC Booster during Ramping”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B06, pp. 645-647. 
[n]	V. M. Panasyuk, M. I. Bryzgunov, A. V. Bubley, V. K. Gosteev, V. V. Parkhomchuk, and V. B. Reva, “Magnetic System of Electron Cooler for COSY”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS10, pp. 114-117. 
[n]	A. Kolomiets and A. S. Plastun, “RFQ With Improved Energy Gain”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB050, pp. 966-968. 
[n]	F. Lemery, D. Mihalcea, P. Piot, J. Osterhoff, C. A. J. Palmer, and P. Stoltz, “Progress Toward a High-Transformer-Ratio Dielectric Wakefield Experiment at FLASH”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEEPPB001, pp. 2166-2168. 
[n]	K. T. Seol, Y.-S. Cho, D. I. Kim, H. S. Kim, H.-J. Kwon, and Y.-G. Song, “Installation and Operation of the RF System for the 100 MeV Proton Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI042, pp. 2797-2799. 
[n]	S. An, Y.-S. Cho, B. H. Choi, Y. M. Li, Y. Z. Tang, and L. Zhang, “Prototyping PEFP Low-Beta Copper Cavity and HOM Coupler”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP035, pp. 2070-2072. 
[n]	K. R. Kim, M. H. Jung, J.-K. Kil, and S. J. Ra, “Development of theTarget System for Large-Area Uniform Irradiation Using 2D Motional Stage”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA070, pp. 238-240. 
[n]	D. J. Wang, C. K. Kuan, H. C. Ho, S. Y. Perng, and J. R. Chen, “Mechanical Improvement in Beam Stability at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOM201, pp. XX-XX. 
[n]	R. Perret, R. Jung, and R. Valbuena, “Design of a New Generation of Collimators for LEP 200”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2202-2205. 
[n]	C. H. Chang et al., “Feasibility Study of a Compact Superconducting Wavelength Shifter at SRRC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B02, pp. 2331-2333. 
[n]	H. Haseroth, M. Hone, and J. L. Vallet, “The Compensation for Beam Loading on the Preinjector of the New CERN 50-MeV Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-8, pp. 444-447. 
[n]	J.-K. Kil, M. H. Jung, K. R. Kim, and S. J. Ra, “Platinum Nano Particle Synthesis by Proton Beam Irradiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA069, pp. 235-237. 
[n]	M. L. Neubauer, A. Dudas, R. Sah, R. A. Rimmer, and H. Wang, “Novel Crab Cavity RF Design”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP094, pp. 1006-1008. 
[n]	P. Frigola et al., “Advance Additive Manufacturing Method for SRF Cavities of Various Geometries”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB042, pp. 1181-1184. 
[n]	J. R. Chen, D. S. Lee, and Z. D. Tsai, “Cooling Air Flow Induced Thermal Deformation of the Magnet Lattice Girder”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B17, pp. 2435-2437. 
[n]	M. A. Green et al., “Progress on the Design of the Coupling Coils for Mice and Mucool”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS030, pp. 500-502. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search