Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 259. doi:10.18429/JACoW-MEDSI2020-WEPA14
[n] S. Y. Chen, D. Bertwistle, K. Kei, C. Murray, and T. M. Pedersen, “Application of a NEG Coated Chamber at the Canadian Light Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 205-208. doi:10.18429/JACoW-MEDSI2016-TUPE19
[n] G. Y. Jiang and G. H. Chen, “Embedded EPICS Controller in Inserting Devices of SSRF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA028, pp. 3204-3206.
[n] Y. Yang et al., “A high brightness electron beam research and application beamline at Tsinghua University”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2093-2096. doi:10.18429/JACoW-IPAC2023-TUPL152
[n] J. Rossbach, “Results from the VUV-FEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOZBPA01, pp. 34-38.
[n] G. Ascenção, M. Alves, L. Liu, and X. Resende, “Study of insertion devices effects in SIRIUS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1184-1187. doi:10.18429/JACoW-IPAC2023-MOPM088
[n] C. W. Roberson, “The Racetrack Induction Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3433-3436.
[n] N. Hubert, M. El Ajjouri, and D. P?®deau, “Test of New Beam Loss Monitors for SOLEIL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 215-218. doi:10.18429/JACoW-IBIC2018-TUPA03
[n] R. Broucquart, M. El Ajjouri, N. Hubert, S. M. Minolli, S. Poirier, and D. P?®deau, “CIEL: Current Injection Efficiency and Lifetime”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper WEPP02, unpublished.
[n] C. A. Swoboda, R. E. Daniels, and A. W. Maschke, “Oscilloscope Waveform Digitizer”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 369-371.
[n] L. Schlitt, L. Schlitt Consulting Services, and R. Genuario, “Magnetization Current Models for Ferrite Loaded LIA Cavities”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-03, pp. 531-534.
[n] M. Giovannozzi, F. Franchi, and M. George, “First Results of Space Charge Simulations for the Novel Multi-turn Injection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE081, pp. 4710-4712.
[n] R. Hou et al., “Field Measurements of PEP-II LER Dipoles and Quadrupoles at IHEP”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P020, pp. 3297-3299.
[n] A. Plaçais et al., “Automatic retuning of superconducting linacs using LightWin”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 563-568. doi:10.18429/JACoW-LINAC2024-THXA001
[n] D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Fabrication of Normalconducting Cavities for Accelerator Application”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 922-925.
[n] R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2818-2821. doi:10.18429/JACoW-IPAC2019-WEPRB011
[n] R. J. Adler, “Emittance Growth in Rippled Solenoidal Magnetic Fields”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1359-1361.
[n] A. V. Elzhov et al., “Study of Modified TBA Driver Scheme”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA5, pp. 3393-3395.
[n] E. Acerbi, G. Bellomo, M. Castiglioni, E. Fabrici, and F. Resmini, “Beam Extraction Studies for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1115-1118.
[n] M. Aslaninejad, M. J. Easton, J. Pasternak, K. J. Peach, J. K. Pozimski, and T. Yokoi, “The Design of the MEBT for the PAMELA Medical FFAG”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB034, pp. 3960-3962.
[n] M. Dohlus, A. Kabel, and T. Limberg, “Uncorrelated Emittance Growth in the TTF-FEL Bunch Compression Sections Due to Coherent Synchrotron Radiation and Space Charge Effects”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP34G, pp. 1192-1194.
[n] S. Fatehi, R. Aslani, and M. R. Khabbazi, “ILSF Storage Ring Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD007, pp. 3506-3508.
[n] L. Groening et al., “Coherent Synchrotron Radiation Measurements in the CLIC Test Facility (CFT2)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TH206, pp. 726-730.
[n] R. M Bryant, R. W. Carey, R. V. Claybourn, G. Pavel, and W. J. Schaefer, “National Ignition Facility Control Network Design and Analysis”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THDT004, pp. XX-XX.
[n] I. J. Gillingham and T. M. Cobb, “MalcolmJS: a Browser-Based Graphical User Interface”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1869-1872. doi:10.18429/JACoW-ICALEPCS2017-THPHA184
[n] A. J. T. Holmes, “The Development of High Current Singly Charged Ion Sources”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 93-98.
[n] J. E. Dey and I. Kourbanis, “A New Main Injector Radio Frequency System For 2.3 MW Project X Operations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP131, pp. 1079-1081.
[n] Y. W. Kang et al., “Development and Testing of High Power RF Vector Modulators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS075, pp. 2508-2510.
[n] M. Boussoukaya, M. Bergeret, R. Chehab, M. Franco, and B. Leblond, “Photoemission in Nanosecond and Picosecond Regimes Obtained from Macro and Micro Cathodes”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 325-328.
[n] B. Rusnak, P. Fitsos, M. Hall, P. Peaslee, and R. Souza, “A High-Intensity Neutron Production Source based on Rotary Valving”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA14, pp. 1385-1387.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 259.
- S. Y. Chen, D. Bertwistle, K. Kei, C. Murray, and T. M. Pedersen, “Application of a NEG Coated Chamber at the Canadian Light Source”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 205-208.
- G. Y. Jiang and G. H. Chen, “Embedded EPICS Controller in Inserting Devices of SSRF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA028, pp. 3204-3206.
- Y. Yang et al., “A high brightness electron beam research and application beamline at Tsinghua University”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL152, pp. 2093-2096.
- J. Rossbach, “Results from the VUV-FEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOZBPA01, pp. 34-38.
- G. Ascenção, M. Alves, L. Liu, and X. Resende, “Study of insertion devices effects in SIRIUS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM088, pp. 1184-1187.
- C. W. Roberson, “The Racetrack Induction Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3433-3436.
- N. Hubert, M. El Ajjouri, and D. P?®deau, “Test of New Beam Loss Monitors for SOLEIL”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 215-218.
- R. Broucquart, M. El Ajjouri, N. Hubert, S. M. Minolli, S. Poirier, and D. P?®deau, “CIEL: Current Injection Efficiency and Lifetime”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper WEPP02, unpublished.
- C. A. Swoboda, R. E. Daniels, and A. W. Maschke, “Oscilloscope Waveform Digitizer”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 369-371.
- L. Schlitt, L. Schlitt Consulting Services, and R. Genuario, “Magnetization Current Models for Ferrite Loaded LIA Cavities”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-03, pp. 531-534.
- M. Giovannozzi, F. Franchi, and M. George, “First Results of Space Charge Simulations for the Novel Multi-turn Injection”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE081, pp. 4710-4712.
- R. Hou et al., “Field Measurements of PEP-II LER Dipoles and Quadrupoles at IHEP”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P020, pp. 3297-3299.
- A. Plaçais et al., “Automatic retuning of superconducting linacs using LightWin”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 563-568.
- D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Fabrication of Normalconducting Cavities for Accelerator Application”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 922-925.
- R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2818-2821.
- R. J. Adler, “Emittance Growth in Rippled Solenoidal Magnetic Fields”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1359-1361.
- A. V. Elzhov et al., “Study of Modified TBA Driver Scheme”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA5, pp. 3393-3395.
- E. Acerbi, G. Bellomo, M. Castiglioni, E. Fabrici, and F. Resmini, “Beam Extraction Studies for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1115-1118.
- M. Aslaninejad, M. J. Easton, J. Pasternak, K. J. Peach, J. K. Pozimski, and T. Yokoi, “The Design of the MEBT for the PAMELA Medical FFAG”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB034, pp. 3960-3962.
- M. Dohlus, A. Kabel, and T. Limberg, “Uncorrelated Emittance Growth in the TTF-FEL Bunch Compression Sections Due to Coherent Synchrotron Radiation and Space Charge Effects”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP34G, pp. 1192-1194.
- S. Fatehi, R. Aslani, and M. R. Khabbazi, “ILSF Storage Ring Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD007, pp. 3506-3508.
- L. Groening et al., “Coherent Synchrotron Radiation Measurements in the CLIC Test Facility (CFT2)”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TH206, pp. 726-730.
- R. M Bryant, R. W. Carey, R. V. Claybourn, G. Pavel, and W. J. Schaefer, “National Ignition Facility Control Network Design and Analysis”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THDT004, pp. XX-XX.
- I. J. Gillingham and T. M. Cobb, “MalcolmJS: a Browser-Based Graphical User Interface”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1869-1872.
- A. J. T. Holmes, “The Development of High Current Singly Charged Ion Sources”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 93-98.
- J. E. Dey and I. Kourbanis, “A New Main Injector Radio Frequency System For 2.3 MW Project X Operations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP131, pp. 1079-1081.
- Y. W. Kang et al., “Development and Testing of High Power RF Vector Modulators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS075, pp. 2508-2510.
- M. Boussoukaya, M. Bergeret, R. Chehab, M. Franco, and B. Leblond, “Photoemission in Nanosecond and Picosecond Regimes Obtained from Macro and Micro Cathodes”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 325-328.
- B. Rusnak, P. Fitsos, M. Hall, P. Peaslee, and R. Souza, “A High-Intensity Neutron Production Source based on Rotary Valving”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA14, pp. 1385-1387.
Back to search