Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Enegren, R. Burge, and D. A. Dohan, “A Modular RF Control System at TRIUMF”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 550-553.
[n] D. Horan and Y. Kang, “Design and Construction of a 1-MW, 352-MHz RF Test Load”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P036, pp. 3687-3689.
[n] M. Bozzolan, “BPM Time of Flight Measurements for Setting-up the RF Cavities of the CERN Linac4”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 879-881. doi:10.18429/JACoW-LINAC2018-THPO084
[n] S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
[n] F. Zimmermann, G. Yocky, D. Whittum, D. McCormick, and S. Horton-Smith, “A Beam-Timing Monitor for the SLC Final Focus”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D035, pp. 477-479.
[n] G. Decker et al., “Global DC Closed Orbit Correction Experiments on the NSLS X-Ray Ring and SPEAR”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2275-2278.
[n] A. Loulergue et al., “Baseline Lattice for the Upgrade of SOLEIL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4726-4729. doi:10.18429/JACoW-IPAC2018-THPML034
[n] A. C. C. Villari et al., “PK-ISIS: a New Superconducting ECR Ion Source at Pantechnik”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOCK01, pp. 26-26.
[n] N. Inabe, “FIXED-FREQUENCY RING CYCLOTRON (fRC) IN RIBF”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P15, pp. XX-XX.
[n] T.-C. Yu et al., “Adaptive Control of Klystron Operation Parameters for Energy Saving at Storage Ring of TPS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3748-3751. doi:10.18429/JACoW-IPAC2021-THXC07
[n] F. Turkot, W. E. Cooper, R. Hanft, and A. McInturff, “Maximum Field Capability of Energy Saver Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3387-3390.
[n] A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 114-117. doi:10.18429/JACoW-MEDSI2018-TUPH34
[n] I. J. Gillingham and T. M. Cobb, “MalcolmJS: a Browser-Based Graphical User Interface”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1869-1872. doi:10.18429/JACoW-ICALEPCS2017-THPHA184
[n] K. Zhao et al., “Laboratory Activities on RF Superconductvity at Peking University”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B06, pp. XX-XX.
[n] C. M. Bhat, “Measurements of Higher Order Modes in 3rd Harmonic RF Cavity at Fermilab”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 787-790.
[n] G. Morgan et al., “Superconducting Magnet System for the AGS High Energy Unseparated Beam”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1164-1168.
[n] M. L. Lopes, “SolCalc: A Suite for the Calculation and the Display of Magnetic Fields Generated by Solenoid Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 445-447. doi:10.18429/JACoW-IPAC2014-MOPME031
[n] L. T. Huang et al., “Test of the Tune Measurement System Based on BBQ at HLS-II Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4926-4928. doi:10.18429/JACoW-IPAC2018-THPML111
[n] C. M. Bhat and P. S. Martin, “Radiation Shielding of the Main Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA12, pp. 2105-2107.
[n] R. D. Ryne, C. E. Mitchell, J. Qiang, B. E. Carlsten, and N. A. Yampolsky, “Large-scale Simulation of Synchrotron Radiation using a Lienard-Wiechert Approach”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP036, pp. 1689-1691.
[n] E. Gluskin et al., “The Ellipitical Multipole Wiggler Project”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ17, pp. 1426-1428.
[n] G. H. Morgan et al., “Construction and Results of the 50 mm Short R&D Dipole Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2167-2170.
[n] T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3704-3707.
[n] S. S. Mohite, R. Hettinger, K. Knie, and I. J. Petzenhauser, “Development of 400 kA Pulsed Power Supply for Magnetic Horn at FAIR Antiproton Target”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 517-519. doi:10.18429/JACoW-IPAC2014-MOPME066
[n] G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2240-2243. doi:10.18429/JACoW-IPAC2019-WEXXPLS3
[n] A. Stillman, “Laser Compton Polarimetry of Proton Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB15, pp. 2560-2562.
[n] A. Cabrespine, Y. Dupuis, and C. Bieth, “RF System of the Orsay Isochronous 80-Inch Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F03, pp. XX-XX.
[n] E. Trakhtenberg, B. Brajuskovic, P. Den Hartog, and G. Wiemerslage, “New Insertion Device Vacuum Chambers at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB003, pp. 830-832.
[n] I. Wilson and H. Henke, “Thermal Analysis and Loss in Shunt Impedance of the LEP Accelerating Cell”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3590-3593.
[n] Z. Zhang et al., “Tunable High-Intensity Electron Bunch Train Production Based on Nonlinear Longitudinal Space Charge Oscillation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1782-1784. doi:10.18429/JACoW-IPAC2016-TUPOW018
[n] T. Y. Zhou et al., “Design of Bunch Length Measurement System at the IRFEL Using a Martin-Puplett Interferometer”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 178-180. doi:10.18429/JACoW-IPAC2016-MOPMB039
[n] M. Hara et al., “Storage Ring Design of SPring-8, 8 GeV Synchrotron Radiation Facility in Japan”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 466-469.
[n] K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
[n] T. F. Godlove et al., “Injector Design for a Model Electron Ring at the University of Maryland”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V038, pp. 1959-1961.
[n] S. Yu et al., “Heavy Ion Fusion 2 MV Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE01, pp. 1178-1182.
[n] R. E. Laxdal et al., “The Injector Cryomodule for e-Linac at TRIUMF”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOCS6, pp. 1469-1471.
[n] M. Reichanadter, C. M. Bhat, C. Crawford, and P. S. Martin, “A High Intensity Beam Absorber Corebox for the Fermilab Main Injector Abort System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P014, pp. 243-245.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Enegren, R. Burge, and D. A. Dohan, “A Modular RF Control System at TRIUMF”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 550-553.
- D. Horan and Y. Kang, “Design and Construction of a 1-MW, 352-MHz RF Test Load”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P036, pp. 3687-3689.
- M. Bozzolan, “BPM Time of Flight Measurements for Setting-up the RF Cavities of the CERN Linac4”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 879-881.
- S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
- F. Zimmermann, G. Yocky, D. Whittum, D. McCormick, and S. Horton-Smith, “A Beam-Timing Monitor for the SLC Final Focus”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D035, pp. 477-479.
- G. Decker et al., “Global DC Closed Orbit Correction Experiments on the NSLS X-Ray Ring and SPEAR”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2275-2278.
- A. Loulergue et al., “Baseline Lattice for the Upgrade of SOLEIL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4726-4729.
- A. C. C. Villari et al., “PK-ISIS: a New Superconducting ECR Ion Source at Pantechnik”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOCK01, pp. 26-26.
- N. Inabe, “FIXED-FREQUENCY RING CYCLOTRON (fRC) IN RIBF”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P15, pp. XX-XX.
- T.-C. Yu et al., “Adaptive Control of Klystron Operation Parameters for Energy Saving at Storage Ring of TPS”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3748-3751.
- F. Turkot, W. E. Cooper, R. Hanft, and A. McInturff, “Maximum Field Capability of Energy Saver Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3387-3390.
- A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 114-117.
- I. J. Gillingham and T. M. Cobb, “MalcolmJS: a Browser-Based Graphical User Interface”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1869-1872.
- K. Zhao et al., “Laboratory Activities on RF Superconductvity at Peking University”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B06, pp. XX-XX.
- C. M. Bhat, “Measurements of Higher Order Modes in 3rd Harmonic RF Cavity at Fermilab”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 787-790.
- G. Morgan et al., “Superconducting Magnet System for the AGS High Energy Unseparated Beam”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1164-1168.
- M. L. Lopes, “SolCalc: A Suite for the Calculation and the Display of Magnetic Fields Generated by Solenoid Systems”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 445-447.
- L. T. Huang et al., “Test of the Tune Measurement System Based on BBQ at HLS-II Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4926-4928.
- C. M. Bhat and P. S. Martin, “Radiation Shielding of the Main Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA12, pp. 2105-2107.
- R. D. Ryne, C. E. Mitchell, J. Qiang, B. E. Carlsten, and N. A. Yampolsky, “Large-scale Simulation of Synchrotron Radiation using a Lienard-Wiechert Approach”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP036, pp. 1689-1691.
- E. Gluskin et al., “The Ellipitical Multipole Wiggler Project”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ17, pp. 1426-1428.
- G. H. Morgan et al., “Construction and Results of the 50 mm Short R&D Dipole Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2167-2170.
- T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3704-3707.
- S. S. Mohite, R. Hettinger, K. Knie, and I. J. Petzenhauser, “Development of 400 kA Pulsed Power Supply for Magnetic Horn at FAIR Antiproton Target”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 517-519.
- G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2240-2243.
- A. Stillman, “Laser Compton Polarimetry of Proton Beams”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB15, pp. 2560-2562.
- A. Cabrespine, Y. Dupuis, and C. Bieth, “RF System of the Orsay Isochronous 80-Inch Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63F03, pp. XX-XX.
- E. Trakhtenberg, B. Brajuskovic, P. Den Hartog, and G. Wiemerslage, “New Insertion Device Vacuum Chambers at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB003, pp. 830-832.
- I. Wilson and H. Henke, “Thermal Analysis and Loss in Shunt Impedance of the LEP Accelerating Cell”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3590-3593.
- Z. Zhang et al., “Tunable High-Intensity Electron Bunch Train Production Based on Nonlinear Longitudinal Space Charge Oscillation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1782-1784.
- T. Y. Zhou et al., “Design of Bunch Length Measurement System at the IRFEL Using a Martin-Puplett Interferometer”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 178-180.
- M. Hara et al., “Storage Ring Design of SPring-8, 8 GeV Synchrotron Radiation Facility in Japan”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 466-469.
- K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
- T. F. Godlove et al., “Injector Design for a Model Electron Ring at the University of Maryland”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V038, pp. 1959-1961.
- S. Yu et al., “Heavy Ion Fusion 2 MV Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE01, pp. 1178-1182.
- R. E. Laxdal et al., “The Injector Cryomodule for e-Linac at TRIUMF”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOCS6, pp. 1469-1471.
- M. Reichanadter, C. M. Bhat, C. Crawford, and P. S. Martin, “A High Intensity Beam Absorber Corebox for the Fermilab Main Injector Abort System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P014, pp. 243-245.
Back to search